The sewage in the drain pipe of Haier s washing machine stinks

Cleaning the drain regularly can avoid odors.

Cleaning method: clean with a special cleaning agent, do not need to disassemble the washing machine, as long as the cleaning agent is dissolved, and the water is directly soaked in the washing machine barrel, its unique surfactant and a variety of additives can suck out the dirt in the interlayer of the washing machine. If you choose a washing program after diluting it with a detergent without laundry, it will also work well.

Currently, there are washing machine cleaners on the market that are exclusively sold.

Cleaning frequency: once every 5 months.

Descaling of the inner drum of the drum washing machine.

1. Take down the drain pipe of the washing machine and put it on an empty bucket (to a certain height), close the water inlet valve and the front door;

2. Pour three bottles of water bottle with descaler (commercially available) into an empty container, prepare and stir well according to the ratio of descaler water = l 2;

3. Open the "detergent addition box" and pour the mixed descaler solution from the detergent addition box, taking care not to splash on the **;

4. Press the power switch of the washing machine, set the program to "washing program" (the longest time selection), and rotate the washing cylinder; After the descaling liquid is discharged from the drain pipe to the barrel, the discharged descaling liquid is added from the detergent addition box, and so on many times until the program is completed, and the filter is opened to clean the filter screen;

It shows that the water pipe was out of water last time.

The reasons, methods and steps for cleaning the sewage outlet of Haier drum washing machine are:

1. First of all, explain why you want to clean the drain in the lower right corner, because many clothes will carry a lot of lint or sundries in the pockets, which will block the drain, causing the water to be unable to drain out, causing the washing machine to malfunction.

2. After finding the drain in the lower right corner, you can observe the structure of the drain, some of the drains are popped open, and some of the drains have a button to press open, the following picture of the drain is the button to press open, remember not to open hard, the way to open the drain is very simple.

3. After opening, you can observe the structure of the shooting port. First of all, the big rotating part in the middle is the filter of debris, that is, the debris will pass through the filter screen in the middle of this large knob, the right is the sewage outlet, which can be opened, and the top pull ring is the emergency brake, that is, the emergency brake.

4. First of all, unscrew the big knob in the counterclockwise direction, and then pull it out, you will find that there are a lot of lint and debris on it, clean it up, it is best to clean up the debris in the hole, if there is a condition, you can flush it with water, if it is blocked first, you will drain the dirty water after you pull the big knob.

5. Then there is small drainage, which is also emergency drainage, if your washing machine is broken or the power is cut off, what should you do if there is half a tank of water in it? This opens the yellow lid, and the pipe can be drained to the outside world, and the water pressure is still relatively large at the beginning, so be careful not to spray on the shoes.

6. Finally, after the water is cleaned, all this thing is reset, and the knob in the middle must be rotated in place, otherwise it will not be able to block foreign objects, which will lead to the blockage of the drainage pipe in your home, and then cover the lid and restore it all, this sewage outlet is best cleaned once a month or so, and if the washing machine has an alarm, it should be cleaned in time.

Hello 1First of all, you need to ensure that the washing machine is in a power-off situation; 2.Then we press and hold the drain switch in the lower right corner with our finger to press the tablet and turn it on.

3.At this time, we find the small black round cover, rotate it directly counterclockwise and unscrew it, and some sewage will flow out of it. 4.

We take out the dirt inside the valve and clean it with clean water. 5.Finally, we put the black valve back in its original position, tighten it clockwise, and finally close the drain.

Generally, there is a small lid at the bottom right of the washing machine, and when you open this small cover, you will see the drain. If you've never looked at it, look at the bottom right of your washing machine to see if there's a small lid.

The reason for this situation should be that there are washing residues or foreign objects in the drain valve of the washing machine, so that the valve core of the drain valve cannot be completely closed, and there is leakage.

If you need to open the drain valve for cleaning, if you are not good at dealing with it, it is recommended to contact the after-sales service department of Haier washing machine according to the brand and model of the washing machine, and ask professionals to repair and inspect the drain valve of the washing machine.

Haier's automatic washing machine is always draining water when washing clothes, and this problem lies in the drain valve, which has several possibilities: 1. The rubber ring of the drain valve is aging and cracking, 2. The drain port of the drain valve is closed with debris, and 3. The drain valve with faulty control panel is often electrified.

If it is a washing machine, it may be caused by the fact that the drain valve is not reset, and the reason for not resetting is that there are some coins or some other business in it, just take it out.

1. First unplug the power of the washing machine, if you have just used it, you can wait for a few minutes to ensure that there is no static electricity or heating due to electricity.

As a result, the body of the washing machine is inconvenient to touch.

