Are there any tips for catching dolls?

Basically, once three or four times, you can grasp it relatively firmly, and after finding the pattern, you can catch it by firmly grasping this opportunity, provided that you need to find the pattern. It costs a bit of money.

One stop, two looks, three buttons, pull over and bulge to find a breakthrough. Don't rush to grab the doll. Move slowly to the side.

Tips for catching dolls.

Many times catching dolls is not a technical job but a matter of luck, the setting of the loose claws of the crane machine in the shopping mall should be known to many people, and catching the doll is a communication that pays attention to the probability, that is, the claws of the doll will not be loosened once after catching a few times, which should also be known to many people. Therefore, the chance of catching a doll normally is very small.

In fact, there is also a marketing strategy for catching dolls, many times we can catch dolls, but in the process of claws rising, about half of the rise, the doll will fall, many people mistakenly think it is an accident, they will catch it again, but this is the routine of the business. Make you unwilling to catch it again.

In fact, it is still very far-fetched to say that there are skills in catching dolls. Because this is too loose for this claw, it can only go off the beaten path.

First of all, many doll grabbing gods use the method of throwing claws, not moving the claws too much, relying on the inertia of the claws to catch the doll, but the thing that controls the claws is still above the hole, so the doll is not easy to fall. Of course, this method still needs to be tempered.

Then it is to look for a crane machine with many dolls, and try to choose the kind where the doll is beyond the baffle, so that if you are lucky, the chance of catching the doll will be a little greater. Just a little bit.

There is also the option to grab the doll close to the baffle, not to catch, but to use the lever to stay away, to pull the doll out, it may be difficult to understand, forget it, you can't catch it anyway. Ha ha.

Personally, I like to catch dolls very much, and when I see the crane machine, I will try to catch it, I feel like luck, but I also have some experience.

1.Choose the doll near the exit. This is a bit more likely. And the distant ones, they must have fallen when they were caught.

2.Turning the joystick quickly and shaking the paws will increase the grip and have a better chance of grabbing.

3.Don't choose round dolls, it's easy to fall off. It is also possible to choose dolls that protrude instead of piling them together.

4.You can have a claw pass through a certain part of the doll, such as: tags, ropes, doll's clothes, etc.

The tips for catching dolls are as follows:

1. Try to catch. Try to catch it first, if it's the kind of shaking that isn't too big, and the claws aren't shaking much, congratulations, there's a play.

2. Choose a good location.

Usually, the area around the hole is the area with the highest hit rate of catching dolls, followed by the outer circle. Of course, it is also necessary to observe whether the posture is correct, to see if the object to be grasped is angular, and it is best if it can be stuck in the claw.

3. Push down. If the position is average, then pushing the doll down is a very practical technique. Especially like a larger doll, it is best to grasp it from the doll's body and neck, if you clamp it from the head of the sitting doll, the clip has no grip point, and the doll can easily fall off.

The method is to drop the clamp a little bit, so that one claw is on the doll's head, and the other two paws grasp the doll's body obliquely.

4. Shake and grab. If there is no obstacle next to the target doll, throw the clip left and right, let the clip swing sharply from side to side, find a good time to press the drop button, and when the claw clamps the doll to retract, it will throw the doll to the exit.

The skills of grabbing the doll include choosing a machine with more dolls to grab, choosing a good position, trying to gently shake the machine, changing the doll, and claws on the doll's body.

1. Choose a machine with more dolls to catch.

First of all, when we catch dolls, we must not choose a machine with only a few dolls to catch, so the probability of success will drop a lot, we need to pay special attention to this, because the more dolls, the higher the probability of success.

2. Choose a good location.

When grabbing the doll, the position is actually very important, be sure to choose the kind of doll that is close to the claw, so that the probability of clamping the doll will be much higher, and you should not catch the bottom, because the bottom is likely to be blocked by other dolls.

3. Try to shake the machine gently.

When we catch the doll, we can try to gently shake the claw machine, so that the claws of the claw can also shake, so that the doll is not easy to fall off, so that it is easy to catch the doll, this skill we need to know.

4. Crane changing machine.

When we try to catch the doll on the same crane machine many times, we need to consider changing the doll machine, because catching the doll is probabilistic, and if one is not moderately caught, we should change to catch it, and we may also catch other crane machines. We need to pay attention to this.

5. The lower claws of the doll's body.

When we catch the doll, see the doll's body clearly, and then it is best to grasp it from the doll's body, so the probability of success will be much higher, we need to pay attention to this, and be sure to be scratched head or feet, it is difficult to catch.

The tips and tricks for clipping dolls are as follows:

1. Roll into the hole.

This method is to let the doll clip up and fall down, and then roll directly into the hole. This method is simple, but it is important to observe first. Generally speaking, it is easier to roll into a slope of more than 45 degrees, and it is more difficult to roll in a slope of less than 30 degrees.

The method is that when the clip falls, don't be in a vertical line with the doll, and the clip should be slightly closer to the hole, so that when the clip ** comes up, there will be a pull to the exit.

2. Throw the clip.

This method is more difficult. First of all, the target doll should not be too close to the glass or the acrylic at the exit, otherwise it will be knocked by the clip. After confirming that there are no obstacles next to the target doll, throw the clip left and right, let the clip swing sharply from side to side, find a good time to press the drop button, and when the claw clamps the doll to retract, it will throw the doll to the exit.

Note to calculate the position of the clip, after clamping the doll, the clip will not be relaxed at this time, swinging while retracting, the clip will generally let go after reaching the top, and our doll will also be thrown to the hole when it is empty. This method sounds like a good idea, and it is much safer than moving the clip slowly, but it is difficult to aim, so the success rate is not high.

3. Knock down the doll.

It is a very practical technique to push the doll, such as a larger doll, or a two-headed doll like a bear and a piggy, it is best to grasp it from the doll's body and neck, if you clamp it from the head of the doll that is sitting, the clip has no grip point, and the doll is easy to fall off. That is, the clamp falls a little bit, so that one paw is on the doll's head, and the other two paws grasp the doll's body obliquely, and the doll will be pulled down after the clip is withdrawn. Pay attention to the position and use the rotating clip.

It is worth mentioning that if there are too many obstacles around the doll, this is not applicable.

4. Selection of the clip doll area.

We can divide each crane machine into many areas. Of all the areas, the area near the cave entrance has the highest success rate. Next to the entrance of the cave, basically as long as the clip can be clamped up and lifted into the air, the success rate is very high.

So the first thing to see is whether there is a doll with a good position around the hole of this crane machine. If not, look at other areas.

5. Smooth material dolls are carefully grasped.

This trick involves the issue of the material used for the exterior of the doll. Some relatively smooth fabrics, such as silk type, Heng Shouting Blind This kind of material itself is relatively smooth, even if the clip is clamped, the tightness of the clip may be slick and bent when it is studied. So if you think this thing is unusually smooth, be careful.