What are the steps involved in installing a solid wood wardrobe?

Solid wood wardrobes have always been popular with the public because it is durable, ***, and also affordable. So how should families install solid wood wardrobes after buying them? Let me tell you about that.

Start by installing the cabinet. We can first place the wooden board on the left side of the cabinet on the ground, punch the screw on top of the glued hole, and then fix the screw and the back pull bar together to lock the lock handle.

Next, install the top plate to give the wardrobe a rough look.

Then install the bottom plate, put the screw on the bottom plate, fix the corner strips, and combine the top plate and the bottom plate that were assembled separately before. Then the outer contours of the solid wood wardrobe are almost installed.

Then assemble the drawers. At the beginning, we can first take out the solid wood wardrobe trouser rack and drawers and put them aside, first install the side screw of the drawer, install the side panel, lock and install the upper drawer, put it into the drawer board, and then screw it tight, and finally install the slide rails on both sides of the drawer, so that the drawer installation is completed.

Install the trouser hanger. First, install a steel pipe on the tail plate of the trouser rack, put screws at both ends of the tail plate, and tighten the two side plates of the trouser rack, so that the trouser rack is completed.

Install the cabinet doors. After the above steps are done, the wardrobe is almost installed, and the next step is to install the cabinet door. First fix the middle door hinges on the solid wood door panels and tighten them with screws, then hinge the middle doors on all the door panels, and then fix them all to the cabinet with screws.

The wardrobe handle can be screwed to the door, so that the first door of the solid wood wardrobe is completed, and the other door is firmly fixed with the same operation, and the whole solid wood wardrobe is assembled.

After all is completed, you need to check the installation effect to see if there are any problems, such as whether the door opening and closing is relatively smooth, whether the screws are tightened, etc. Installing a solid wood wardrobe is not an easy task. If you don't understand anything, you should refer to the solid wood wardrobe installation program diagram in time to avoid mistakes and rework.

The above are the installation steps of solid wood wardrobe, I hope it will help you.

Step 1 – Start the installation from the side against the wall.

Place the wide side plate flat on the ground, see whether the hole spacing on the wooden board is consistent with the description drawing, install the three-in-one single connecting rod, nail the solid layer to the wooden plug, fix it on the wide side plate, the top plate handle hole is facing up, the rest of the solid layer is facing down, and the foot line big handle hole is facing inward.

Step 2 – Nail the back plate.

First, place the assembled whole wardrobe on the side of the pre-laid cushion cloth, and flatten the side panels of the wardrobe on the same plane. Use a ruler to measure the diagonal dimensions of the cabinet and adjust it to equal.

Next, install the first back panel from the wide side panels, noting that if there is a fixing layer nail in the middle of the wooden wardrobe, mark the centerline of the fixing layer with a pencil before applying the nail.

Step 3 – Install the L-frame.

First, use the side plate of the L frame to make a parallel line on the corresponding side plate, and then move it up 9mm to draw the center line of the three-in-one rubber particles. Draw a parallel line on the corresponding bottom plate with the bottom plate of the L frame, and draw the center line of three rubber particles with 9mm in the flat line. Use a 10mm drill bit to open a hole, and the hole depth is 10-20mm.

Attach the single rod. After the l-frame is installed, fix the nails on the back plate.

Step 4 – Install the wardrobe shelf.

Stand one person on each side of the wardrobe and lift the wardrobe up and tilt it back. Lift the wardrobe firmly and move it backwards, being careful not to scratch the floors and walls. Put the 3-in-1 plastic pellets into the drawer holes of the wardrobe, and then connect the side panels on both sides with the drawer layer.

Step 5 - Install the three-section track and the push-pull mirror.

First of all, the track should be pressed against the drawer of the wardrobe, flush with the floor of the drawer, and the screws of the mobile bus rail fixing sub-rail should be installed on the vertical eye of the sub-rail. After the drawer is installed, it is adjusted so that the drawer surface is flat and the gap around it is even. Finally, install fixing screws on the transverse eye of the sub-rail and the vertical eye of the parent rail.

First determine the location of the wardrobe, install the cabinet body, install the top plate and bottom plate, install the drawers, and finally install the cabinet door.

Be sure to fix the cabinet in advance, and then fix the glued place with glue, fix it with screws, and then lock the lock handle, and install accessories, pay attention to stability.

First of all, it should be installed according to the instructions, and some wooden boards should be spliced together when installing, and then the screws should be screwed on.

What are the steps to install a wardrobe?

1. Check whether the tools are complete.

First of all, before the installer goes out, he should check whether the hardware tools he carries are complete, which is an important step for the smooth installation of the wardrobe, after all, it will be a waste of time if you forget to bring the tools during the installation process.

2. Clean up the installation position.

Before installation, let the customer determine the installation location of the wardrobe and clean the installation location of the wardrobe in advance.

3. Whether the wardrobe parts are complete.

Before installation, we disassemble the panels of the wardrobe, and then place them in accordance with the installation order and position, check whether the parts are complete, and the same is true for the finished wardrobe of the installed stove. If the spare parts are incomplete, ask the manufacturer to reissue them immediately, or explain that the manufacturer will pay for the spare parts.

4. Install the wardrobe floor.

The first step in installing a wardrobe into the wall is to install the wardrobe floor, which is prepared for the wall by placing the floor on the freshly cleaned floor.

