How to start the system user interface of Huawei mobile phones?

Flashing is the equivalent of a redo system on a computer. XP has a Tomato Garden Edition, a computer company special edition, and something like that. The flash package is based on the original official, adding some new patches or personalized things.

In fact, it is not difficult to brush the machine, but there are more precautions, it doesn't matter if you brush it or not, the key is that the machine is stable and used.

Flashing is actually done through software installed on the computer. Of course, the phone is connected to the computer through a cable, not directly on the phone. So to put it simply, flashing the computer is to install the software to be upgraded, such as 38R, to the mobile phone through the PST software installed on the computer.

Flashing simply means rewriting the software program in the phone through a data cable or infrared.

The purpose of flashing is mainly to solve the patches introduced by the manufacturer to solve the bugs in the old version of the software, generally to solve the problem of slow response speed, low volume, SMS template, crash, display brightness, etc.; Others are designed to enhance the functionality of the original model, such as adding digital zoom, frame types, image capabilities, etc., to enhance its functionality without changing the phone's hardware.

Under normal circumstances, KF can be brushed for free, and the speed is also very fast, but you must back up your personal contacts and other information before brushing. If your phone is working properly, you don't need to brush it. It's okay to brush it yourself, but you have to go to the online ** mobile phone software.

Under normal circumstances, you will not enjoy the warranty if you flash the machine yourself. Firmware upgrades similar to *** and so on.

It is to help the phone reinstall the system.

The system user interface of Huawei phones is stopped, usually due to the deletion of the core system applications or an internal system error.

You can do this as follows.

Hello lz! The phone's system user interface is stopped, usually due to the deletion of the system's core applications or an error within the system.

LZ can be operated as follows:

1. If the phone can still enter the settings, you can restore the factory settings in the settings Backup & Reset.

2. If the mobile phone can no longer enter the settings or the mobile phone can no longer operate normally, you can directly deduct the mobile phone battery to force the mobile phone to turn off, replace the battery after 10 seconds, and press and hold the mobile phone "Volume +" and "Power Button" at the same time until you enter the mobile phone recovery mode.

The following has been officially explained by Recovery as an example:

Note: In recovery mode, pressing the volume up and down keys indicates selection, and pressing the power button indicates OK.

1. Select and confirm: Wipe Data Factory Reset

2. Select and confirm: wipe cache partition

3. Select and confirm: Reboot System Now

What is provided here is the operation instructions of the official recovery, if it has been flashed into the third-party recovery, then directly look at the Chinese menu for double clear operation.

Emphasis: The above two methods will cause the phone data, settings and self-installed apps to be cleared, and the phone will return to its initial state.

3. If the mobile phone system cannot be made normal according to the above two methods, then it can only mean that the core application of the system has been deleted by mistake or has been seriously damaged, so there is only one way left to flash the phone.

If you choose to flash the phone, it is recommended that LZ first reply to the official firmware system on the phone, and then flash the third-party ROM.

How to flash the official firmware:

3. After opening the official package compressed package, put the dload folder (confirm that there are files below) into the root directory of the SD card (take out the SD card of the mobile phone and use the card reader).

4. Insert the SD card back into the phone, install the battery, press and hold the volume up, volume down and power on buttons, and do not let go until you enter the hboot interface and release the button, waiting for completion.

After the phone has been restored to the official firmware system, if you like, you can re-unroot or flash the third-party ROM directly. After all, if you can directly delete the core application of the mobile phone system or modify the system core, this in itself shows that the mobile phone is rooted or has flashed into the third-party ROM.

The steps to set up the HUAWEI phone interface are as follows:

2. Press and hold on the blank space of the mobile phone desktop until the interface as shown below appears:

It's a problem with the phone screen.