Our company s photocopier is stuck with old cardboard, and it takes a long time to deal with it ever

There are two main reasons why a copier jams:

1. It is the fixing part.

2. It is the transmission column of the drum group key, of course, it will also be at the paper outlet.

The former is that the separation jaw is deformed or dirty, if the fixing temperature is high or the machine is aging, it is easy to jam here, and it needs to be maintained and cleaned. If the transmission column is stuck, it is shredded, because there is a lot of paper foam deposited on it, so it is easy to cause paper jams. The cardboard is maintained comprehensively, and the cleaning is not done!

Hello! This is sometimes a problem with the paper, the paper may be damp and cause paper jams, so it is best to put the printing paper in the bag if you don't use it, and don't put it outside at will.

It may be that your paper is damp, you can change to a new A4 paper to see, or find after-sales maintenance.

I think it's better to find someone in charge of this work to fix it as soon as possible, and if the repair is still not satisfactory. In order to ensure work efficiency, it is recommended that the leader change to a new copier. On the whole, although it costs a sum of money, the efficiency goes up, and the income will increase.

The service life is too long, of course, it is good to save a new one, and Philips's can be.

You can find a photocopier to repair it after sale.

First of all, determine the budget, and choose big brand products according to the amount of budget, as long as the function can be used. There's no need to be up-to-date, as long as the product is durable.

Copying is recommended for copying, and it is recommended to rent copies. It's also a good deal.

The steps to solve the problem are as follows:

1. Open the top cover and remove the print cartridge. To prevent damage to the printed flour packer, do not expose it to sunlight for more than a few minutes.

2. Use the green handle to extract the paper inspection port cover.

3. Slowly pull the paper out of the printer. Do not tear the paper. Avoid loose toner lifts.

Use a lint-free, dry cloth to remove loose toner that may have landed on the printer. If loose toner gets into the printer, it can cause temporary print quality issues. After a few pages are printed, the loose toner should be removed from the paper feed.

If the toner sticks to your clothes, wipe it off with a dry cloth and wash your clothes in cold water. Because hot water will allow the toner to penetrate the fibers.

4. Close the paper check port cover, reload the printing flour packer, and then close the top cover. If the paper jam message is still displayed, there is still a paper jam in the printer. Look for the jam in a different place.

Paper jams are a phenomenon that can occur or occur frequently in every photocopier, and paper jam failures do not affect the image quality of copies, but are caused by mechanical failures and control system failures. Since paper jams are common faults, and each machine has different structural layouts, processing techniques, assembly processes, quality of parts and components, and other factors, only some common problems are put forward here for reference.

1. Paper supply device.

1) Rubbing: aThe paper roller is aging and worn.

b.The paper roller pressure is insufficient.

c.The gap between the left and right sides of the carton (table) and the paper is too small, and the normal one is about 1mm.

d.The pressure on both sides of the paper roller is uneven, forming one side of the advanced and the paper is tilted.

2) Paper: aThe size of the paper does not meet the requirements of the machine.

b.The front and back widths are inconsistent, and the angles are not 90 degrees.

c.The paper is not rubbed open.

d.Paper-mounted reverse.

2. Paper feeding device.

1) Paper conveyor: The paper conveying channel is the channel for paper conveying, so there should be no paper scraps and other debris and burrs in the paper conveyor, and keeping the paper lane clean and smooth is an important factor to avoid paper jams.

2) Paper feeding roller: The feeding of paper is completed by the paper feeding roller, so the transmission of the paper feeding roller should be uniform, and the pressure on both sides of the roller should be consistent, otherwise the paper will be skewed during the transmission process, causing paper jams.

3. Separate parts.

1) Failure of the separation device (such as the separation belt falling off, insufficient suction of the nozzle for air suction separation, improper angle and position of separation, and insufficient voltage of AC charge separation, etc.).

2) The separator is not regularly cleaned, serviced and maintained.

4. Fixing part.

1) The pressure at both ends of the shadow roller is inconsistent in the hot pressing method.

2) There are residual debris (such as paper scraps) in the middle of the hot pressing roller.

3) The thermal fixing device is not cleaned well, so that the toner melts on the guide plate, hindering the passage of the paper. Return.

Hello answer, this is summarizing for you, typing also takes time, please be patient 4Paper jams caused by paper path sensor failure or other circuit failures belong to another type of problem, which should be checked accordingly with the help of instruments according to the maintenance manual.

And don't use brute force when disassembling the printer.

The office photocopier is always jammed, and if you can't invite a master, it's better to come by yourself.

1. Paper jams caused by printer failures, such as paper jams caused by common toner cartridge problems, paper jams caused by paper rollers, paper jams caused by fuser component failures, etc.!

2. Paper problems lead to paper jams, and the quality of the paper leads to paper jams in printer copies, such as the brand of paper, grams, moisture content, static electricity, whether the cutting is dusty and other factors.

Gannan Boxiang Computer provides you with first-class computer and computer peripheral services.

