Which car is this rear view mirror for?

Automobile rearview mirror is the main equipment to ensure safe driving, but at present, the rearview mirror installed on various cars, whether it is a plane mirror or a spherical convex mirror, has blind spots to varying degrees. In order to make the field of vision wider and see more clearly, many car owners have started the idea of modifying the rearview mirror. However, in the opinion of some experienced car enthusiasts, the modification of the rearview mirror should be done in moderation No blind spot rearview mirror has gradually become the new favorite of car owners The rearview mirror on the car is used by every driver when driving.

It can be said that you can't drive a car without a rearview mirror. Usually the rearview mirror installed by the car is a plane mirror, the observation object is not deformed, in line with people's visual habits, but the size of the plane rearview mirror is generally small, and the width of the field of vision is insufficient, the driver in turning, changing lanes, overtaking or being overtaken, often have to lean forward or turn his head left and right to find the obstacles, there are hidden dangers that affect driving safety. Although there are many new cars are equipped with double curvature rearview mirrors, this is just to increase the viewing angle range of the left and right rearview mirrors, and still cannot fully cover all areas, so some "no blind spots" rearview mirror products on the market came into being, and many car owners are also eager to add no blind spot rearview mirrors to the car.

The model of the rearside mirror, you need to look at the specific **, there are**is the best.

The rearview mirrors are located on the left and right sides of the car's head, reaching the front of the car's interior. The rearview mirror reflects the situation behind, sideways and below the car, allowing the driver to see these positions indirectly, and it acts as a "second eye" to expand the driver's field of vision.

The sight mirror is divided by the installation position, and is divided into an exterior rearview mirror, a lower rearview mirror and an inner rearview mirror. In terms of use, the exterior mirrors reflect the rear side of the car, the lower mirrors reflect the front and bottom of the car, and the inner mirrors reflect the rear and interior of the car. Depending on the use, the mirror structure will be different.

There are two main types of mirrors in general:

One is a plane mirror, as the name suggests, the mirror surface is flat, in the term is "the radius of surface curvature r infinity", which is the same as the general home mirror, can get the same image as the visual size, this kind of plane mirror is often used as an inner rearview mirror.

The other is the convex mirror, the mirror is spherical, with different sizes of radius of curvature, its reflection is smaller than the eye, but the field of view is large, like the role of the camera "wide-angle lens", this convex mirror is often used as an exterior mirror and a lower rearview mirror. Cars and other light passenger cars are generally equipped with exterior and interior mirrors, while large commercial vehicles (buses and trucks) are generally equipped with exterior mirrors, lower mirrors and interior mirrors.

Regarding the landlord's concern about "what is the mirror of the car?" "Here's my personal opinion:

The car reversing mirror is a flat mirror:

1. There are two main kinds of rear mirrors of automobiles, one is a flat mirror, as the name suggests, the mirror is flat, which is the same as the general family mirror, and the image can be obtained with the same size as the eye, and this plane mirror is often used as an inner rearview mirror;

2. The other is the convex mirror, the mirror is spherical, with different sizes of radius of curvature, its image is smaller than the eye, but the field of view is large, like the role of the camera "wide-angle lens", this convex mirror is often used as the outer rearview mirror and the lower rearview mirror;

3. Cars and other light passenger cars are generally equipped with exterior rearview mirrors and interior rearview mirrors, and large commercial vehicles (buses and trucks) are generally equipped with exterior rearview mirrors, lower rearview mirrors and interior rearview mirrors.

The main difference between a rearview mirror and a rearview mirror is the adjustment angle.

The car rearview mirror is mainly composed of the left rearview mirror, the right rearview mirror and the ** rearview mirror. Here, the left and right rearview mirrors can also be referred to as reversing mirrors.

From the perspective of the setting function of the reflector, the purpose is to minimize the blind spot of the field of vision and improve the safety factor of driving.

Here's how to adjust each mirror:

1.Adjustment of the left rearview mirror:

In general, it is important to pay attention to the up and down and front and back directions, which have their own standards.

Adjustment requirements for up and down directions: The horizon line is in the middle of the rearview mirror screen, and the sky and ground are half of each other.

Left and right direction adjustment requirements: The body should occupy a quarter of the rearview mirror image.

2.Adjustment of the right rear view noisy coarse mirror:

Pay attention to the adjustment of the up and down directions: the sky occupies 1 4, and the ground occupies 3 4.

The left-right orientation adjustment is similar to the left rearview mirror.

The difference between the adjustment and the left rearview mirror is the adjustment in the up and down direction, because the right rearview mirror is far away from the driver, and the space occupied by the white sky is correspondingly reduced.

3.**Tease or rearview mirror adjustments:

Its main function is to observe the situation behind the car. It can be adjusted according to your height and driving habits.

Millions of car purchase subsidies.

I want to believe that many friends who have completed the driver's license basically know that the two car parts we have to look at when reversing are our rearview mirror and rearview mirror, but they are not only used for reversing, their differences and usage are still very different. The rearview mirror is the mirror on the driver's license door, and the rearview mirror is the mirror on the front windshield, which is called the rearview mirror. Let's understand the difference between a rearview mirror and a rearview mirror with a steam key land car machine.

