The iPhone phone won t turn on, and it turns on after long pressing the home to turn it on, is it co

Smartphones can sometimes freeze, which can be solved by forcing them on.

How to deal with the iPhone not booting normally:

1. Check whether the iPhone has physical damage, such as: bending deformation or water ingress and other accidents;

2. Use the original data cable and charger to charge the iPhone, check whether the iPhone is responsive, and the battery may not turn on if the battery is insufficient;

3. Force restart your iPhone;

4. If there is still no response or cannot be turned on normally after the above operations, it is recommended to go to the local Apple official or authorized after-sales service.

Turn off again, and when you turn it on, just press the power button to count it as normal.

Connect your device to your computer – press and hold the home and power button at the same time – and after shutting down, release the power button and release only the power button! - iTunes will show the device that has detected a recovery mode - Release the Home button - click Restore and see if it works.

The iPhone can't be turned on, it's long.

The reason why it is useless to copy the home button and the power on and off button:

The phone was dropped; Water ingress of the mobile phone;

Failed jailbreak. How to deal with the iPhone that can't turn on:

Check to see if it's a hard injury. For example, before the phone suddenly turns white, the phone has dropped from a height or fallen into the water. In this case, please go to the repair station immediately for maintenance service, otherwise it may not be repaired due to the long power on;

If there is no hard injury, it is the phone that suddenly appears in the process of using white apples and then can not be turned on, at this time, you can usually do a recovery to solve the problem;

The situation that there is no display on the screen mostly occurs in the case of hard injuries, and the most common occurrence is falling into water. Since the iPhone can't unplug the battery, the phone will always be powered on after water gets in. It can only be sent to a repair station for repair;

It is also possible that there is no display when the jailbreak fails, please plug your phone into the computer to see if there is any prompt;

If the prompt is not recognized, and it is still not recognized after replacing the data cable, the motherboard is faulty and usually cannot be repaired by iTunes;

The debug device that is identified as DFU mode is prompted. In this case, press and hold the home button and the power button, which will usually automatically turn on and enter recovery mode after a period of time. Use a small umbrella to exit the mode.

After connecting your phone to your computer and opening iTunes, put your phone into DUF mode (press and hold the power button for 3 seconds, press and hold the home button for 10 seconds without releasing the power button, then release the power button, and only press and hold the home button until iTunes recognizes it) and then resume it directly.

First determine if it is a battery problem.

Instead of just connecting your iPhone to your computer, open iTunes and see what happens. If iTunes can't recognize it, there is only one option, send it after-sales.

I can't turn it on, what's the situation? To be specific, is it always showing an Apple logo on the phone screen, or is it just a black screen.

There are several ways to turn off your iPhone, one is to press and hold the power button in the upper right corner of the device until the screen appears "slide to power off"; Another way is to press and hold the power button and the home button at the same time, which can also be used to clear the cache.

If the iPhone wears a very heavy case or protective case, the user may have to press the power button harder, sometimes the light press does not respond, and the force has to be increased, which will cause some damage to the power button in the long run.

In fact, we have a third way to shut down, without touching any physical buttons. (Long press on the lock screen in AssistiveTouch).

Do you all like to use assistivetouch in accessibility? It's that virtual home button, the dot. You won't find the shutdown button in the virtual home button, because it's hidden behind the virtual button "Lock Screen".

The "Lock Screen" button is actually the equivalent of what we call the power button. So long press this button can also turn off.

It should be that the system card bursts, you should take it to the mobile phone store or the warranty period, take the warranty. If there is a problem with the rating, the system will continue to be completely broken.

Can't turn on? There are probably the following reasons: 1. The battery is aging ......It's the end of my life.

2. There is a problem with the system and it cannot operate normally......

3. The hardware facilities may be damaged or soaked and cannot be opened.

4. Blindly follow the trend and upgrade the system version at will.

Wait a minute. It is recommended to try plugging in the charger and trying to turn it on.

It is really not possible, it is recommended to send it to the local official after-sales service center network or professional maintenance workshop for maintenance!

It is estimated that it is because it has been jailbroken and clicked to restore factory settings, and the jailbroken phone cannot click to erase all content and settings to restore factory settings, and it will be infinitely white and the apple will not turn on normally. Now it can only be restored through iTunes reinstall the system. Here's how to reinstall:

1. On the computer side, open the latest version of iTunes, open it after installation, connect the mobile phone (the mobile phone needs to be turned off), and then press and hold the power on and off button and the home button at the same time, when you see the white Apple logo, please release the power on and off button, and continue to hold down the home button;

2. Until you see the device in the DFU state on the computer, after the computer prompts, release the home button and click to confirm the recovery in the pop-up selection box;

3. After pressing OK to restore, iTunes will pop up a page prompting that everything will be erased, and the recovery will be verified with Apple servers. Click the OK button, iTunes will automatically ** firmware, when the verification and extraction of files are completed, iTunes will automatically reinstall the ** good firmware version for the phone, wait for the installation to be successful and reactivate the phone.

Connect to iTunes on your computer via a data cable and upgrade it directly.

It is recommended to go to professional after-sales service, and it is very likely that you will become a brick by brushing it yourself.