What is tempered plastic and what is plastic steel?

Tempered plastics: Tempered plastics are a kind of plastic alloys that start from the design of polymer molecules, combined with polymer blending and modification technology, to construct a fine microscopic phase structure, so as to achieve macroscopic performance mutations. Shanghai Kumho Sunrise Plastics, which belongs to Shanghai Sunrise New Technology Development, was successfully developed.

It can be used in applications that require high safety in the event of a high-speed impact of a material. For example, automotive interior and exterior decoration, sports equipment, sports protective gear and other products.

Tempered plastics are a class of plastics that are static or subjected to low-velocity impact forces.

It expresses the strength and rigidity of plastics, and the ductility of rubber-like when subjected to high-speed impact forces.

and energy absorption, it is not easy to cause brittle failure. Tempered plastics have the following characteristics:

1. When static or subjected to low-speed impact force, ordinary engineering plastics are reflected.

strength and rigidity; When subjected to high-speed impact force, it reflects the same ductility and toughness as rubber, so as to play the role of energy absorption and protection. However, when ordinary toughened plastics are subjected to high-speed impact forces, a large number of cracks will cause and propagate, reflecting brittle failure.

2. Even if the material is damaged due to external force, the damage reflects ductile failure, rather than brittle failure such as acute angles and fragments.

Tempered plastic adopts the patented technology of polymer heterosexual miscibility composite technology, which combines natural fibers or glass fibers with different kinds of plastics (PE, PP, PVC, etc.) and steel bars, similar to the principle of alloy steel or reinforced cement.

Plastic steel profile refers to the PVC profile used for making doors and windows, as early as the end of the fifties of the 20th century has appeared in Germany, China from 1983 to the introduction, in the late 90s of the 20th century began to be popularized.

Because the strength of the doors and windows processed by PVC profiles alone is not enough, steel is usually added to the cavity to enhance the firmness of the doors and windows, so the plastic doors and windows made of steel inside the profile are usually called plastic steel doors and windows. With the widespread use of plastic steel doors and windows, the PVC profiles used to make plastic steel doors and windows are commonly called plastic steel profiles. Plastic steel is also a common material for guardrails.

Key features:

Plastic steel profile is referred to as plastic steel, and the main chemical composition is PVC, so it is also called PVC profile. It is a new type of building material that is widely used, and is usually used as a substitute for non-ferrous metals such as copper, zinc, and aluminum due to its excellent physical properties such as rigidity, elasticity, corrosion resistance, and anti-aging properties.

It is mainly used in the application of push-pull, swing doors and windows, guardrails, pipes and ceiling materials in housing construction, and is also widely used in automobile engine protection plates through new technological processes, which are not only light in weight, but also have good toughness and excellent properties of rigidity, and are sometimes called alloy plastic steel.

The second statement comes first, there is also a name for engineering plastics, "plastic steel" as you said, is "commonly known by people".

The first kind of "plastic steel" is indeed the material of doors and windows. Door and window materials have experienced wooden doors and windows, steel doors and windows, aluminum alloy doors and windows, aluminum-plastic doors and windows, and "plastic steel" doors and windows are the most new materials. However, "plastic steel" is not so much "adding matching lining steel to the profile during processing", but rather "pressing plastic on thinner profile steel material".

A true "plastic steel" material in which steel can be seen in cross-section.

Although it is hard, it is not lined with steel materials, and it cannot be considered plastic steel - but if he wants to call it that, I can't stop him.

According to the national standards for the wind pressure resistance of plastic steel doors and windows have different requirements, the inner cavity of the frame and fan of plastic steel doors and windows needs to be equipped with reinforced steel, according to.

There are three thicknesses of reinforced steel in different heights to ensure the robustness and longevity of the product. And some manufacturers are.

In order to reduce costs, it is not installed or loaded with reinforced steel that does not meet the requirements. Customers should pay special attention when purchasing products, and the usual inspection methods are:

1.Estimating by the weight method, that is, weighing the weight of doors and windows, the weight of doors and windows equipped with reinforced steel is heavy, and vice versa. 2.Use magnets to place on doors and windows.

On the frame and fan, if the magnet is adsorbed, there is a reinforced steel in the profile, and vice versa. 3.Observe whether there are screws on the frames and sashes of doors and windows to fasten the section steel.

Thread nails, which can also prove whether they are equipped with reinforced steel.

The main component of plastic steel profile is chemical PVC, and its raw material is made of polyvinyl chloride resin as the main raw material, and then added a certain proportion of stabilizers, colorants and fillers, as well as ultraviolet absorbers and so on. It is also a new material that is more common in building materials. It is also very resilient and resistant to corrosion and aging.