Introduction to the difference between a rearview mirror and a rearview mirror: the difference.

The rearview mirror is one of the most important safety parts of the motor vehicle body, which is used to observe the road conditions behind the vehicle during reversing and the overall condition of the vehicle during driving. At present, most of the reflective films of domestic car rearview mirrors are made of silver and aluminum, and some are made of chromium. Now abroad, chrome mirrors have replaced silver mirrors and aluminum mirrors.

The rearview mirror is a tool for the driver to directly obtain external information such as the rear, side, and bottom of the car while sitting in the cab seat. Make it easy for the driver to operate, avoid safe driving accidents, and ensure personal safety. All countries require that cars must be equipped with rearview mirrors, and all rearview mirrors must basically be able to adjust the direction.

How to adjust the rearview mirror - up and down the rearview mirror.

When dealing with the upper and lower positions, place the distant horizon in the middle, and adjust the left and right positions to 1 4 of the rearview mirror area occupied by the body.

The adjustment of the left mirror requires a collar: place the horizontal line on the center line of the mirror, and then adjust the edge of the body, occupying the mirror 1 4.

The seat is on the left side, so it is not so easy for the driver to grasp the right side of the car. In addition, because it is sometimes necessary to park on the side of the road, when adjusting the upper and lower positions, the ground area of the right rearview mirror should be larger, accounting for about 2 3 of the rearview mirror. As for the upper and lower positions, it can be adjusted to the body 1 4 mirror area.

The adjustment of the right mirror requires a collar: put the horizontal line in the 2 3 position of the mirror, and then adjust the 1 4 of the mirror image occupied by the edge of the body. Sidley.

How to adjust the mirror - eliminate dead spots?

It is necessary to eliminate blind spots and basically adjust the left and right mirrors outwards or downwards as much as possible. In addition, some studies have shown that perhaps in order to maintain a neat appearance at all times, or for the sake of beauty, there are also many drivers who adjust the ** rearview mirror so that they can basically shine into it, which is basically the wrong approach. According to representatives of relevant professionals, it is necessary to obtain the maximum effective rear view.

A normal driver can see a left and right range of about 200 degrees ahead without looking back, in other words, about 160 degrees is invisible. The remaining 160 degrees need to be covered by three small mirrors, and it is really too &ldquo to be in the mirror of yourself to shout strongly.; In fact, the left and right mirrors, together with the ** mirrors, only provide an additional range of about 60 degrees.

How should the remaining 100 degrees be solved? It's simple, look back more!

How to adjust the rearview mirror is a very serious question. Although the new method can eliminate the blind spot of the conventional adjustment method to a certain extent, because the body cannot be seen from the rearview mirror, as many netizens say, it will be very uncomfortable.

Millions of car purchase subsidies.

Generally, the car has 3 rearview mirrors, and the owner drives them almost no less than 100 times a day, but there are some related problems that are often ignored by people, such as how to adjust the rearview mirror to achieve the best degree, how to deal with the blind spot problem of the rearview mirror and the influence of the reflectivity of the rearview mirror on various light conditions. With the help of car rearview mirrors, the driver can expand the field of vision, indirectly see the rear, side and bottom of the car, it can be said that the car rearview mirror plays a vital role for the driver, so what should car owners pay attention to about the problem of rearview mirrors?

1) There are certain rules for the adjustment of the rearview mirror, which cannot be based on feeling.

Everyone has different habits when driving, and Qizhi generally adjusts the rearview mirror based on feeling. In fact, there are still certain rules for adjusting the rearview mirror. The following issues need to be paid attention to in the adjustment:

To adjust the 3 mirrors, you must first adjust the sitting posture and then adjust the mirror.

For the interior mirror, adjust the left and right positions to the left edge of the mirror to cut to the right ear of the image in the mirror. This means that in normal driving situations, you can't see yourself from the rearview mirror in the car, and the upper and lower positions are to put the distant horizon in the mirror**.

For the left side mirror, the upper and lower positions are to set the distant horizon line in **, and the left and right positions are adjusted to 1 4 of the mirror range occupied by the body.

For the right side of the rearview mirror, because the driver's seat is located on the left side, so the driver's grasp of the right side of the body is not so easy, coupled with the need for sometimes roadside parking, for the right side of the rearview mirror in the adjustment of the upper and lower position of the ground area to be larger, accounting for about 2 3 of the mirror. The left and right positions are also adjusted to the body to occupy 1 4 sides of the stupid side of the destruction of the volume.

Car reversing mirrors, also known as rearview mirrors, are composed of two mirrors.

Car mirrors are located on the left and right sides of the car's head, as well as in front of the car's interior. The rearview mirror reflects the situation behind the car, on the side and below, so that the driver can indirectly see the situation of these positions"The second eye"to expand the driver's field of vision.

All three mirrors can be used as reflectors, rearview mirrors, and reversing mirrors, but the middle one has a 1:1 distance feeling. The distance between the two pieces on either side appears to be farther than it actually is.

If it is used for reversing, in fact, all three mirrors have to be seen, but the judgment distance is the middle one.

As for what it's called, whatever.