-
Anonymous users2024-02-10Choose cabinets from the following points.
1. Is the cabinet material environmentally friendly? It is recommended to choose plates, dew rivers, Daya and other brands.
2. Is the hardware durable? It is recommended to use blum Hettich, etc.
3. Is the table top corrosion-resistant? Quartz 304 stainless steel countertops are recommended.
4. Is the door panel clean? It is recommended to choose a high-gloss adsorption molded board with a glossy double veneer.
5. Is the design reasonable? A good cabinet design will design a reasonable plan for you according to your living habits and kitchen structure.
6. Is the after-sales service in place? Regular stores have a complete set of cabinet after-sales service specifications.
According to your own economic strength, refer to the above points, I believe you will buy a cabinet that you are satisfied with!
1.Looking at the cutting board, the cutting board is also called the cutting of the board, which is the first process of cabinet production. 2) Look at the edge banding of the board, and you may wish to touch the edge of the cabinet with your hands when buying a cabinet. The edge sealing of high-quality cabinets is delicate, smooth, and feels good, the sealing line is straight and smooth, and the joints are fine.
2.Looking at the punching, the current panel furniture is assembled by three-in-one connectors, which requires a lot of positioning connection holes to be punched on the board. The fit and accuracy of the hole position will affect the structural firmness of the cabinet box.
3.Look at the door panel, the door panel is the face of the cabinet, as important as the human face.
4.Look at the assembly effect of the whole set of cabinets, and the gaps of the cabinets should be even. Any dimensional error in the production process will be manifested on the door panel, look at the horizontal and vertical width of the door panel and the uniform gap between the doors.
5.Look at the assembly effect of the whole set of cabinets, and the gaps of the cabinets should be even. Any dimensional error in the production process will be manifested on the door panel, look at the horizontal and vertical width of the door panel and the uniform gap between the doors.
6.Look at the slides of the drawers. Also pay attention to whether the drawer gaps are even.
7.Good after-sales service. When choosing cabinets, we must choose a manufacturer with good after-sales service, so that when there is a problem, it can be repaired in time.
-
Anonymous users2024-02-09Personally, I think the double veneer and UV paint should be good, and the things used in the cabinet should be solid! My home is being renovated and the cabinet is poor, I heard a friend say that the Shangpin Jinma cabinet is good, saying that their home is now doing a lot of **? I'm going to take time to visit the store on Saturdays and Sundays, I personally prefer shiny noodles, and I don't know how much it costs to get a kitchen?
Let them do the math when the time comes
-
Anonymous users2024-02-08Of course, it is best to use multi-layer solid wood panels for the cabinet. You get what you pay for! The best stone for countertops! The door panel looks personal like. I recommend the crystal steel door panel. Moisture-proof, fire-proof and insect-proof.
-
Anonymous users2024-02-07The paint is more high-grade, but it will be more expensive, and it is not easy to maintain, the container is worn, scratches, and it will be ugly if you accidentally touch a piece of paint in the process of use! Lacquered board: general wear resistance, high temperature resistance, good water resistance.
Consumers who have high requirements for color and pursue fashion can choose lacquered boards.
UV boards are UV curing paints, also known as light-initiated coatings. There is bright surface treatment, bright color, strong visual impact, wear-resistant, long service life, no discoloration, easy to clean, high cost and high requirements for mechanical equipment and process technology, which is a more ideal cabinet door panel treatment process. But the water resistance is not very good;
In fact, the best thing to use in the kitchen is the hydroamine board, which is the cheapest and more practical.
-
Anonymous users2024-02-06You said UV. The full name is UV baking paint! It is a curing film formed by ultraviolet curing on the surface. The biggest advantage is that it does not change color in the sun! But if you have a broken board, you have to repair it! There must be a color difference!
The production process of baking paint is much more complicated, and the number of times of polishing of the paint board is many steps! The colors are more vibrant, too! More pretty!
There is also a color difference between different batches of lacquered boards! Comparatively, the lacquered panel is more beautiful! It is an upgraded product of the UV board!
It can also be reflected from the **!
