Can Colorful CF G6 MX be loaded with e3 1230v2CPU?

Updated on number 2024-06-04
18 answers
  1. Anonymous users2024-02-11

    Colorful CF-G6-MX This is the H61 chipset.

    Target. If the BIOS is newer, you can directly connect to E3 1230 v2

    Look at the BIOS date, it can be released after 2012, otherwise you need to go to the 2nd generation CPU and then flash the BIOS

  2. Anonymous users2024-02-10

    It is still possible for the H61 motherboard to support E3 1230 V2, but different manufacturers do not rule out that it is not supported.

    I have encountered a situation where H61 is not supported before, and you need to flash the BIOS, and then it can be used normally.

    H61 supports i7 3770 without any problem.

    You can go to the official website to check the BIOS version support to see if your motherboard's BIOS needs to be supported after flashing.

  3. Anonymous users2024-02-09

    The board of this H61 chipset supports 22nmCPU and should be able to light up E3 1230v2 directly without any problems. To bring out all the features of this CPU, you still need a C206 chipset.

  4. Anonymous users2024-02-08

    As far as the description is concerned, it can't. It is recommended to find a B75 motherboard or a B85 motherboard.

    I don't know how to continue asking, satisfied.

  5. Anonymous users2024-02-07

    Colorful CF-G6-MX is an H61 chipset, which can support E3 1230V2, but before E3 1230V2, it is best to upgrade the BIOS to the latest.

  6. Anonymous users2024-02-06

    Remove it and replace it with a try.

  7. Anonymous users2024-02-05

    Finish. I want to find a replacement board, there is.

  8. Anonymous users2024-02-04

    This motherboard supports LGA1155 CPU is better... i7-2600k

  9. Anonymous users2024-02-03

    Yes, this chipset is H61, in fact, it is the H61 motherboard of LGA1155, you can go to the second and third generations of the Core i series, and the second and third generations of the i3 are OK, and the latest i3 and the fourth generation are not compatible with your motherboard.

  10. Anonymous users2024-02-02

    If memory serves, you can install the i3-3240

  11. Anonymous users2024-02-01

    CPU Support Supports Intel LGA1155 SNB processor (3-phase power supply, supports TDP 77W processor) Supports i7 3770K

  12. Anonymous users2024-01-31

    The letters in front of the colorful motherboard CF G6-MX such as: G stands for integrated board, with graphics card chip, P X without integrated graphics, level X is better than P and better than G in terms of performance, the larger the suffix number, the higher the grade.

    AMD's board number model is in front, and the larger the number, the higher the level, and the suffix letter G is also integrated, and there is no G without the word "g", which distinguishes the quality of the motherboard, mainly depends on the brand.

    Colorful Technology Development **** is a well-known DIY hardware manufacturer in China, Colorful predecessor and information company was established in 1995, with the best sales-oriented company committed to IT channel value-added business. Colorful graphics cards have become one of the famous graphics card brands in the market.

    In the past 20 years, Colorful Group (CFG) has completed three stages of strategic transformation, and successfully transformed from a computer component manufacturer into a complete industrial chain enterprise with independent research and development, independent production, independent brand and independent sales, and then sublimated into an industrial group integrating from the real economy to the capital market, which is the epitome of the development and growth of high-tech enterprises under China's reform and opening up policy.

  13. Anonymous users2024-01-30

    The z-register is a soft component that the address register uses for address processing (indirect designation) of software components used in sequential control programs.

    1: Address processing uses the address register 1 point, specified with 16 bits of data (-32768 +32767 or 0h ffffh).

    2: All series have relay output models, FX series with MR models are relay output models, A, Q, L series can be equipped with relay output modules.

    3: The M8034 in Mitsubishi's FX series is an output relay lockout, that is, the output is gone, Siemens has no corresponding instruction, if you want to implement this instruction, you can keep using the MOV instruction to assign the output to 0 or directly execute the STOP command to force the PLC to stop.

    4: Mitsubishi Q series PLC needs to be equipped with a user memory card to use the file register R to store user data, its initial value assignment is the same as the data contactor D, and it needs to be assigned with the data transmission instruction MOV.

    5: The M register is a register and can also be used as a virtual relay, 16 or 32 consecutive M registers can also store binary data, and the D register is a register for storing data.

  14. Anonymous users2024-01-29

    What type of motherboard is the landlord talking about?

    1.You can look at the white label on the back of the motherboard, and the model number is on the label;

    2.It can be turned on, restart and press Tab + Pause Break to see it.

  15. Anonymous users2024-01-28

    。。The CPU interface of the motherboard is LGA1155, i3 2130 i5 2500 i3 3240 i5 3470 can be supported, and the maximum can be up to i7 2600 2700K.

  16. Anonymous users2024-01-27

    CPU Support Supports Intel LGA1155 SNB processor (3-phase power supply, supports TDP 77W processor).

    Support i7 3770K

  17. Anonymous users2024-01-26

    H61 motherboard is suitable for Intel processors, the configuration is matched with AMD processors, then the whole set of configuration must have major compatibility problems, in practice, you will find that the processor can not be installed to the motherboard normally, because the pins are different, so the configuration is unqualified, in addition, the H61 motherboard is an entry-level motherboard, so it is not suitable to match the high-end processor, otherwise the performance of the high-end processor cannot be played.

  18. Anonymous users2024-01-25

    This motherboard is H61, how can it support AMD's CPU?

Related questions
19 answers2024-06-04

The new double 128 mmx440 can probably only be sold for 190, your more than a hundred can be sold, and the graphics card I think 6200A is not as good as using the overclocked version of 9550, the performance is better. The 6200A is NV's swan song in AGP, but it only has a 64-bit memory bandwidth, which is still worse than the 128-bit 9550. If you don't like a card, you can also consider 6600's AGP, ** more expensive, not the native AGP, with a slight loss of performance.

26 answers2024-06-04

Of course, 6600 256MB is better than x550 Even if you don't look at the frequency 256MB is larger than 128MB, and the 6600 itself is higher than the frequency of x550 They are all classic graphics cards belonging to 05. >>>More

13 answers2024-06-04

1650 is not recommended, it's not cost-effective. You can buy 7300gt, 256m small shadow, more than 400. >>>More

14 answers2024-06-04

The new board of the full range of AM2 CPUs can support AM2+ and AM3, and if the boss has updated the BIOS, it can also support AM2+ and AM3. >>>More

27 answers2024-06-04

AMD's CPUs have Cool&Quiet technology, which is an energy-efficient technology. When the CPU load is low, it can automatically reduce the frequency to 1GHz, and return to the normal frequency when the load is high. I wonder if it's due to this reason. >>>More