Most of them are caused by paper moisture or poor paper quality, and slight moisture is not visible to the naked eye, but it is easy to cause paper jams. You can buy a new pack of other brands of paper and try it out.

If the paper jam rate is very high, there is a problem with the sensor, especially Panasonic's printer.

Laser printers, each time two sheets of paper are fed, the first one almost comes out, and the second one stops as soon as it goes up, just like two sheets of paper at a time.

1.Check the inside of the printer for small pieces of paper, pins, and the like that that are jammed.

2. Check whether the pattern on the paper roller is clear, if the wear is serious, you need to replace the paper roller, which is the most common failure.

3.Failure of the paper sensor or fuser roller.

An old paper jam indicates that a part of the printer has been worn.

It is recommended to take it to a repair shop to repair it...

Paper jams in the photocopier are a very annoying thing, which not only wastes paper and consumes time, but also affects work efficiency. Here are some ways to deal with a paper jam in your copier:

1.Turn off the copier completely and open the lid to see if there is any paper jam. If so, gently pull out the jammed paper to avoid tearing it.

2.Check that the paper feed tray is placed correctly and try to avoid dispensing more than the maximum capacity. Ensure that the paper is neat, no squeezing, jujube smile buried curl and other phenomena.

3.Check whether the drum of the photocopier is clean, if the drum is too dirty or the friction is insufficient, it is easy to cause the paper to jam. Use a professional printer to clean the surface of the drum with paper or paper towels.

4.Try adjusting the feed direction of the paper. If you notice a serious paper jam on one side during use, you can try rotating the paper 180 degrees, which may make it easier to pass through the copier.

5.Update or replace the software drivers for your copier. Outdated drivers have the potential to cause various problems and glitches, while new drivers usually resolve paper jams.

6.If none of the above methods can solve the problem of paper jams in the copier, it is recommended to contact the after-sales leather lifting service personnel for inspection and repair. Many copier failures will be accompanied by certain alarm sounds or light prompts, so you should pay attention to them in time.

It's best not to try to turn on the copier yourself for repairs unless you have specific skills and experience.

To sum up, proper operation and maintenance can effectively avoid the occurrence of paper jam problems in the copier. If you encounter a paper jam problem, follow the above methods step by step, and be patient and careful, and you will eventually get a good solution.

The main reasons and solutions for frequent paper jams in the photocopier:

1.The paper banquet is bent and too damp, making it difficult for the paper to thicken and the photocopier to pass; The paper needs to be dried or replaced with a new one.

2.If the paper is not copied at the beginning, you can try cleaning or replacing the roller.

3.If the paper is stuck in the position of the drum core, please check whether the selenium delay letter drum has a worn part, if there is, it is the power dissipation is not complete, so it is easy to jam. It is recommended to replace the toner cartridge.

4.If the paper is jammed on the fixer, and the position is hot and stuck in a fan-shaped, please check whether the separation jaw is normal, if not, please try to reset or replace.

5.If it is a double-sided jam, check the double-sided flip for dirt or other things, and replace it with high-quality paper.

If the copier jams paper from time to time, it will have a great impact on the work efficiency and can be very annoying. In this case, you have a few methods to try to help you solve the problem of paper jams.

Clause. 1. Check the copy paper.

If your photocopier jams paper from time to time, you need to check the copy paper first. Sometimes the use of macros is too old, and wet or damaged copy paper can cause paper jams. Make sure the paper is dry, flat, and not too thick.

Also, make sure that the paper that matches the printer type is placed in the machine.

Clause. 2. Pay attention to the placement of paper.

When placing the paper, you need to make sure that the paper is placed in the right direction inside the paper drawer. Generally speaking, the front side should be facing down, while the left side should be aligned with the line that the alignment line thickens close to **. If you're not sure how to place your paper, you can check your copier's manual to determine the correct way to place it.

Clause. 3. Clean the copier.

If your photocopier jams paper from time to time, then there is a good chance that the inside of the device is too dirty. Therefore, cleaning up the photocopier may be the key to solving the problem. You can use a cotton swab or wet paper towel to clean the drum of the device or any other area that may be dirty.

Ensure that when cleaning, it is done in a power-off state and using appropriate cleaning tools from the manufacturer.

Clause. 4. Replace the toner cartridge.

If you find that the paper jam problem may be due to the outdated toner cartridge, you will need to replace it. You can find the box inside the copier, just open the device and remove it. Then, buy a new toner cartridge and install it according to the instructions.

Clause. 5. Contact professional and technical personnel.

If the above methods don't resolve the paper jam, then you may need to contact a professional technician. The maintenance personnel can check for other possible faults of the equipment and provide solutions. You can contact your copier provider or service provider for help and support with repairs.

Summary. If your photocopier jams paper from time to time, it will cause a lot of trouble for your work. However, with the right operation and the way to deal with paper jams, you can solve this problem and improve your work efficiency.

It should be noted that keeping the equipment clean and using the right paper correctly can reduce the occurrence of paper jams to a certain extent.