2. When we opened the lid of the washing machine, we found that there was still water in the washing machine that was difficult to drain quickly.

3. Prepare a basketball pump and a pedal bicycle pump.

4. Prepare a basin and put the end of the drain pipe of the washing machine into the basin to prepare for the dirty water.

5. Disassemble the pump pipe and connect it to the drain pipe of the washing machine.

6. After the socket is successful, pinch the connection between the pump and the drain pipe with your hand to ensure that the seal does not leak, and then push the pump and repeatedly push the pump to make the dirt in the drain pipe of the washing machine no longer attached to the drain pipe wall.

7. Dismantle the pump, connect the drain pipe with the water wheel head, and put the end of the drain pipe into the basin and flush it repeatedly.

8. If there is still dirt in the drain pipe, you can use a foot pump to put it directly on the drain pipe.

9. Slowly push the pump up and down, pay attention to the rhythm, and let the water and sludge flow out slowly.

10. Repeated cleaning several times can successfully clean the sludge in the drainage pipe.

1. Check whether the sewer is unobstructed and whether there are any foreign objects affecting the drainage. If there is a blockage, you can pour the right amount of alkali into the drain, which will remove grease and rust from the pipes more effectively.

2. If the sewer is not blocked, but the smell returns, a water seal can be used.

Fill a thin plastic bag with water, seal the mouth of the bag, and place it in the mouth. Sewer seal odor.

3. It is best to keep the water in the bowl-shaped water storage structure of the sewer at the same time, which can more effectively prevent the odor from flowing out.

When the washing machine is used for too long and has not been cleaned for a long time, there will definitely be some dirt in the inlet pipe of the washing machine, which will cause the inlet pipe of the washing machine to stink. How to deal with the washing machine inlet pipe when it stinks: 1. When cleaning the washing machine inlet pipe, you first need to close the water inlet, and then unscrew the bolts on the water inlet on the washing machine to carefully remove the washing machine water inlet pipe.

Then clean it up with a brush. Finally, rinse away the dirt in the inlet pipe of the washing machine with water. Finally, use professional maintenance tools to install the washing machine inlet pipe.

2. You can buy a special washing machine cleaner and clean it with a special cleaning agent, you don't need to disassemble the washing machine, you only need to dissolve the cleaning agent and soak it directly in the washing machine with water. Because of its unique surfactant and a variety of additives, it can suck out the dirt of the washing machine inlet pipe, so that it can avoid the work of disassembling the washing machine inlet pipe. 3. If the user really doesn't want to clean up the water inlet pipe of the washing machine, you can also go to the hardware store to buy a new water inlet pipe.

Then use professional maintenance tools to disassemble the old water inlet pipe, and then use professional maintenance tools to install the new washing machine water inlet pipe again. It is recommended to clean and clean the washing machine regularly.

Hello. The simplest thing is to loosen it with the drain pipe hoop that connects the drain pipe valve outlet, and then remove the drain pipe for unclogging. 2..

If the drain pipe of the washing machine is not cleaned in place for a long time, resulting in a lot of water stains and dirt on the inner wall of the washing machine drain pipe, which affects the drainage of the drain pipe, the best way to deal with such a drain blockage, our best way is to clean the drain pipe with an acidic cleaning agent, let the water stains and dirt completely discharge the pipe, and then pour clean water to rinse it.

2.Damaged filter After the filter is damaged, there will be a lot of residue blocking the drain pipe, which needs to be cleaned and replaced with a filter.

3.Clogged valve may be because the washing machine filter is blocked, then open the filter and clean up the debris inside.

4.Drain Pipe Problem It may be that the drain pipe of the washing machine has been damaged, and it is recommended to replace the drain pipe again.

There is no dirt at the drain of the Haier washing machine, and it does not drain water, what's going on.

Your Haier washing machine does not drain water, which may be caused by the following reasons: 1. The drainage pipe is not smooth or the drainage pump is blocked; 2. The computer board is broken; 3. The drain pump is in poor contact with the computer board or the drain pump is bad. 4. Check whether the drainage pipe is bent or the height is too high, open the filter door, check whether the filter is blocked 5, if the filter is not blocked, check whether the drainage pipe can be drained 6, the drainage pipe is not chaotic and can be drained, check whether the drainage pump is loose, whether the drainage pump has been burned, whether there is a voltage to the drainage pump 7, if the drainage pump is not connected to the voltage, focus on checking the program controller or computer board.

8. In addition, when the washing machine does not drain water, it is also necessary to see whether the drain pump and drain pipe are blocked, whether the impeller is stuck by foreign objects, and whether the drainage is not smooth due to the bending of the soft water pipe from the outer cylinder to the pump. Hope it helps.