5. Fix the wardrobe structure.

Then install the side panels and back panels of the wardrobe according to the installation design drawings to fix the overall structure of the wardrobe. At this time, the structure of the wardrobe is relatively fragile, and it is necessary to pay attention to the wardrobe to prevent tilting.

6. Fixing the top plate.

Prepare a universal ladder, climb up the ladder to lift the roof of the wardrobe to prevent it from detaching from the side panels, and then secure the roof with 3-in-1 expansion screws.

7. Fix the wardrobe shelf.

Place the shelf where the nut is already embedded and secure the partition. At this point, take care to adjust the fixed position of the shelves, back panels and side panels.

Furniture is an indispensable thing in our lives, it brings us convenience and practicality, and at the same time, it also beautifies our home. And now, solid wood furniture has not faded out of our sight with the passage of time, but has become an indispensable part of our lives with its practicality, beauty and thick sense of history. A lot of solid wood furniture is purchased and assembled for us by ourselves or professionals.

Next, I will explain to you the precautions for the installation of solid wood wardrobes and what problems should be paid attention to.

Generally speaking, after purchasing a wardrobe, the merchant will disassemble the furniture and then transport it so that it is easy to move. Assembling solid wood furniture requires experience and skills, so what are the precautions when assembling solid wood furniture? Let me find out.

Note 1.

First of all, we need to know the specific size, width, height, and depth of our customized wardrobe room, so that we can ask the designer to be in accordance with this size at that time, in case of falling into the trap.

Note defeat imitation item 2.

Then we need to consider the living habits and hopes of ourselves and our families, whether we should store them by season, by gender, or by person.

Note 3.

Avoid waste, if you don't have a lot of budget for your wardrobe, then forget about those personalized designs, a practical custom wardrobe is suitable, those features will only make you spend more of your budget.

Note 4.

There are many different styles of custom-made wardrobes, modern and simple, Mediterranean, pastoral, American country or Chinese classical. The style of your custom wardrobe is best matched to your own bedroom décor.

Note 5.

Customized wardrobes must also pay attention to the relationship between the texture and force of the selected material. Professional manufacturers choose environmentally friendly plates that meet the national testing standards, while some manufacturers choose some inferior plates that have no test reports and pose a potential threat to human health. To buy a wardrobe, you should see whether the merchant has a plate test report and a coherent test certificate from the national powerful Juzi testing department.

Note 6.

whether the functions are complete; Whether the function of the wardrobe can meet their own needs, whether the accessories are complete, and whether it can provide convenient and comfortable supporting functions. At present, some wardrobe factories have successively launched practical and beautiful accessories, such as sliding mirrors, tie drawers, underwear drawers, trouser racks, fashion drawers, pull baskets, etc., actively promoting the "people-oriented" concept of quality life. That's all for the precautions for the installation of solid wood wardrobes.

Furniture is a tool that we can not lack in our daily life, and it can bring us great uses. Not only can it solve our problem of placing things, but it can also help us beautify our family. For solid wood furniture, he has not disappeared into our lives with time.

On the contrary, it makes us feel more cordial, at present, most of the solid wood furniture needs to be installed by professionals after we buy it, or we install it ourselves. Let's talk about some of the places that need to be paid attention to when installing based on my own experience. 

Usually after we buy a solid wood wardrobe, because it has to be transported, the merchant will disassemble the furniture, because it can be more convenient to transport. And for us to buy the home, we need to assemble the solid wood furniture. Don't underestimate the assembly, this is also a certain skill and attention to the spring stupid.

Let's talk about the idea.

Solid wood wardrobe. The first thing we need to pay attention to is that before buying furniture, we first measure the dimensions of our house. This includes width, height, depth, and so on.

When we buy, we also need to buy according to this size. In addition, when buying, you should pay attention to letting the designer be ** at that time to avoid the trap of **.

Solid wood wardrobe. The second issue we need to pay attention to is to fully consider the living habits and corresponding storage of the family. For seasonal storage or gender-based storage.

The third issue we need to pay attention to is to avoid waste, and we must pay attention to the actual personality when buying a wardrobe. Of course, once we have a rich budget, we can also make a personalized and unique design. If you only emphasize individuality and do not consider practicality, then it will not work.

Solid wood wardrobe. The fourth problem we need to pay attention to is that once we need to customize the whole wardrobe, then we also need to consider its different styles, as well as different color matching. There are plenty of stylistic options, but which one belongs to you depends on the specific setting of your room.

Solid wood wardrobe. The fifth point we need to pay attention to is that when we order a wardrobe, we must pay attention to the choice of its original material texture and the relationship between the forces that can be withheld. For some reports, the merchant uses the unchecked.

In this way, it may bring some harm to the pickpocket. There are some defective materials that are shoddy, which is also a certain threat to us. We must pay attention to the official test report when purchasing.

The last thing we need to pay attention to is whether the functions of solid wood wardrobe installation are complete; Its own function is not able to meet their own needs, whether the accessories are complete, and how about comfort.

For the installation of solid wood furniture, does everyone have an understanding of the branch hall? When carrying out the installation, we must also pay attention to the above requirements. Because if you don't pay attention, there is a high chance that some unnecessary troubles will occur.

These troubles will cause us great inconvenience in use.

You can get it for free