What is the safe distance between the railway and the tower crane?

The safety distance between the railway and the tower crane is **times the height of the pole**.

The spec was not found.

Compare electric poles, communication towers and the like, the requirement is that the distance from the railway is greater than the height of the pole.

The state stipulates that within 50 meters on both sides of the railway can be used for railway land, but the movement of this guy is big, not to mention 50 meters, 500 meters after the train, you can also hear it clearly, sometimes it is adapted, the electrified railway is now very mature in technology, radiation is to be assured, as long as it is not every day in front of the station.

According to Article 10 of the Regulations on the Protection of Railways, railway line safety protection zones shall be established on both sides of railway lines. The scope of the railway line safety protection zone is the distance from the foot of the embankment of the railway line, the top of the cutting slope or the outside of the railway bridge to the outside

a) urban areas, not less than 8 meters;

2) Residential areas on the outskirts of the city, not less than 10 meters;

3) Residential areas of villages and towns, not less than 12 meters;

4) Other areas, not less than 15 meters.

Regulations for the construction of setback railways:

1) The distance between the building setback and the nearest side of the railway, the quasi-gauge trunk line is 30m; Quasi-rail branch line and special line 20m; Meter gauge 15m;

2) The distance between the fence and the side rail on the nearest side of the railway is 10m, and the height of the fence;

3) High-rise buildings, tall structures (water towers, chimneys, etc.), dangerous goods warehouses and workshops and the nearest side of the railway side rail distance, as well as construction activities near the railway crossing shall comply with the relevant provisions of railway management;

4) The width of the separation zone of special road sections shall be determined by the competent administrative department of urban planning in conjunction with the railway department.

The general principle is not to threaten the safety of the railway.

Pro, the safety distance between the electric 35kV tower and the communication tower should be determined according to local regulations and standards. In general, this distance takes into account a variety of factors, including the technical characteristics of power and communication facilities, the surrounding environment, safety standards, and other factors. In China, the relevant departments of the State Grid have formulated the "Regulations and Friendship Models for the Construction and Quality Acceptance of Power Transmission and Transformation Projects", which have certain requirements for the safety distance between the power 35kV tower and the communication tower.

According to this specification, the safety distance between the electric 35kV tower and the communication tower is 5 meters, and the safety distance is 10 meters at the crossing point. In addition, it is necessary to take into account the surrounding environmental factors, such as local meteorological conditions, the height and fluctuation of the land, the influence of buildings and trees, etc. Sometimes, it is also necessary to survey and measure the Qinghuai field according to the actual situation, so as to obtain a more accurate safety distance.

In short, when installing the 35kV tower and communication tower in front of the electric shed, it is necessary to follow the local regulations and standards, and determine the safety distance in strict accordance with the requirements, so as to ensure the safety and reliability of the facility.

Dear, hello, the safety distance between the power 35kv tower and the communication tower needs to be evaluated and calculated according to the actual situation, the following is the reference value in general: according to the provisions of the "Electric Power Safety Production Regulations", the minimum safety distance between the power line and other facilities is: - The horizontal distance between the line and other facilities of 35kv and below should not be less than 2 meters of the vertical distance between the line conductor and the ground; - The vertical distance between the line and other facilities of 35kV and below shall not be less than the times of the vertical distance between the line conductor and the ground.

The height of the communication tower is generally lower than that of the electric 35kV tower, usually not more than 50 meters, therefore, according to the above provisions, the horizontal distance between the 35kV tower and the communication tower should not be less than 2 meters of the vertical distance between the 35kV line conductor and the ground, and the vertical distance should not be less than the multiple of the vertical distance between the 35kV line conductor and the ground. It should be noted that this is only a reference value in general, and the specific safety distance also needs to consider the height of the tower, the voltage of the power line, etc., or friendly factors, which are best evaluated and calculated by professional power and communication engineers.