ASP virus problem master enters, cheats points when the chat is good .

Yes, yes. You're an asp trojan, right?,You have to encrypt ** before uploading.。 You can go to the search for "web page **decryption", select the first one, and then copy the entire asp Trojan** into it, then encrypt it, and then save the encrypted one as an asp file.

I don't understand, I won't report the poison if I don't kill it!

Deception points: 1: There will be some points for direct simulation.

2: Play 40kb 47kb (there are still a few kbs to do the .......)) (if you can), and the rest of the simulation.

3: Rely on character data (do more good deeds to save RP......）

Kid, cheat more than 2 points.

It's better to rely on strength.

Of course, RP is critical.

As for the information. Take a look at the introduction to deception, a must-see!!

NOI2009 Hebei Provincial Team**Shijiazhuang No. 2 Middle School Li Bojie Fraud Introduction Informatics Contest Whoosh on the Internet.

You can pre-type, such as indirectly punching the table, scanning the surface interval and then scanning the table, and then violent. You can also AC Oh!

Increasing the CPU voltage can improve stability, but the power consumption of Pentium D is already relatively large, and the process is limited, so it is indeed difficult to overclock. It's not easy for you to be so much.

How do you call overclocking stability? It's just how stable it is if you don't overclock, and how stable it should be when overclocking.

If you like ultra, it is recommended to change to a pentium e21xx

You know so much that you came to ask for a jj.

Ben D is already hot, and it will be higher if it is overclocked, and the PD overclocking needs to change the radiator or water cooling, and, since you are newly bought, why do you have PD (more than the problem), a big typhoon!! That might be your memory, try asyncing.

Dude, my profession is after-sales service, I feel distressed when I see you like this, you overclocking is super foreign frequency, right? Do you want to have a fever?? The external frequency is high, the capacitance and power on the motherboard can't be felt, of course, it has to be restarted, the external frequency is a non-standard hard disk, and the hard disk will also be hot, and the low-end 650i SLI is not an overclocking motherboard, and the performance of the Intel processor with the Intel motherboard is stable

There is also memory, PCI graphics card frequency, etc., overclocking is so troublesome, how much does the performance improve? I guess it's just a feeling, right?

It's good if you don't overclock Of course it's a matter of overclocking, how much speed can you increase by overclocking What do you run, it's useless to run what pi or mark, and the speed can't increase much in practice!! If you want to be fast, change the buckle meat Now the main frequency is no longer the main indicator to measure the speed of a computer Athlon 3000+ frequency should only be fast

It's okay, don't toss, we're all here to help you, and you can't spend this little bit of money

cpu：cpu:pentium d 915

Graphics: 7600gt

These two garbage with such a good motherboard,Waste,PD is not used for overclocking,It's definitely unstable if it's overclocked.,It's for people who can't overclock.,It should be equipped with E4300It's best to over-over.,The graphics card should be 8600gt.,I use 3000+295 external frequency also has 40 degrees.,I use a hurricane warrior with a heat pipe.。

The Pentlum D is not designed for overclocking because the PD process is not very advancedTo overclock the sentence use core2 duo

Temperature, buddy.

It is obviously caused by excessive temperature. The temperature restart part written by 915 itself is 65 degrees, and it will be restarted after this temperature, and the temperature measurement part can not really show the real temperature of the CPU combinator, and the high temperature is diffused to the critical temperature, if the temperature difference is very large, the heat dissipation efficiency of the contact part is of course also very high, and it will never be wrong to tell you that it is the reason for the temperature.

Ha ha!!! Landlord!!! Of course!!

Think about it, if your computer is overclocked to a certain stage, that is, when the zero threshold is reached, your CPU and motherboard will definitely not be able to stand the temperature!! Reboot by all means!! That is to say, the heat dissipation effect is not good!!

Landlords are advised not to overclock!! After all, the computer is the best yet, and it can't run the current 3D game with large textures!! And you're also Pentium-D915, the calorific value is already high!!

It is recommended that the landlord should think about it!! But you can also take a small boost!! You can take it step by step!!

I say!!! What is running 3DMark2006 to test!! Mainly your graphics card, and your graphics card has to GPU, pixels, vertices, coloring and video screen acceleration decoding, in the process of testing, the graphics card usage accounts for %70-80!!

Especially oh!! By the way, do you set the temperature of your CPU in the BIOS!!

Also adjust the asynchronous and PCI, PCI-E frequency of the memory.

Of course, pay attention to the temperature as well.

However, like the Pentium CPU generally can't be exceeded, and overclocking will affect the life of the CPU, you are these configurations will not be outdated in 3 years, so don't overshoot.

PD-915 You better don't overdo it unless you go on water cooling.

Judging by your description, it should be caused by overclocking. After overclocking, not only the CPU frequency will rise, but other hardware devices will also increase the frequency, causing system instability. So it's better not to be over-the-top, or to a limited extent.

It's the instability caused by overclocking.

Don't forget to lock the PCIe frequency when you overclock, or the frequency of the entire system will go up, of course, you can't stand it.

In BIOS, first lock the PCIe frequency to 100MHz, and then the memory is also controlled, not too high, and then super CPU, and then use 3DMark06 to run a few more times, can run down, in order to show stability, overclocking success.

Overclocking is a test of all the hardware on your machine. I used to overshoot the clock and lost all the data on my hard drive. I guess maybe your hard drive can't stand it.

Generally, if you overclock, the integrated sound card and hard disk will be greatly affected. SuperPi only measures the overclocking performance of the CPU memory subsystem, and it may not be able to see the overall impact.

Hello landlord, hehe, I don't know if you can overclock, the wrong overclocking method or the wrong calculation of the main octave overclocking will affect the work of the processor. Let's take a look at the correct way to overclock:

CPU frequency = frequency doubling x external frequency.

