Is it better to decorate the house and the cabinets made by carpentry or to buy ready made?What do y

For many people who decorate for the first time, whether to buy the wardrobe directly or find itCarpentry will do it. Some people say that the cabinet made of carpentry ***, but some people say that it is better to buy ready-made quality.

In fact, there is no unified definition of this. Let's take a look at the benefits of a finished wardrobe.

The style of the finished wardrobe has been confirmed, and you can see the actual product, and you can choose according to your style preference. Then there is environmental protection, the finished wardrobe because it has been made for a long time, its formaldehyde has been well dispersed, and there will be no excess pungent smell in the home after buying it back. And because the finished wardrobe is mass-produced, it is not as high as the custom wardrobe, and people who are not very good in economic conditions can choose to use the finished wardrobe.

Then let's take a look at the benefits of a wardrobe made of carpentry. First of all, the material is guaranteed, we can buy the material ourselves and let him make it, so that it will save a little money overall. The time can also be greatly shortened, and you don't have to spend more time to buy, but there is still an obvious disadvantage.

It is a wardrobe made of carpentry, its design may not be what you want, it may not be very practical, and the skilled carpentry is still more expensive. <>

Personally, I think it's better to buy a finished cabinet because of its quality and you can see its details. My own cabinets are made of carpentry. Overall, it's just two words, bad!

A lot of details are not handled well, and it can even be said that they are handled poorly. Of course, there are also some carpenters with good craftsmanship who can make good cabinets. This has to be analyzed according to the actual situation, but there is a very intuitive advantage of buying a cabinet on the spot, that is, its design does not meet your needs, you can see it at a glance.

You don't have to think about it yourself. <>

In general, in the purchase of wardrobes, we still have to consider many aspects. Personally, it is recommended to make a custom wardrobe conditionally, and his quality can be well guaranteed, but it is high.

I think it's better to do carpentry;Because this is cheaper, the materials are also self-chosen, you can control, you can make your favorite, and it is relatively environmentally friendly.

It is better to choose carpentry to do better, so that it can be tailor-made and there will be no problems.

I think it's better to use carpentry, so that you can design it reasonably according to your family situation, and it is more beautiful.

Home decoration, cabinet is better to find a carpenter to do it yourself, or to buy the finished product?

1.**Carpentry is more cost-effective,**, custom wardrobe selected plates.

Usually solid wood particleboard.

It has good compressive resistance and is not easy to deform. The cost is often more expensive, coupled with professional design, mature workmanship, and perfect after-sales service to ensure quality, environmental protection, and health, and ** will be slightly higher. The cost of the carpenter's door-to-door call includes:

Material cost + carpentry cost + hardware auxiliary material cost + paint cost, there are no other intermediate costs, so it is cheaper.

2.The finished product is more environmentally friendly: the customized wardrobe board has passed the national environmental protection standard.

When choosing, you can ask for an environmental protection test report to ensure the environmental protection of the board. When installing a custom wardrobe, you only need to assemble a custom panel, which is simple and convenient to install. On-site woodworking production, all the boards are cut on site, and glue is also used for the bonding part, the content of harmful substances is relatively high, and the environmental protection performance is not enough.

And it hasn't been specifically tested. On-site production is relatively noisy, generating a lot of garbage and dust. The carpentry site makes cabinets, and you can freely choose the boards.

Generally, there are fir cores, pine cores, and multi-layer boards.

coreboard, some solid wood boards.

It's the real thing. You don't have to worry about the solidity of your on-site wardrobe. There are also paint-free boards.

Paint-free is more environmentally friendly.

3.It is better to do carpentry and make your own cabinet, which can be adjusted according to the size of the room. This avoids the drawbacks of buying cabinets with limited sizes.

Housing prices are so expensive nowadays that every inch of land in the room must be put to good use. By building your own cabinets, you can make full use of every inch of space for storage, making other parts appear more empty, which is conducive to increasing the sense of space in the room.

Make customizations. And the choice of wardrobe styles made by carpenters on site is limited. If you're unlucky and come across a carpenter with poor craftsmanship, the cabinets you make really won't look good. The edge banding process and firmness of custom cabinets are better than that of carpentry, and they are more beautiful.

It is best to choose the finished product, so that there will not be a lot of formaldehyde in the home, and you can also move in directly after a month of decoration.

I think it's better to find a carpenter, because if you do carpentry, it will be done according to the size of the room, which is very appropriate, and the size is just right, while the finished product may not be very suitable for the size you buy, and the finished product is more expensive.

Personally, I think it's better to find a carpenter by yourself in the situation, because this can effectively meet your inner needs, and it will also effectively save related costs, which is particularly practical.

In the decoration process, the choice of carpentry cabinets or cabinets customized for the whole house is not entirely dependent on the production method, but related to materials, technology, design and other factors.

The specific decoration of the house can be calculated here, just enter the area + city, calculate the decoration in 3 seconds, know the real ** in advance, and easily grasp the decoration company: [Click here, free decoration**].

