Find an easy to use M4A audio conversion software

Sometimes we have a good song from the Internet, and the mobile phone shows "format not supported", we all know that the mobile phone supports the *** format, today let's talk about how to convert the M4A format to *** format. It is recommended to use an audio converter to achieve the format conversion, and here are the detailed steps.

2. Double-click the desktop icon to enter the audio converter, click "Add Files", select the files you want to add, and click "Open".

3. Select the output format, click "Audio", select the "***" format, and determine a resolution.

4. Set the storage location of the file, in the pop-up window, select "Desktop", and click "Select Folder".

5. Click "Convert", and check whether the file status is *** after the conversion is completed, and the *** format conversion is successful.

The above is the way to convert the song M4A format to *** format, if you still don't understand anything, you can ask, you can also convert other formats with this converter!

M4A is a recording file format on Apple mobile phones, with the widespread popularity of Apple mobile phones, M4A audio files are used more and more, some friends will m4a audio files to the computer**, will cause m4a files to not open due to compatibility problems**. So, how do you convert M4A to ***? It's actually quite simple.

Step 1: After turning on the computer, and then install the Hi Format Converter software tool, because it is to convert the M4A format to the user, so we choose the "Audio Conversion" function, the software supports the conversion of multiple audio formats to each other;

Step 2: Click the "Add Files" button to import all the M4A audio files you need to convert to the software, and the batch conversion efficiency is higher. Then set the output format, select "***";

Step 3: Click the "Convert All" button on the bottom right corner to convert the format, and you're good to go.

If you have any comments or ideas about the software, including but not limited to **, functions, services, etc., please click on the customer service in the upper right corner of the software to contact us. Hi Format team values the opinions and evaluations of every user, welcome to experience, and have the opportunity to get our membership upgrade service

Tool Raw Materials: PC version QQ**.

1. First click QQ** in the computer desktop.

2. Then tap on the three bars at the top of the screen.

3. Then click Audio Transcoding.

4. Then click Add Song.

5. Then click on an audio in M4A format and click to open.

6. Then select Convert to *** format.

7. Finally, click Start Conversion and you're done.

Features:

It is to use the characteristics of the human ear to be insensitive to high-frequency sound signals, convert the time-domain waveform signal into a frequency-domain signal, and divide it into multiple frequency bands, use different compression ratios for different frequency bands, increase the compression ratio for high-frequency (or even ignore the signal), and use a small compression ratio for low-frequency signals to ensure that the signal is not distorted.

In this way, it is equivalent to discarding the high-frequency sound that is basically inaudible to the human ear, and only retaining the low-frequency part that can be heard, so as to compress the sound with a compression ratio of 1 10 or even 1 12. Since the full name of this compression method is called MPEG Audio Player3, people refer to it as *** for short.

According to the MPEG specification, AAC (Advanced Audio Coding) in MPEG-4 will be the next generation of the *** format.

The highest parameter *** (320Kbps) sound quality is not much different from CD, FLAC and APE lossless compression formats, and its advantage is that it occupies less space after compression, which is suitable for storage and use of mobile devices.

Hello, I have seen your question and am sorting out the answer, please wait a while 1Turn on your phone and tap to open "Format Factory Converter". 2.

Hello, I have seen your question, and I am sorting out the answer, please wait a while, I hope it will help you, kiss This is the answer that Xiaodu found for you! Thank you for your next inquiry!

Questions. Format Factory Converter in**?

If you need an audio app, you can convert any file in any format to, just follow the steps below. The first step is to open the installed audio app. Step 2: Click Audio Production in the lower right corner.

Step 3: Then click the + button on the top right. Fourth, here you can find all the ** or audio files in the phone, select the FLAC audio file that needs to be converted, and click Next. Step 5 and click on the transcoding option.

Step 6: Next, select the audio format you want to convert to, select the *** format, and click OK. Step 7: Enter the automatic transcoding stage.

Xiaodu has found another way for you.

Operate on the computer:

First turn on the computer, then open it and select the disk where the ** is stored, then select the ** that needs to be changed format, then select the ** file in m4a format, and then change the extension name to *** format and you're done.

M4A is the file extension for the MPEG-4 audio standard. As mentioned in the MPEG4 standard, the normal MPEG4 file extension is MP4, and since Apple started using M4A in its iTunes and iPod to distinguish MPEG4 from audio files, the M4A extension has become popular.

At present, most of the software that supports MPEG4 audio supports M4A, but the support situation is different, and different software support situations are different according to different audio channels.

A device is actually a small computer with specific functions. In the small body of the *****, there are ***** memory (memory card), ***** display (LCD display), ***** ** processor, MCU microcontroller or ***** decoder DSP digital signal processor, etc.

The microprocessor is the "brain" of the device, which is used to accept the user's selected control and display the current song information on the LCD screen, and then send instructions to the data signal processing chip to make it accurately process the audio signal.