Today's CPUs generally do not support frequency doubling adjustment. Therefore, the only way to achieve a higher clock is to adjust the external frequency.

For example, your CPU has an external frequency of 133 and an octave of 15

Then when you increase the external frequency to 166, correspondingly, your main frequency will reach another thing to note. There are many factors that contribute to the unsuccessful overclocking, such as heat dissipation, memory, the motherboard, and the constitution of the CPU itself. Therefore, when overclocking, you can increase the voltage of the CPU appropriately (higher than the default, then you need to strengthen the system heat dissipation).

If the system is unstable after overclocking, reduce the external frequency appropriately.

In addition, after overclocking to the main frequency doubling that the processor is exempt from, it is possible that the processor cannot bear the situation when you carry out a large amount of data transmission traffic, specifically in high flood weather, because the CPU temperature is too high due to the processor being overclocked, which directly causes the restart phenomenon, the larger the traffic, the greater the CUP workload, and the higher the temperature, so it is normal to cause the restart phenomenon, I think if the weather is cooler, you may exceed the current main frequency multiplier may be little or no when restarting.

I don't know if I can help you, hehe.

The stability of the system is a comprehensive conclusion, and it cannot be said to be stable from the normal calculation of super pi. Overclocking depends on your purpose, and other than some commercial nature, a configuration like yours doesn't feel like there's any need to overclock at all.

Haha, I've got this point, and I've been worried about this before. The bird language is not much spray, it is very simple, but it is a little troublesome, and if you want to solve it, you can see it all.

First: In the dream, you can only buy up to 1500WMHB, that is, the **amount of CBG at a time,**, take it out from the car tube, put it into the special deposit of the bank, and you have no problem putting 10EMHB.

Second: repeat the first step, after buying and withdrawing the money from the car management, then deposit it into the special deposit of the bank, then go to the cbg second mhb, and then put it into the special deposit.

Third: This is the disgusting place of special deposits, individuals can withdraw about 100 million yuan a day, but after taking out a total of 10e of special deposits in the whole server, they can't withdraw anymore, which is the most annoying for this. So you can pick it up at 24 o'clock in the evening a day later, so you can take it all out.

Fourth: No matter how advanced a person is, he can only carry 2000w on his body, which is the upper limit, but when he exceeds 2000w, he can also bring it, and the highest is 99999999mhb. The problem is that if you go down or down, the money will get 80 in the reserve, so trade as soon as possible after withdrawing money from the special deposit, and of course, you can deposit back into the special deposit.

Fifth: Whatever you want to buy, ask the other party to set up a stall, and you will buy it again. But don't buy when the stall owner is busy, so as not to appear **, you just wait for him to finish, calm down, and buy it on time. No one wants to be cheated after spending so much money, so be careful

The second problem is better solved: since you can buy so much MHB, you can naturally let the seller consign the item on CBG for you to buy, and naturally let him specify your ID or someone will buy it, and then trade it on CBG.

1.I can tell you I haven't bought a large MHB

2.But I can tell you that you can buy them one by one and store them in the special warehouse of the money bank, and it is no problem to save hundreds of millions.

3.Then I bought it all and saved it, contacted the seller who sold the thing, discussed it, and then withdrew the money to buy it so as not to drop it and become a reserve.

It depends on your level, the higher the level, the more money you bring.

Both RD and QAD in Compal have responsible institutions, and both have mechanism engineers, so I don't know if you are RD or QAD. The organization is mainly responsible for the design or testing of the machine including the appearance, mechanism configuration, design materials, etc., and belongs to the computer stability category. RD is the R&D department, and QAD is the testing department.

Hehe, I know, you are doing die-cutting processing and sales, tell you, Compal you can't do it, first of all, Compal said to do notebook assembly, what you said about mylar adhesive, is provided by his suppliers, such as Suzhou Kesheng Foxconn rich and the like, so if you want to do business, you still have to find Compal institutions. Even if you find Compal's organization, it's useless to find their section chief, mainlanders have no real power in Taiwanese companies, and Compal is even more.

Unless, you have an iron relationship with the agency in Taipei, let him help you recommend the manufacturer to him.

Suggested use: 10 grams of Radix, 3 grams of Wu Yu, 9 grams of Jiao Gardenia Kernel, 9 grams of Citrus aurantium, 9 grams of Muxiang, 9 grams of Shallot Bai, 9 grams of Xiangfu, 9 grams of fried Shenqu, 5 grams of boiled licorice Usage: Decoction with water, 1 dose per day, 2 times a day.

Or eat stewed pork belly with lion's mane mushrooms

Method: 1 pork belly, 100 grams of lion's mane mushrooms, 30 grams of lotus meat, 10 red dates. First, cook the washed pork belly in a pressure cooker for 10 minutes, then wash the foam with water and cut it into strips.

At the same time, soak the lion's mane mushroom with warm water, peel and heart of lotus seeds, remove the core of red dates, put the four things into a clay pot, add an appropriate amount of rice wine, soy sauce and sugar, add water after boiling, and then simmer until the pork belly is crispy, and eat with a meal.

The dish is mellow, soft and glutinous, delicious and nutritious, the pork belly in the recipe can strengthen the spleen and stomach, and the lion's mane mushroom is a kind of medicinal and edible fungus, which can nourish qi and nourish blood, benefit the five organs, help digestion, and have anti-ulcer and anti-inflammatory effects, which can cure chronic gastritis. In addition, red dates and lotus seeds that help digestion are a good dietary treatment for stomach diseases. I now eat it every ten days and a half months, so that my stomach is replenished, and there are very few stomach problems**.