Plastic steel refers to polyvinyl chloride material. Because the strength of the doors and windows processed with PVC profiles alone is not enough, steel is usually added to the cavity to enhance the firmness of the doors and windows, which is usually called plastic steel doors and windows. With the widespread use of plastic steel doors and windows, the PVC profiles used to make plastic steel doors and windows are commonly called plastic steel profiles.

Plastic steel refers to polyvinyl chloride material. Because the strength of the doors and windows processed with PVC profiles alone is not enough, steel is usually added to the cavity to enhance the firmness of the doors and windows, which is usually called plastic steel doors and windows. With the widespread use of plastic steel doors and windows, the PVC profiles used to make plastic steel doors and windows are commonly called plastic steel profiles.

The full name of plastic steel is plastic steel profile, and the main chemical component is PVC, which is also called PVC profile because of laughter. It is made of polyvinyl chloride (PVC) resin as the main raw material, plus a certain proportion of stabilizers, colorants, fillers, ultraviolet absorbers, etc., and is extruded. It is a new type of building material that is widely used, and is usually used as a substitute for non-ferrous metals such as copper, zinc, and aluminum due to its physical properties such as rigidity, elasticity, corrosion resistance, and excellent anti-aging performance.

Tempered plastics are a kind of plastic alloys that start from the design of polymer molecules, combined with polymer blending and modification technology, to construct a fine microscopic phase structure, so as to achieve a sudden change in macroscopic performance.

Tempered plastic was successfully developed by Shanghai Jinzhuohu Rili Plastics, which belongs to Shanghai Rizhisheng New Technology Development. It can be used in applications that require high safety in the event of a high-speed impact of a material. For example, automotive interior and exterior decoration, sports equipment, Xiangshen sports protective gear and other products.

Tempered plastics show the strength and rigidity of plastics when they are static or subjected to low-speed impact forces, and exhibit the ductility and energy absorption characteristics of rubber-like when subjected to high-speed impact forces, and are not prone to brittle failure.

The differences between the two are as follows:

1. Tempered plastic is a kind of plastic alloy that starts from the design of polymer molecules, combined with polymer blending and modification technology, to construct a fine microscopic phase surface band structure, so as to achieve a mutation in macroscopic performance; Plastics are polymer compounds made by polymerization of monomers as raw materials through polyaddition or polycondensation reactions.

2. When the tempered plastic is static or subjected to low-speed impact force, it reflects the strength and rigidity of ordinary engineering plastics, and when it is subjected to high-speed impact force, it reflects the same ductility and toughness as rubber, so as to play the role of energy absorption and protection; However, when ordinary plastics are subjected to high-speed impact force, a large number of cracks will cause and propagate, reflecting brittle failure.

Summary. Hello, glad to answer for you. Steel is not plastic.

Steel refers to a product or component made of steel, whereas steel is a metal material used to make steel products. Plastics refer to a class of materials made of polymer compounds, which can be plastically deformed after heating. Steel and plastic are very different in terms of material composition, physical properties, chemical properties, etc.

I hope mine will be helpful to you.

Hello, glad to answer for you. Steel is not a plastic bar or grip. Steel refers to products or structures made of steel, and steel is a metal material used to make steel products.

Plastics refer to a class of materials made of polymer compounds, which can be plastically deformed after heating. Steel and plastic are very different in terms of material composition, physical properties, chemical properties, etc. I hope mine will be helpful to you.

I'm still a little confused, can you be more detailed?

Absolutely, I'm glad to continue to answer for you. Let me explain it to you in detail. Steel refers to products or components made of steel.

Steel is an alloy composed of iron and carbon, and usually also contains other elements such as manganese, silicon, phosphorus, etc. The main characteristics of steel are high hardness, high strength, corrosion resistance, wear resistance, etc. Steel products are often used to make large equipment or structures such as machinery, construction, transportation, etc.

Plastics are a class of materials made from polymer compounds. Polymer compounds are usually macromolecules composed of repeating units, such as polyethylene, polypropylene, polyvinyl chloride, etc. The main characteristics of plastics are lightweight, flexible, corrosion resistance, insulation, etc.

Plastic products are commonly used in the manufacture of daily necessities, electronics, packaging materials, etc. Steel and plastic are very different in terms of material composition, physical properties, chemical properties, etc. Steel products are generally stronger and more durable than plastic products, but they weigh more than Heng Hongzhao.