Because both are equally lacquered! Just as afraid of touching, afraid of bumping! I think I would choose the lacquer for these 2 kinds of boards!
-
Anonymous users2024-02-05Bake the paint! Both are afraid of scratches, and the effect of UV paint is to be close to baking paint. If you want to choose a better one, just bake the paint.
-
Anonymous users2024-02-04This depends on what style the landlord likes, the paint is good, the paint is better, if the paint quality is not good, or UV is more environmentally friendly!
-
Anonymous users2024-02-032012 popular fashion glass cabinet panel aluminum alloy frame glass cabinet door panel.
Green and environmentally friendly, acid and alkali resistance, moisture corrosion resistance, moisture absorption, small expansion, long life, easy to clean, no open corners, heavy resistance, high gloss, color pattern personalization, scratch resistance, flame retardant.
Learn more about Ningbo Zhongxin Glass.
-
Anonymous users2024-02-02Compared with the two materials, UV is superior.
The process UV is complex, and there will be a layer of ultraviolet light curing leveling protection layer on the original base layer. It can isolate the free formaldehyde volatilization of the paint surface, and is more wear-resistant and scratch-resistant. The surface of the door panel is brighter!
At present, the domestic cabinet industry is contending, and 09 years itself is not very prosperous, more unknown small businesses "life and death" time. It is recommended to choose a cabinet or believe in the power of the brand, and choose a cabinet brand with a good reputation and good after-sales. All door panel materials are practical, and they can't directly distinguish the quality of a material by looking, touching, or even smelling!
Except, of course, for some small workshops.
I hope it can help you, the so-called metal paint and piano paint on the market are actually ordinary paint, but the paint used is slightly better than the ordinary one, or a few more spray paint grinding processes! Even some small workshop cabinet manufacturers do not follow the strict paint production procedures to produce cabinet door panels, some simply spray the paint to dry naturally, and some of the so-called UV paint is just indiscriminate!
-
Anonymous users2024-02-012012 popular fashion glass cabinet panel aluminum alloy frame glass cabinet door panel green environmental protection.
Resistant to acids and alkalis. Resistant to wet rot.
Low moisture absorption and expansion.
Long lifespan. Easy to clean.
No open corners. Heavy-resistant and high-gloss.
Personalization of color patterns.
Scratch resistant. Flame retardant detailsLearn about Ningbo Zhongxin Glass.
A kitchen is indispensable in our lives, and at the same time, the kitchen is indispensable for a practical and beautiful cabinet, so what kind of kitchen cabinet material is better? How to choose? The following is to share with you what materials are good for family cabinets, as well as the precautions for the purchase of cabinet plates, I hope to help you! >>>More
Cabinets are very common in everyone's life, and the more popular kitchen decoration is the crystal steel cabinet door panel, which has gradually become everyone's first choice. Of course, the advantages and disadvantages of crystal steel cabinet door panels should be viewed dialectically. The biggest advantage of this kind of door panel is that it has a long service life, beautiful appearance, high cost performance and many types. >>>More
There are roughly the following types of flower pots, each with its own strengths. >>>More
65mn and 70 are commonly used in the market, although more expensive materials can be used. But whether the material is good or not depends on the working environment and cycle that the spring is suitable for, for example, 70 and 65mn can reach n working life in the same working environment, and other good materials such as can also be achieved, which does not affect your unit, so why not choose the cheap one and choose the expensive one is a bit redundant, so the working cycle is the premise of determining the material, whether you can achieve the torque you need depends on the spring rate, that is, the material wire diameter, spring diameter, number of turns, working stroke, Indispensable (what you call the absence of a condition). Of course, after the spring is formed, it must be heat treated to remove the stress, which is for the spring that produces deformation in the work. >>>More
1. Flexible mortar.
One of the common materials for waterproofing is flexible mortar. The main material of flexible mortar is emulsion and mortar, which are blended according to a certain ratio and have a certain elasticity, and the advantage of this material is that even if the base layer is deformed and cracked, it will not affect the waterproof effect of the flexible mortar. However, it cannot be used on the top surface as a backwater. >>>More