The access mode is ADSL dial up, how to achieve wireless Internet access?

Installing Bluetooth is also OK, wireless routing, or wireless network card.

1. ADSL is generally provided by telecommunications and is based on a way to access the Internet based on the transmission signal on the copper. This transmission mode is divided into uplink and downlink, and the uplink and downlink rates are different, so it is called ADSL. For the full name and noun explanation of the specific ADSL, you can check it on the Internet yourself.

To put it simply, it's a way for your home to connect to the internet;

2. Ethernet, in fact, with the current wide standard, Ethernet, is the Internet. People often talk about surfing the Internet, but in fact, it means connecting to Ethernet;

3. **Dialing, in fact, this concept is the same as ADSL, except that the rate of ADSL is at least 512K or above, and this **Dialing can only be at most 56K or below. It and ADSL are both ways to connect to the Internet.

4. Wireless Internet access is a way to use your mobile phone, pad or laptop computer to connect to the wireless network, so that you can connect to the Internet.

If you have any questions about the above explanation, please feel free to ask.

It's very simple,Enter or enter the router settings in the browser,Remind me,The wireless router is turned off by default,So you just bought it back to use the network cable to set it up,Enter the router settings,Set the Internet access mode is adsl virtual dialing (PPPoE),Next,Enter the account password,Then turn on the wireless switch,That's it,Some network cards sometimes can't detect the signal,You can choose the wireless channel to 11 on the line, Both the wireless and local connections of the computer are set to automatically obtain the IP address. It can also be set to the same IP as the router, such as or, x is not 1, and the computer is the same as the computer.

First connect the router to the machine and read the manual according to the above settings, the connection method is the cat to the wireless router, and then the wireless connection is obtained.

It mainly sets the dial-up type, as well as enters the Internet access account and Internet password, taking the TP-Link wireless router as an example, 1Connect the network cable to the WAN port.

2.The other network cable is connected to the LAN port at one end and the computer at the other end.

3.Open a browser and enter the administrative address of the router, such as:

4.After logging in, you can go through the Setup Wizard to configure the basic information as required.

5.After the following settings are completed, you can surf the Internet normally.

6.Find Network Parameters --WAN Port Settings.

7.In the first item on the right, select PPPoe in the "WAN port connection type", enter the Internet access account and Internet access password, and click Save.

8.After restarting the router, the router can automatically dial in for broadband.

You connect the computer to the router, enter the IP address on the back of the router, and there are settings in it...

First, connect the LAN port of the router with a network cable, and connect the other end to the computer. Open it on your computer (this is the default), then log in to the router, default account and password (admin), and then set up your broadband account in the access network. Then set up wireless.

For most dial-up Internet users, due to the discrete nature of their Internet access time and space, it is very undesirable to assign a fixed IP address (static IP) to each user, which will cause a great waste of IP address resources. Therefore, these users usually automatically get a dynamic IP address every time they dial the ISP's host, which is of course not arbitrary, but an address in the legal interval between the network ID and the host ID applied by the ISP. The dial-up user's IP address may be different when they connect twice, but the IP address will remain the same for each connection.

Another: ADSL Virtual Dial-up Access.

ADSL virtual dialing is to dial on the digital line of ADSL, which is different from the dialing of a modem on the analog ** line, and adopts a special protocol PPP over Ethernet (PPPoE), which is directly verified by the verification server after dialing, and the user needs to enter the user name and password, and a high-speed user number is established after the verification is passed; and assign the corresponding dynamic IP. Virtual dial-up users need to verify their identity through a user account and password, this user account is the same as the 163 account, which is selected by the user when applying, and this account is restricted, and can only be used for ADSL virtual dialing, not for ordinary modem dialing. ADSL virtual dial-up broadband access mode is currently the mainstream mode provided by domestic broadband operators, the ADSL virtual dial-up access that needs to use broadband router is mainly ADSL modem without built-in routing function in the Ethernet interface, if you use this kind of equipment, please set up a broadband router in the following way.

Connect the ADSL modem to the broadband router and set the NIC to "Automatically obtain IP address".

Then, open the Internet Explorer (Internet Explorer) browser, enter the IP address of the broadband router in its address bar, and there are two common IP configuration addresses of mainstream broadband routers (please refer to the manual).

After entering the IP address of the broadband router, you will be prompted to enter the username and password of the router you are logged in to (some models of machines only prompt you to enter the password), and the default username and password of the factory are generally admin (if not, please refer to the manual).

After entering the username and password, press enter to enter the setting interface of the broadband router, take the broadband router of Jinlang as an example, click the menu "Internet Wizard" under the interface, and then, select the "ADSL Virtual Dialing" item. After selecting, click "Next", the window of entering the username and password will appear, in the window, after entering the username and password for surfing the Internet, continue to click "Next", then click "OK", if it is correct, and finally click "Back" The settings have been completed.

Virtual dial-up is simply a virtual network ADSL is converted into digital signals through the analog signal of the network.

ADSL refers to the method of connecting to the Internet using a ** line.

It's just something connected to the Internet!

Broadband connections are dialed up by modem, PPPOE, and cable modem.

In the 90s of the 20th century, when the Internet first existed, one of the most common ways for ordinary people to use the Internet was dial-up Internet. As long as the user has a personal computer, an external or built-in modem and a ** cable, and then apply for their own account with the local ISP ** provider, or buy a network card, have their own username and password, and then connect to the Internet by dialing the ISP's access number.

The way is: PPPoE.

PPPoE is an abbreviation for Point-to-Point Protocol over Ethernet, which enables an Ethernet host to be connected to a remote access concentrator through a simple bridging device. Through the PPPoE protocol, remote access devices can control and bill each access user.

It's the kind of dialing of the ** line.