How much is a BYD original hood?

How much is a BYD car engine cover.

The front cover of the BYD car opens as follows:

Tool: Automobile.

1. Find the engine cover switch in the cockpit, then pull up the engine compartment cover handle, and the engine compartment cover will bounce up slightly.

2. Put your hand into the front end of the engine compartment cover, touch the auxiliary hook handle of the engine compartment cover, lift the paddle up and hold, and at the same time lift the engine compartment cover upward.

3. Untie the hood safety buckle, take out the engine compartment cover support rod, and put one end of the engine support rod into the support notch to support the engine compartment cover (if the vehicle is equipped with hydraulic support, the engine compartment cover does not need to be manually supported).

How to close the front cover of a BYD car

Press firmly on the front hatch and it will close automatically when the front hatch is lowered. After closing the front hatch, check that the latch has been securely locked. If the hood can be opened without having to flip the front hatch lock, or if the front hatch lock does not move flexibly or cannot spring back into place, the front hatch lock mechanism should be cleaned and lubricated.

Before driving, make sure that the front spill hatch is closed and securely locked. Otherwise, while driving, the front hatch may suddenly open and cause an accident.

There is a switch on the left side of the main driving part, just lift it up.

On the clutch pedal, on the left side of the steering wheel, just press or pull it when you see the shape of the hood.

If it is a BYD S7, the front engine cover opens as follows:

Looking down in the lower left corner of the driver's seat, you can see that there is a handle, pull it up hard and you will hear a clattering sound, the lid has bounced up a little, and then walk to the front of the car, reach into the gap in the middle position and open the safety to lift the cover.

If it is a BYD G5 engine cover, it opens as follows:

There is a switch on the upper part of the lower left foot of the cab, which can be pulled up to open the engine cover.

The middle of the engine cover is sandwiched with thermal insulation material, and the inner plate plays a role in enhancing rigidity, and its geometry is selected by the manufacturer, which is basically in the form of a skeleton. The hood (also known as the hood) is the most striking body component and is one of the parts that car buyers often look at. The main requirements for the engine cover are heat and sound insulation, light weight and strong rigidity.

If it is a BYD F3, the hood opens as follows:

There was an opening handle under the A-pillar of the cockpit with a sign of the opening of the front hatch. The cover lock of the F3 is a secondary lock, after opening the opening handle, just pull the opening mechanism of the cover lock.

First, shift the gear lever to "P" or "N" and pull up the electronic parking brake. The front hatch located on the left side of the body under the instrument panel should be pulled up twice in a row.

Open the handle and the front hatch will open a little. Then lift the front hatch cover upward, support the front hatch cover with a support rod and then proceed to the next step.

When closing the front hatch, pull it through about 36 or so, then let go and let the front hatch fall naturally. Finally, after closing the front hatch, check that the latch has been securely locked.

After doing this, to be on the safe side, make sure that the front hatch is closed and locked securely before driving. Otherwise, while driving, the front hatch may suddenly open and cause an accident.

Answer the position in the lower left corner, I don't know too well that when the cover is pulled, the nose cover will make a sound; After that, go to the front of the car, and there is a handle in the open slit slightly to the left of the logo, and you can lift the hood by lifting it up.

The BYD Surui is more beautiful than the previous generation model in terms of appearance, with a distinctive design, smoothness and linear power delivery, and all the design elements are showing the charm of this car.

The appearance of BYD Surui looks young and fashionable, in line with the aesthetic standards of modern people, and the brand concept is perfectly interpreted.

BYD Surui quality and brand is convincing, impeccable, it feels good to drive, full of power, there is no pressure at all to overtake the start, this car can be called the king of cost performance, buy is earn.

BYD Surui design luxury, delicate workmanship, there is really nothing to be picky, the control is very comfortable and stable, the power is abundant, there is no pressure at all to overtake the start, it is very rare to buy a car with such configuration and interior decoration at the same price.

The overall texture of BYD Surui is in place, so that people can't find anything wrong, the control is accurate, where to hit, it is by no means blown, the power is powerful, whether it is a person or a family, it is enough, the cost performance of the car is not inferior to the car of the same price, very conscientious.

BYD Surui can meet people's daily needs in all aspects, it is very easy to control, the steering wheel is accurate, the power is incomparable in the same car series, the space is very sufficient, you can do whatever you want, and the seat is very comfortable.

On the clutch pedal, on the left side of the steering wheel, you can see the shape of the hood.

There's a handle next to the throttle that you can just lift up.

You're talking about what kind of car BYD is.