Patek Philippe watch repair point can t leave?

The watch does not go. Lack of power: Some friends do not wear the watch every day, or wear it for a short time every day, which leads to the lack of power of the automatic watch and the watch does not go.

Automatic watches wind the watch by moving the arm, and if you don't exercise enough or don't wear it, the watch won't go. This principle is the case with various brands of automatic watches.

The solution: wear more, exercise more, and remember to wind it when you don't wear it.

Dead battery: The most common reason why a quartz watch won't go is when the battery is dead. This is the first consideration of quartz watch abrupt stop.

The solution: Replace the battery with a new one.

Damaged internal parts: Damaged quartz oscillator or faulty circuit board.

The solution: replace the quartz oscillator, if it doesn't work, you need to replace the circuit board.

The watch has not been maintained for a long time: too much dirt inside the watch, jamming the gears, or making the battery in poor contact will cause the quartz watch to not go.

The service center provides Patek Philippe watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, Patek Philippe watch exterior parts damage replacement, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

There are many reasons why Patek Philippe watches do not go, such as: bumps, misalignment of movement gears, magnetization of the watch, long shelf time, drying of oil sludge, etc., all of which will cause the watch not to go. But it can be broadly divided into two categories:

One is the lack of kinetic energy of the watch itself, that is, the lack of winding of the watch; The other type is that the watch itself is malfunctioning;

The first reason why Patek Philippe watches do not go: lack of kinetic energy.

If the watch suddenly does not move, it is necessary to consider whether it is caused by insufficient power. Mechanical watches rely on mainspring windings to provide power and keep time by means of gearing. Because the watch is placed for too long or the amount of arm movement is less every day, it is easy for the watch to not walk or walk accurately due to insufficient winding.

If the above phenomenon occurs, you need to increase the activity of the watch appropriately, or take off the watch and shake it horizontally for about 2 minutes before resting at night. If you want the watch to go longer, you can shake it for two more minutes.

Some watches have a manual winding function, it is recommended to manually fill the string in a clockwise direction, and it is recommended to wear it for more than 8 hours a day to ensure sufficient energy. If this is not the case, there may be a problem with the hairspring. The mainspring with a lot of exercise is tighter.

The second reason why the Patek Philippe watch does not go: the malfunction of the watch itself.

If, after inspection, it is found that it is not due to insufficient kinetic energy caused by insufficient winding of the mechanical watch, it is likely that the mechanical watch is faulty. At this time, you need to send the watch repair shop to a professional for inspection and repair. If you don't know how to repair, remember not to disassemble the mechanical watch yourself.

It is best to return to the factory every year to check whether the mechanical watch is used inappropriately or if there is water. To prevent the accumulation of factors such as sweat, rain, dirty air, etc., which will cause slow corrosion to the machine, it is important to check regularly; Then it should be thoroughly cleaned and maintained every three years.

It is also important to note that Patek Philippe mechanical watches are driven by mechanical gears and clockwork, which inevitably generate friction when rotating, so they need to be lubricated for a long time to reduce the wear rate of the parts. Otherwise, repairs are often a serious problem when there is a breakdown. At the same time, it is necessary to pay attention to anti-magnetism.

The watch should be exposed to magnetic materials as little as possible to avoid magnetization. If it is magnetized, it is necessary to demagnetize it with a watch demagnetizer. At the same time, keep your watch clean.

The waterproof performance of the watch should be tested and replaced annually to avoid wearing multiple jewelry and watches on the same wrist. It is recommended that manually wound watches be wound every day, preferably at regular intervals every morning.

Regular inspection of your watch is very important and should be thoroughly cleaned and maintained at a watch repair shop every 3 years or so.

Summary. The repair of a Patek Philippe watch is generally divided into two steps, namely inspection and repair. First of all, you need to take your watch to a designated watch repair shop in your local area and have it tested in detail by a teacher to find out what the problem is.

Once the inspection is complete, the professional technician can carry out the repair according to the problem, and in general, the Patek Philippe watch can be repaired very quickly, you only have to wait for a short time.

The repair of a Patek Philippe watch is generally divided into two steps, namely inspection and repair. First of all, you need to send your watch to a designated watch repair shop in Shiyu, and have the teacher test it in detail in order to find out what the problem is. Once the chain section has been inspected, the professional technician can carry out the repair according to the problem, and in general, the Patek Philippe watch can be repaired very quickly, you only have to wait for a short time.

I'm still a little confused, can you be more detailed?

To repair a Patek Philippe Qingli watch, you first need to go to the local designated watch repair shop, so that a professional technician can conduct a detailed inspection of the watch and find out the problem. After the inspection is completed, the teacher will repair according to the problem, if necessary, the corresponding parts will be replaced, and then verified and tested, if everything goes well, the repair work will be completed, and you can get the repaired watch back.

If your Patek Philippe watch is stopping, it is recommended that you first check it for suffocation**. If there is no power**, the battery will need to be replaced. If your watch is still under warranty, you can contact Patek Philippe's after-sales service center for repair.

If you have exceeded the warranty period, you may need to pay the relevant fees to get the repair. For specific questions, please consult your local Patek Philippe after-sales service center or call customer service**. Sun Nabo.