Is it necessary to install a heating exchanger, and does it need to install a heating exchanger in t

It is not necessary to install a heating exchanger. Heated rooms are generally uniformly heated and do not require the installation of switches.

If you are installing this kind of heating at home, it is actually necessary to install this kind of exchanger, which may be a little better, relatively speaking.

Do I need to install a heating exchanger? I don't think it's necessary, it's warmer without miles. It is not necessary to install a heating exchanger.

Is it necessary to install a heating exchanger? Then according to the conditions you live in, the outdoor temperature should be very cold outside, and you install a heating switch, which is very beneficial to your temperature The temperature in the house rises.

If you want to install a heater, of course, you need a switcher, so you can put the main exchanger and install it in.

Personally, I don't think there is a need to install a heating exchanger, and it takes only four months to write in winter.

The heater can also be equipped with a heating exchanger, so the utilization rate is very high.

If the indoor temperature does not reach, it is necessary to install heating. This will keep the room warm.

It depends on what kind of heating it is, and if it's a building, it's not necessary.

It depends on whether it's cold in winter or not, if it's not very cold, there is no need to install this kind of heating exchanger.

Is it necessary to install a heating exchanger? There is no need for a changer in the household's home.

The heating of the home can exchange heat normally, so there is no need to change this heating exchanger.

Is it necessary to install a heating exchanger? Is it necessary to install a heating exchanger? If it's cold, just pretend to be it.

In the north, there is still a need to install a heating exchanger, so that the water coming out of the water pipe will have hot water, and in winter there is no need for water from an electric water heater or a gas water heater.

Take their sawdust that exchanger, there must be some of that.

There is no need to install a heating exchanger. Direct heating will do.

1.Solar water heaters (downwater, glass tubes).

Advantages: If the selection is reasonable and the requirements for the use of hot water are not high (wash when the water is hot, and do not wash when the water is cold), you can save electricity.

Disadvantages: short life, low water pressure, not necessarily power-saving, great safety hazards, outdoor anti-freeze part is very power-consuming! If you don't believe it, just add a meter to it and try it!

Market share: 9-10%, has been growing in recent years, but as its shortcomings are exposed, the outlook will become worse and worse. This product is suitable for use in rural summers.

2.Electric water heater.

Advantages: mature technology, stable quality, constant water temperature.

Disadvantages: The electricity bill is a little higher, and it will be much better if the peak-to-valley electricity price is implemented in the future.

Market share: 60%. There must be reliable grounding and a quality leakage protector at home.

You can choose according to your own situation. If your house is suitable for installing solar water heaters, with sufficient sunlight, it is recommended that you buy solar water heaters, but at the same time install anti-freeze emptying devices, one is anti-freezing in winter, and the other is hot water directly.

Install a Korean heat exchanger, high efficiency, long life, quality assurance. 0633-3601969

Rizhao Korea heat exchanger general distributor - Jia'an Electric.

You can install a heat exchanger, turn off the valve for heating into the home, and you can install a heat exchanger.

Yes, close the valve of the main valve of the heating home or the radiator of the toilet group, and the drain pipe can be assembled.

In fact, you can take a look at Haier's air energy water heater, which can provide hot water 24 hours a day, which is very environmentally friendly and energy-saving.

The installation of heating exchangers in new houses is best carried out simultaneously with special repairs, and now the property is more strict in checking and stealing heat, and it is best to use mini hidden Chunye brazed plate heating heat exchanger.

If you take a bath, you can use 38 pieces of heating water temperature above 70 degrees, 50 pieces or 60 pieces of water temperature above 60 degrees, 80 pieces of water temperature above 50 degrees, and 100 pieces of water temperature of about 50 degrees.

What kind of household heat exchanger? Small plate heat exchangers are used even when the water is out, and large tank heat exchangers can store a certain amount of hot water.

1. The heat exchanger is heated with heating water, and the so-called heat exchange refers to the heat of the heating water is converted into the inflow of tap water, and the outflow is the hot water after heating.

2. Whether it is connected in series or in parallel, it is OK.

3. No matter what kind of heat exchanger, a filter must be installed at the inlet of heating water and tap water to prevent the heat exchanger from clogging.

No, because the domestic water heater has a circuit protection device, after the temperature reaches a certain temperature, it will stop heating, and the water vapor pressure in the water heater is not enough, and the water vapor cannot continue to reach all parts of the heating. Therefore, it is not effective to connect with heating.

As the temperature gradually decreases, the use of heating exchangers has also become a necessity in people's lives. And what kind of material to choose for the heating exchanger is also a concern for many people. So, what kind of material heating exchanger is better?

First of all, we need to understand the role of heating exchangers. The heating exchanger is to transport the hot water in the boiler to the room through the pipe, and then dissipate the heat through the radiator, so as to achieve the purpose of indoor heating. Therefore, the material of the heating exchanger must have good thermal conductivity and corrosion resistance.

At present, the heating exchangers on the market are mainly made of copper, aluminum, stainless steel, steel and other materials. Among them, copper heating exchangers have excellent thermal conductivity and corrosion resistance, and have been widely used. However, copper heating exchangers are relatively high, and maintenance and maintenance also require a certain amount of money.

Aluminium heating exchangers are a more economical and practical option. The aluminum heating exchanger has high thermal conductivity and good corrosion resistance, and it is relatively low compared to the socks and has a long service life. However, aluminum heating exchangers have low strength and are prone to deformation and wear, so they need to be used and maintained.

Stainless steel heating exchangers are a more environmentally friendly and durable option. Stainless steel has good oxidation and corrosion resistance, and is not easy to rust and deform. Stainless steel heating exchangers have a long service life and do not affect water quality, making them a healthier and more environmentally friendly option.

However, the ** of stainless steel heating exchangers is relatively high.

Steel heating exchangers are one of the more common options. The steel heating exchanger has a relatively low level, but the thermal conductivity and corrosion resistance are relatively poor, it is easy to rust and deform, and the service life is relatively short. As a result, steel heating exchangers need to be serviced and replaced frequently.

To sum up, what kind of heating exchanger material to choose depends on the user's actual needs and budget. For users who are looking for high quality and high efficiency, copper heating exchangers and stainless steel heating exchangers are better choices. For those on a budget, aluminum and steel heating exchangers are more economical and practical options.