MX518 Play CF always jumps by itself mouse sensitivity

It is recommended that the landlord buy a mouse pad, or the problem of damage to the components in the landlord's mouse Sensitivity refers to the speed at which the mouse moves on the monitor, the lower the sensitivity, the slower the movement speed The crosshair movement speed depends on 4 conditions: 1, the mouse itself and DPI2, the quality of the mouse pad 3, the width of the monitor 4, the setting of the sensitivity in the game The sensitivity depends on: 1. The level of yourself and the opponent.

2. Game mode - whether it is knife battle, individual mode, team competition, or blast mode. 3. The way of fighting between the enemy and the enemy - it is a casual field battle. It's still about the organization, the coordination, and the very cautious game.

One thing is certain, it's not that slower is better. It depends on their different fighting styles. If you like to walk actively, you can speed it up; If you like to react and get stuck, you naturally have to be slower, because if you play with a master, the victory or defeat is in the millimeter.

Knife battles need to be a little faster, the team needs to be moderate, the blasts can be a little slower, and the matches can be a little slower. The level is low, it needs to be slightly faster; The level of entry, you can adjust it appropriately; The level is medium, you can try lower; If the level is high, the judgment is accurate, the reaction is fast, and the consciousness is good, you can try to be a little slower. However, fast or slow, is only relative.

Slow is not always better. The right fit is the best. Only when you feel that it is not suitable, you can turn it down.

The first question is that the speed of the mouse depends on how you adapt to it, how to adapt to it, but the thing that must be turned off is to control the inside of the panel, and the pointer sensitivity must be turned off, otherwise the mouse will lose frames, which means that it is not effective, cf or slow down a little bit, and the speed of the control panel will be pulled to the 3rd grid, and then enter the cf to open a 7-20 between playing sniper The second question The mouse pad is cheap Long-term is within the hellfire It is very cheap within 50 and it looks good Many series. Remember! Buy a medium or large pad Small pad, this mouse is very uncomfortable to use, and the place is small,。。

The third question, the sensitivity of this mouse is 800 before the driver is installed, and after the driver is installed, you can go to the advanced settings to adjust the maximum resolution is 1800 There are 3 gears You can also adjust it to 5 gears It is best to use 3 to play CF The resolution is set by yourself The default 3 gears in the driver The resolution is 1 gear = 400 2 gears = 800 3 gears = 1800

Remember to give me extra points, buddy.

Both mirrors are set between 5-20, it depends on your personal habits, if you don't adapt to it, other people's suggestions are meaningless to you. My setup is a 9 15 mouse pad, so it's up to you to use whatever you want, but don't be too small, mine is a bit small.

It's up to you.

That's what I use with the MX518. I installed the driver. 700dpi..I play CS. Mouse sensitivity is...If you feel slow, you can adjust it online. Similarly. It's fast to adjust downward.

There really is no fixed parameter for this mouse sensitivity. Look at the individual.

The outside is suitable according to your personal preferences.,Remember not to be more than half and be sure to improve accuracy.,Inside according to what mode you play.,It's best not to exceed 15.,Just the gun can be lower.,As long as the bullet is good to throw.,Even if it's adjusted to 0.,I'm generally just shooting 0 field play 4,Play sniper outer mirror 10 endoscope 16,The main thing is what you think is easy to use.,I have a friend who plays ju inner lens direct 50 still makes people call sao I hope it can help you.,As for your mouse distortion, Take a look at a different mouse pad to try, play CF mouse can not be light, it is easy to distort if it is light, thank you!

If you have setpoint installed, my opinion is to turn off the pointer acceleration, the pointer speed is set to 5 11, and the dpi hits 1200; If you feel "fast", you can reduce the pointer speed appropriately.

It also has to do with your resolution settings.

Turn off the mouse acceleration first, 800dpi game speed 2-4 400dpi game speed 7

The 800 is not very effective, the accuracy is not as good as IE IO, and I feel after a headshot of 7W.

Now start with 400dpi, game speed 7, with Zowie's mouse pad TF series, half an hour is T once.

