Why can I access the Internet with the IP address of 192 168 1?

This is the internal address that the route itself is fixed to start with assigned to the PC, and some routes may not start with. If you have 2 computers connected to the router, the route assigns the IP address to the 2 computers, one and the other. *The numbers in the list vary depending on the routing settings, so please refer to the manual.

If you change the IP that it doesn't recognize, you won't be able to access the Internet.

Because the IP address is an address given to you by the network center when you surf the Internet, you can't change it yourself.

And 192 is a Class C network IP address. That is, the first digit is the network number, and the last digit* is the host number.

You can also modify the host number, then at least they are all under the same network address, and if you modify the first 3 digits, it means that the entire network address is pointing to the wrong one

To put it simply, the router you connected to applies for this network number and provides 255 ports. If someone else wants to get your information, it will be transmitted here first, and then handed over to each host through the router. Therefore, the previous one cannot be changed by itself.

Router IP:.

A Class C address that belongs to an IP address, which is a reserved IP address and is specifically used for router settings. Generally speaking, the username (case sensitive) of this address is admin, and the password is admin.

However, some routers have an IP address of and.

To explain, there are three types of recognized private IP addresses in the world, one is one is and the other is the home type.

version is adopted a lot.

Right this address,Actually, you can use the address of 10 or 172.。。

In fact, if you can also use a public IP that you are sure will not access, it is fine, but it is generally not recommended to use it.

You can change it, it's just the default one, and if you don't want to default to it, just change it.

Yes, the default is like this, you can change it to something else, as long as it is a Class C IP address.

It is the IP set by the router or switch itself, which belongs to the IPv4 range. With wondering.

Servers that belong to Australia.

It's hard to say, because there is no subnet mask, which is an important parameter to indicate the network segment.

It is the IP set by the router or switch itself, which belongs to the IPv4 range.