The digital signal processor first uses a decompression algorithm to decompress the *** file, and then uses a digital-to-analog converter to convert the digital information into waveform information, and then the amplifier amplifies the signal and sends it to the audio port, and finally we can hear the beautiful ** through the headphones connected to the audio port.

A device is actually a small computer with specific functions. In the small body of the *****, there are ***** memory (memory card), ***** display (LCD display), ***** ** processor, MCU microcontroller or ***** decoder DSP digital signal processor, etc.

The microprocessor is the "brain" of the device, which is used to accept the user's selected control and display the current song information on the LCD screen, and then send instructions to the data signal processing chip to make it accurately process the audio signal.

Use the ***** digital signal processor to decompress the *** file with a decompression algorithm, and then use a digital-to-analog converter to convert the digital information into waveform information, and then the amplifier will amplify the signal and send it to the audio port, and finally we can hear the beautiful ** through the headphones connected to the audio port.

Start by turning on your computer, and then turn it on and select the disk where you want to store it. Then select the one you need to change the format. Then select the ** file in M4A format. Then change the extension name to *** format and you're done.

display (LCD display), ***** processor [MCU (microcontroller) or ***** decoder DSP (Digital Signal Processor), etc.

The microprocessor is the "brain" of the device, which is used to accept the control selected by the user, and displays the current song information on the LCD screen, and then sends instructions to the data signal processing chip.

Make it process audio signals accurately. The digital signal processor first uses the decompression algorithm to decompress the *** file, and then uses the digital-to-analog converter to convert the digital information into waveform information, and then the amplifier amplifies the signal and sends it to the audio port.

Finally, we can hear the beautiful ** through the headphones connected to the audio port.

M4A is the file extension for the MPEG-4 audio standard. As mentioned in the MPEG4 standard, the normal MPEG4 file extension is:".mp4"。

Ever since Apple started using it in its iTunes as well as iPod".m4a"To distinguish MPEG4 ** and audio files since".m4a"This extension has become popular.

Currently, almost all software that supports MPEG4 audio is supported".m4a", but support varies, and depending on the audio channel, the software support varies.

The steps of the M4A to *** method are detailed in detail.

Step 1: After installing the "Yousu Audio Processor" on your computer, open it, and click the [Format Conversion] function on the left; Then click the [Add Files] blue button to add the M4A audio that needs to be converted to the software, and the software supports batch conversion.

Step 2: Set the converted format first, and select "***" in the format drop-down box (of course, you can also choose other formats); Then set the output directory folder above the software to save the converted *** files.

Step 3, when everything is ready, you can click the [Start Conversion] red button in the upper right corner to start the software, and the software will automatically open the output folder after completing the conversion, so that we can view the converted audio files at any time.

Step 4, as we can see from the above case results, we have successfully converted multiple M4A audios to *** format.

Method 1: <>

M4A format ** to *** format Fig-1

3. Open the song format conversion interface, we first click "Add Files" to add the M4A files on the computer to be converted;

M4A format ** Figure 2

4. Then set the output to *** format, and set the output folder, click Format Conversion;

Convert to Figure-3

5. After the song conversion is completed, we click "Open Directory" to open the converted folder to view the files.

Figure 4-4 in M4A format

Method 2: <>

Format Diagram - 5

Method 3: 1. It is also possible to use the format conversion tool, after we add the M4A format audio, set the output format to *** format, and finally click on the format conversion.

Convert to Tu-6

M4A is the exclusive audio format of Apple mobile phones, and for the occupation of disk space, the file size of M4A is much larger than that of the *** format. If you want to convert M4A files to *** format, how should you convert them?

Audio format conversion is already a very common problem, usually in the audio can always encounter the wrong format, then you need to convert the audio format. Of course, there are also skills in audio format conversion, the following is a detailed conversion method, more suitable for computer novices, it can quickly help us achieve conversion, and support batch conversion, come and take a look!

Operation method: The first step is to double-click to open the software, and click here to select the "Format Conversion" function;

Step 2: Next, click Add File to upload the audio you want to convert here in batches.

<> the fourth step, in the lower right corner, you can set the export location of the file according to your needs;

Step 5 and finally, click "Start Conversion" in the upper right corner.

Step 6: After the conversion is successful, you will get the following prompt, click to go to the export folder to find the file preview;

Step 7: Open the file properties, and the audio file has been successfully converted to *** format!

Step 1, first of all, you need to install the software tool "Yousu Audio Processor"** on the computer, open the computer on the function page of the software, you can carefully observe, carefully understand the various functions of the software, and then select the first [format conversion] function. Click to go to the inner page.

Step 2: Click the [Add File] button to upload the M4A file you want to convert, or you can directly drag it to the specified location of the software with the mouse, and then wait for the software to convert it in batches.

Step 3: Then you need to select the format you want to convert in the format drop-down box on the right side of the software.

Step 4, finally click the [Start Conversion] button, so that the software will start to convert the audio format, when the conversion is completed, the output folder will automatically pop up, and the user can see the converted *** file here.