Set the dpi to 400 and adjust the mouse speed slightly higher in the control panel.

Don't be too fast, 1600 is too fast, the crosshair will be emperor when aiming, 800 and 400 are fine. Personally, I play the slowest 400, which I think will be very stable!

It depends on what gun you use, if it's not a sniper, 800 is fine.

You can't set it, the pointer becomes higher because in the process of lifting up, the mouse not only changes in height, but your hand also unconsciously moves the mouse forward, so it becomes taller, not the problem of the mouse. I'm sure you can feel it, it's really unlikely that this kind of thing happened to MX518.

You don't have to mess around, but there's a problem with the 518, which is that it drops frames when you move to the bottom right.

Second, shooting games have the recoil of the gun, you are too careful, and there is no problem with the mouse.

It's completely your heart, this is the normal recoil of the game, and the mouse has no problem at all, if you don't believe it, you can create a new drawing on the desktop and then hold down the mouse to see if the drawing is a small dot If so, it's not a mouse problem.

Inevitable. You pick up and put the mouse down, and the pointer is definitely moving. It is estimated that if you change the dpi to 800dpi, 518dpi is adjustable, and the slowest one is 800dpi, the higher the dpi, the faster you feel.

It's enough to play CF800, in fact, it's more. Generally, 400 is enough. Usually put down, pay attention to drag the mouse down a little.

Let's find out for yourself. Get used to it, and this phenomenon will be much less.

PS 2 is a green port with a round hole, which is usually next to the purple round hole connector on the keyboard.

When it's over, turn on the driver to adjust the dpi hz.

Generally the sudden flow is so high, this looks used to it, for the commonly used 5 below, suddenly adjusted to greater than 15, he will not be able to stand it, low quasi-steady, suitable for point shooting, in order to pursue high headshots, masters are generally in 2 5, the gun is 0, what they pursue is to kill the most people with the least bullets, but the low is not very flexible, there is an advantage in medium and long distances, close encounters, there is an enemy behind the fuck, this is the time to test a master, through the radar, sound, The trajectory of the bullet is used to judge the enemy's position, jam the position, cross the line on the headshot, kill the enemy in seconds, and of course the pace is also very important.

If the sensitivity is low, the positioning is accurate, and when the manual amplitude is large and the mouse movement amplitude is small, the accuracy will increase, otherwise the muzzle will shake far away. In my opinion, I'm not a master, but I feel this way when I play, and I like low sensitivity.

Their mouse is larger, so it's better to shoot at a long distance, and it's good after a long time.

If the master reacts quickly and has high sensitivity, the gun will be unstable when it passes. High sensitivity, the mouse can not be aimed accurately if it moves slightly.

The sensitivity is low, and it is easy to control the gun, and it will not move the mouse, and the crosshair will shake very much.

It is inevitable that there is recoil in shooting in CS, no matter what mouse you use, there is recoil, and the reticle will definitely swing with recoil. If there is no recoil, it is cheating.

Inaccurate positioning may be that the mouse acceleration is not removed, first remove the hook to improve the accuracy of the mouse in the mouse attributes, and then add a blank space after "exe" in the target bar in the CS desktop shortcut attributes.

noforcemaccel -noforcemparms -noforcemspd.

And then all that's left is to practice your skills ...

PS:518 is a good mouse,GUX Cyx Roman is used 518.。。。 He's all gun men.

First, Logitech 518 is no longer **, but I have used this, and the mouse will not scurry, but the 518 has a problem, that is, it will lose frames when moving to the lower right corner.

Second, shooting games have the recoil of the gun, you are too careful, and there is no problem with the mouse.

It's completely your heart, this is the normal recoil of the game, and the mouse has no problem at all, if you don't believe it, you can create a new drawing on the desktop and then hold down the mouse to see if the drawing is a small dot If so, it's not a mouse problem.

It's possible that your mouse pad doesn't work well with the mouse.

In the past, playing CS in an Internet café was easy to have a crosshair flying around a certain corner.