The cabinets made by carpentry are generally customized and installed on site according to the needs of the homeowner and the actual situation of the house. The advantages of this approach are that it makes good use of space, has a flexible design, and can be customized to individual preferences and needs. Moreover, if the woodworking chosen is skilled, its workmanship and quality can also be guaranteed.

However, the disadvantage of this method is that it has a long period and requires on-site construction, which will produce a certain amount of noise and dust. On the first floor, the cost of the cabinet made by carpentry mainly depends on the material and man-hours, generally speaking, the market is 300-500 yuan square meters.

Whole-house customized cabinets are produced in the factory according to a pre-designed plan, and then transported to the site for installation. The advantages of this method are that the process is standardized, the quality is more advanced, and the construction speed is fast, and it will not produce too much noise and dust. However, the design of a whole-house customized cabinet may not be as flexible as a woodworking cabinet, and it cannot be completely customized according to personal preferences and needs.

On the market, the cost of a customized cabinet for the whole house mainly depends on the material and design, generally speaking, the market is 500-1000 yuan square meters.

Therefore, the choice of a cabinet made by carpentry or a cabinet customized by the whole house mainly depends on your needs for quality, design, quality and construction period. If you are more concerned about personalized design and **, then a cabinet made of carpentry may be more suitable for you. If you are more concerned about quality and speed of construction, then a whole-house custom cabinet may be more suitable for you.

Finally, it is recommended to recommend our "Tuba Rabbit", Tuba Rabbit has 110,000 decoration companies and first-class businessmen in his hands, and the direct sales of building materials are affordable. Tuba Rabbit is selected for decoration, and Tuba Rabbit can accompany the signing of the contract for free, "decorate first and then make payment", reducing the worries of the owners. For more decoration information, welcome to visit:

Click to enter, professional customer service free consultation good company].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

When decorating, the quality of the cabinets made by carpenters will be better; You should choose a cabinet made by carpenter, because this can supervise the work, and you can also transform it according to the actual situation, choose furniture that is suitable for the decoration style and house type, and choose according to your own preferences when choosing the color.

It must be that the whole house custom cabinet is better. I think you can choose the whole house customization, not only *** but also very good-looking.

The cabinets made by carpentry will be more practical, because the cabinets made by carpentry are made of solid wood boards, and the cabinets customized by the whole house are particle boards, and the cabinets of solid wood boards are ***, and if you have money, you should choose the whole house customization.

Cost-effective, a good custom cabinet, all of us people, cheap, convenient, and after-sales service can be regarded as the preferred goods of the people, just don't buy that kind of brand, strong premium and high price IQ, high tax cut, there is nothing wrong with customization. Let's talk about wood boards first, I know that there are "solid wood boards", "Malsix decks" and "rubber dowels (solid wood particle boards)", the better ones are naturally solid wood boards, and the second is solid wood particle boards. Solid wood particle board is the kind of wood that is extruded with wood residue and a lot of glue, and a layer of good-looking leather is pasted on the outside, which is also a key application for decoration companies or custom furniture or furniture manufacturers.

Malacca is a little better, it has edge banding and no need to spray.

Some people feel that the customized style is novel and fashionable. This point is indeed recognized, the carpenter master can't do that kind of complicated hollow carved pattern design, but the style of the carpenter master is not decades will not change, and others will catch up with some fashion trends to make a new look. Gradually, I also felt that it was not good-looking, and then I went to see what others had done, and it was actually very good, and the solid wood board would also make you carve lines on the surface.

The average family does not use that kind of complicated hollow design (dirty and messy), and it is easy to use. If you really like which design scheme, you can search for a map on the Internet and let the carpenter master come to you.

When you don't have too many economic conditions, making cabinets on the spot is a good choice, I don't stipulate that it is beautiful and generous, only limited to easy to use and usable. This is no problem now, a few years ago or inappropriate, a few years ago made a wooden cabinet on the spot must be praised, on the spot to do Roman Empire bamboo, finely carved, pure solid wood, now basically does not exist, the cost of production is relatively high.

The customization of the processing plant is not the same, the box door is uniformly produced and manufactured, but the project cost is a little more expensive, and there may be customized cabinets to know, the purpose is to process differently, and the production process is different, one is the custom step, the other is the production process. And the customized box is all processed and manufactured by the processing plant, and the special edging machinery and equipment.

I think it's better to buy ready-made, because the furniture on the market is now diverse, with many styles, and the color, style, pattern and material can be carefully selected, all of which are delivered to the door and can be used in a short time; If it is a carpenter to build a cabinet, it may be more troublesome to choose some materials by yourself, and the workmanship requirements are very strict, if it is not done well, it may affect the subsequent use, and the cabinet made is more rigid and inflexible.

The cabinet should be better to choose carpentry, carpentry is more experienced in this regard, and it is also more capable, but if you buy ready-made, there may be problems, and the quality can not be guaranteed.

Buy ready-made, ready-made has quality assurance, and at the same time it is very convenient, the difference is manual or mechanized.

This should be determined according to the specific size, some of the more special styles are best to choose to buy ready-made, some of the more ordinary can be customized, customized to be more suitable, more beautiful and beautiful.