Computer overclocking problem, how to solve the computer display overclocking

What about this, I can only throw bricks and stones, because I haven't used 845, I don't know if yours is SDR memory or DDR.

Generally speaking, overclocking is the external frequency of the super CPU, because the frequency doubling is generally locked.

You look at what the current external frequency of your motherboard is, probably

On this basis, add a little bit each time, don't be greedy, and eventually find the one you are satisfied with; However, it is recommended that you try to use standard external clocks, i.e., , which can ensure that the graphics card and other devices work normally.

If you add it to a certain extent, you find that it can be started, but it is not stable enough (that is, the occasional blue screen), you can consider adding a little voltage, but be careful not to add more, + or so, after all, safety is important.

If it can't be started (black screen), you have to discharge the motherboard, generally speaking, you can change the COMS jumper, pay attention to the motherboard manual.

To put it simply,Go directly to the BIOS to find the frequency and voltage options,And then directly change the external frequency,And then my computer,Your CPU frequency will become higher in the attributes,Novice recommends Xiaochao,It is recommended not to add voltage,Although it will write stably,But it will damage the life of the hardware。

Today's computers, are not like the previous computers, the former computer overclocking on the line, now it's not so simple, the current overclocking is just software overclocking, so, the effect is not ideal, if you want hardware overclocking, you have to learn how to build the wire, the risk factor is 99%.

I didn't see the problem, and there were a lot of copies upside down on my head.

It is recommended that you look for an article to read before, even if it is told here, it can only be said in general terms, after all, there are too many differences between old things and new things, and there are different places to start.

Overall, if you're a newbie, start with the BIOS and don't play the "hard" ones to avoid accidents.

Monitor the temperature of the CPU and other components, steadily increase the frequency and voltage, and remember to make progress in "stability".

Buy a good fan, just don't go overboard.

I don't know what the landlord wants to exceed? What's the problem? Upstairs is in a hurry to hand over the answers.,This will only be the bull's head and the horse's mouth.。。。

Recently, Qi Kong has received a lot of private messages,Many friends asked how to solve the problem of overclocking on the computer screen all the time,In fact, the biggest possibility is that we did not set the appropriate screen refresh rate,In order to make everyone's computer screen return to normal,The following will explain in detail the method of overclocking the computer display of the solver,Let's take a look。

The specific steps are as follows:

First of all, on the desktop of the computer, click the start menu in the lower left corner, select Settings to open, and enter the system;

After entering the system, in the display interface, click Advanced Display Settings to open the display adapter properties of Monitor 1;

Finally, we select the monitor and set the screen refresh rate to the desired frequency.

The above is how to solve the problem of computer display overclocking brought to you, I hope it can help you.

Overclocking is the process of increasing the operating frequency of hardware components (such as CPU, graphics card, memory, etc.) by adjusting system settings to optimize performance. However, excessive overclocking or improper use can cause various problems on the computer, such as blue screens, crashes, etc. If your PC shows up overclocking, here are some common fixes:

1.Reset the overclocking settings.

If you've previously overclocked your PC, it is possible that these settings are causing an overclocking warning. In this case, the easiest way to fix this is to reset the overclocking settings. You can go into the BIOS or use the overclocking software to restore the frequency settings to the default values.

2.Check the cooling system.

Overclocking can increase the heat of hard lead dust components, which in turn can affect the stability of your computer. If your computer has been overclocked and it says overclocked, there may be a problem with the cooling system. Huaizen can clean the fan, replace the heat dissipation glue, or increase the fan speed.

3.Restore the system.

Improper overclocking may cause the system to crash. If your overclocking settings make your PC unusable, using a revert to its original state may be the only way to fix it. Back up your system data to avoid data loss, use a recovery tool to restore your computer to its original state, and reconfigure your computer's system settings.

Summary. Overclocking is a way to optimize your computer's performance, but incorrect overclocking settings can cause all sorts of problems on your computer. If your computer shows that you're overclocked, try resetting your overclocking settings, checking your cooling system, or restoring your system.

However, the best way to do this is to choose a more powerful computer or hardware component before switching to overclocking, so that you can avoid all kinds of problems caused by overclocking.

Here's how to fix it:Operating device: Lenovo laptop.

Operating system: win10

Operating procedure: Lenovo PC Manager.

1. First of all, open Lenovo PC Manager and click to open the game mode, as shown in the figure below

2. Then click on the red arrow to overclock the game, as shown in the figure below

3. Then click to enable the memory overclocking indicated by the red arrow, as shown in the figure below

4. Finally, you can see that the memory overclocking is turned on, as shown in the figure below