How to get rid of wood eating bugs thoroughly

You can buy some medicine like "Trichlorfon" and put it there, and the worms will not dare to come.

Trichlorfon kills a lot. Not specific. Remember that there is a special wood-killing insect ...I'm going to go to Kiba and ask them all use that.

If you really can't do it, it's better to call an expert to kill insects (termites)! You can't kill it yourself! Please 114 for inquiries.

1. High temperature method: When dealing with the degreasing of building materials, residents generally use the steam high temperature degreasing method, which can not only degrease the building materials, but also effectively kill the adults and eggs of silverfish, which plays a role of killing two birds with one stone.

2. Chemopreventive method: for the joists used for laying the floor, before laying the floor, spray or brush with fenethrin emulsion, and stack the building materials used for furniture and wainscoting lining files in a unified and centralized manner, and spray them with special sanitary insecticides. Through the prevention of the above methods, the spread of silverfish can be basically controlled.

3. Fumigation method, soak the cotton in a special fumigation insecticide, use tweezers to put the cotton ball into the top of the silverfish damage hole, and then cover it with plastic film or household plastic wrap, and then seal it with tape around it, and use the fumigation, contact killing, and stomach toxicity of the insecticide to kill it. After fumigation, doors and windows must be opened in time for ventilation and ventilation.

In addition to prevention, if residents find silverfish eaten at home, they must take effective methods of extermination, mainly including: special insecticides, with a syringe directly injected into the harmful part (this method is suitable for the treatment of beetles), which can play a good role in killing silverfish and stomach poisoning. If the density of the hole in the hazard area is high, the painting method can be used directly, but you must ask a professional to guide the treatment.

Bugs in wood can be killed with dichlorvos mixed with water, the specific ratio is 1:5After mixing, the solution is loaded into a sprayer, and then sprayed comprehensively, so that the liquid will seep into the furniture, and it must be sprayed three or five times in a row to kill the moths inside. In addition, if you are using wood to make furniture, it is best to keep it for paint after purchase, which not only increases the aesthetics, but also prevents insects.

Solid wood furniture should be placed on the object should be padded with a layer of soft film, the vertical direction of the gentle handling, so as not to damage the surface of solid wood furniture, if there are scratches on the surface, should be repaired by professionals in time.

Care matters. 1. Solid wood furniture: often use a soft cloth along the texture of the wood surface to dust the furniture, before dusting, you should dip some water on the soft cloth, do not feel the moisture, do not use chemicals, so as not to damage the paint surface. Wooden furniture is a natural material that is more vulnerable to damage, so it should be used to avoid collision and impact, and to avoid dragging or grinding the surface of the wood products when placing documents or any items, as well as placing heavy objects for a long time to avoid abrasion marks or indentations.

2. When solid wood furniture is used in a drier environment, artificial humidification measures are required. For example, wipe furniture with a soft cloth dipped in water or use a humidifier in the room regularly.

3. Wax regularly, every 6-12 months, use paste wax to apply a layer of wax to the furniture. Before waxing, the old wax should be wiped off with mild, non-alkaline soapy water.

4. For cabinets with higher cabinets such as wardrobes and bookcases, do not put heavy objects on the top of the cabinet, so as to avoid the cabinet body being deformed or tilted due to excessive stress, resulting in cracks at the joints of the cabinet or poor door closing.

5. The dining table should be cushioned under the hot plate as much as possible to prevent the food soup from spilling and the temperature from rising sharply, staining or damaging the tabletop.

6. Do not expose it to strong sunlight, nor can it be placed in an excessively dry place to prevent the wood from cracking and deforming.

7. Try to avoid exposing the furniture surface to corrosive liquids, alcohol, nail polish, etc.

8. Pay attention to keep the room dry to avoid dampness and mildew of furniture.

There are several main ways to deal with insects in wood

1. Paint treatment method, for some places where there are no insects that have not yet grown, use tung oil, shellac paint or varnish and other coatings to brush to the surface of the wood, which can isolate the moth from the air and prevent moths.

2. Pharmacy treatment method, when the wood is eaten by insects, you can use dichlorvos and water in the ratio of 1 5 to prepare the liquid medicine, spray it comprehensively with a sprayer, let the liquid infiltrate into the wood, and spray 3 to 5 times in a row, and after a few hours, you can kill all the moths.

3. Use diesel oil to wipe the method, in sunny weather, put the wood that has been eaten by insects in a sunny place, and paint all the wood with a brush or cotton yarn dipped in diesel fuel for 1 time. Dry for two or three hours and apply it once again, and then dry it again, until you see the moth dead at the mouth of the hole.

Disadvantages of branch borers.

Branchworms are the larvae of various drill wood beetles, and they often destroy intact bamboo and wood tissues into fine powder. Common species of branch borers include mealy beetle, powdery tea columnworm, long-term silverfish, and long-term beetle. Among them, the longhorn beetle is an important pest of timber and timber buildings, and is the most devastating pest of dry cork, especially active in summer.

Coleoptera beetles, about 700 species, live in dry timber or under tree bark; The body length is 3 20 mm(in), although the palm beetle native to western North America can reach up to 50 cm in length. The beetle, or vine beetle) burrows into the branches or vines of living fruit trees, but reproduces in dead wood.

Methods to kill insects in wood include paint treatment, chemical treatment, diesel rubbing, etc.

1. Paint treatment method: This method is mainly used to prevent moths, in short, it is to use tung oil, shellac paint or varnish and other coatings to coat the surface of the furniture where insects have not yet grown, so that the insects can be effectively isolated from the outside air, and it also achieves the purpose of moth.

2. Potion treatment: This method is very simple, that is, when you find that the furniture is moth-eaten, buy some dichlorvos, and then mix it with water in a ratio of 1 to 5. Then use the upper sprayer to spray all the potion into the furniture as much as possible, and this is not done by spraying only once, you need to spray 3 to 5 times in a row, and after a few hours, you can probably kill all the moths.

3. Diesel erasing method: If you want to use this method, you have to look at the weather at that time, because this method needs to be carried out in good sunny weather. First, put the insect-eaten furniture in a sunny place, and then paint all the wood with a brush or cloth dipped in diesel.

Then the beam is exposed to the sun, and after two or three hours, it is coated with a layer of diesel, and exposed to the sun again until the moth is seen dead at the entrance of the cave.

Mealy beetle damage

The excretion holes infested by mealy beetle are relatively dense, and the damage mainly appears on the surface of floors, furniture, and wainscoting. If there is a hazard in furniture, wainscoting, etc., it can generally be concluded that it is caused by the spread of the internal lining, because the external composite building materials are less likely to produce silverfish. If the hazard appears on the long wooden floor, it is necessary to distinguish which building materials are harmful to the floor and the joist, in the general decoration, the long wooden floor is laid horizontally, the joist is laid longitudinally, and the two must be cross-used.

If the excretory hole infested by silverfish is single on the same floor, and there are similar situations on other floors, it means that the silverfish are carried on the floor, and if the excretion hole of silverfish is above the joist and is arranged in a straight line, it should be concluded that the joist caused the prepared clear cherry blossoms.

x0d x0a5, brush it with colorless varnish, which can not only increase the luminosity of the wood, but also kill insects. This is because after brushing the varnish, the wood is cut off from the air, and the borers cannot survive.