Why is it that the broadband is not connected, and the Internet fee is paid, but what is the reason

There are many reasons for error 678, as long as there is an error in one link below DSLAM, error 678 may occur, such as: DSLAM equipment problems, computer room user board problems, below the handover box, backbone cable problems, wiring cable problems, user home line problems, user modem problems, user computer network card problems, user computer system problems, etc., may lead to error 678. It is not easy to judge the specific cause of this failure, and it should be called to telecom to ask for a solution.

It should be faulty, if it is in arrears, the error ** should be 691 instead of 678, call the operator's customer service to deal with it.

Hello landlord、

You should go to the local business hall to go carefully, or call the ** of the network room, the computer has just paid the network fee, and the network room needs to automatically confirm that sometimes there are special reasons to manually click to confirm

You should go to the business hall or call ** to their staff

After the broadband bill - after about 10 minutes, your router, or cat starts again... Basically, you can connect to the Internet...

As long as there is no problem with the line...

Hello dear, don't be nervous when you can't connect to wifi, get it step by step!

Nowadays, mobile phones, tablets and other electronic products support the WiFi function, but they often cannot be connected to the WiFi

1.Router issues.

The easiest solution is to plug the router power connector and let the router restart, which can solve the problem by 70%.

Because the router is turned on 24 hours a day, it is time to take a good rest.

2.Multiple devices are connected at the same time.

Nowadays, many electronic products in the home or work are connected to the router at the same time, exceeding the router connection limit (there are up to 5 units), which causes even if the router is connected, there is an IP conflict and cannot access the Internet, or it is impossible to connect to WiFi. Or all wifi out of a xx

4.The wireless network card is faulty.

Some mobile phone wireless network cards have been eliminated or seriously aged, which will cause poor wifi signal reception. There will also be cases where you can't connect to the wifi.

5.First of all, I want to determine the wifi**, I am a home wireless router with one type and two laptops.

Open Start-Connect-Wi-Fi on your laptop, click "Support" in the Wi-Fi status interface to find your IP address, etc.

6.Settings-Wireless and Network-WiFi Settings-Left Button of the Next Three Pieces (I don't know what to name)-Advanced can see the IP settings, just refer to the input of the notebook according to the prompts, note: The last set of numbers of the IP address cannot be the same as that of the desktop and the notebook.

In this way, the problem is solved.

Due to arrears, the service is already in a shutdown state, and there is a time process for activation after renewal.

As long as the router is turned on, there is a wireless signal, and the wireless equipment you used can be connected, but your broadband has not been turned on, so there is no communication between the router and the Internet.

For this question, you can consult the corresponding broadband operator and when to activate it.

China Telecom customer service: 10000

China Unicom customer service: 10010

The computer can't get on the Internet, check and solve the problem:

1. Check whether the indicator light of the router is normal. Check that the power cord is plugged in.

2. The computer shows that it is connected, but there is no network. The first thing to consider is that the router has been restored to factory settings, as long as it is set up again. Enter the IP address of the router in the browser, enter the username and password, and you can set it up.

4. There is also a virus in the computer, so use the computer manager to scan the computer. Detect and kill viruses.

The route needs to be restarted and powered on again after a power outage.

The network cable is plugged directly into the computer without going through the router. 2.Turn on the broadband connection on your computer and enter your account number + password.

3.Click Connect. If you can connect, your router is not set up.

If you can't connect, look at his error code (that is, error, etc.), you can be sure that ** is wrong. Generally speaking, we can't solve it, call the operator.

691 You made a mistake. There are others:

The simplest solution, **consult the broadband handler and let it come to solve the problem.

If you want to debug it yourself, first.

1. There are generally a few days of registration time for the first application before it can be fully used.

Clause. Second, in the event of an accidental accident, please pay attention to check the indicator light of the route, which is indispensable, and the indicator light can tell you which end is faulty.

Clause. 3. Check whether the NIC interface and indicator light are normal.

The above three points are enough to solve the problem, thank you!

Hello, please take a look at what prompts are not connected, the error ** is different, the cause of the failure, and the way to deal with it are different. China Unicom Broadband can call 10010 for repair.

Where do you go to pay the fee? China Telecom?

Have you set up your router、、?Enter this address and there will be a guide to teach you how to do it.

Call the telecom's ** (10000) consultation, you may have paid the fee and have not opened the service for you.

Delete the dial and re-establish the dial.

See if you can hang QQ, and some networks can be on QQ but can't.