How do you add luminosity to black tones and paints?

I think you must be using a relatively cheap toner for construction machinery, I used to work in a paint factory for many years, and now I am doing coating application technology, although it is not research and development, but I think the choice of toner is very important when designing black paint, if the cost accounting can, I recommend improving from the formula design, after all, after doing a good job in the construction stage to spray more layers will increase the bad opportunities and costs, it is better to choose when designing, although the paint cost increases a little, However, it meets the customer's requirements and avoids duplicate construction. It's still relatively cost-effective. You can ask your technician to increase the percentage of resin without hindering the hiding power, plus choose the right carbon black, this should not be a difficult thing, gray paint is difficult to adjust This is a big problem in the tinting technology, because the carbon black produced by each company has a difference in hue, it is recommended that in the gray paint you can determine a carbon black and then strictly control the amount of formula input, a little more each production, and then communicate with customers, only promote this gray paint, if you are using the method of paint to adjust, It is recommended to strengthen production management, because once there is a problem with the white pulp produced, such as titanium dioxide, it will bring great trouble to the subsequent color mixing. Beg.

After the black and yellow topcoats are dried, a layer of varnish will have a brightness, that is, phenolic varnish, or alkyd varnish.

Coffee is a generous but not tacky color, it is widely used in daily life, coffee does not look as bright as red and orange but it is not as dull as black, and it is one of the most popular clothing colors this year. Coffee color is widely used in many occasions, and many colors can be matched, but coffee color is not one of the three primary colors, so it needs to be adjusted later, so, how to adjust the coffee color? How do you adjust the brown color of paint?

What precautions do we have when grading paints? Now to introduce it to you.

How to adjust the color of coffee

Method 1: Black + Blue + Red.

Adjust the color depth you want to black to the appropriate depth, and then add the other two additional colors.

Black is predominant. Method 2:

It is most reliable to use ripe brown and ochre tones, and it is easy to strip out. Use as little as possible, not as much as possible. In particular, dark colors are not sensitive enough for the human eye and are not easy to adjust, but because they are dark colors, there is no need to adjust them to special standards.

Method 3: Use the three primary colors of pigments (red, yellow, blue) to mix black with three colors, and then add more yellow and a small amount of red, how much to add, according to your needs.

PS Modulation R: 96 G: 56 B: 17

c：59 m：76 y：100 k：39

How do you adjust the brown color of paint?

Red 12% + Yellow 8% + Black 3% + White 77%.

The shade of the desired shade can be added or subtracted from the white.

The brown color of the paint is adjusted in this way, pay attention to the proportion: red 12% + yellow 8% + black 3% + white 77%, so that you can adjust the coffee color, if you also need to control the depth of the coffee color is also very simple, if you want to be darker, reduce the proportion of white, if it is lighter, increase the proportion of white.

Paint toning precautions are as follows:

1: Be cautious when mixing paint, generally try a small sample first, first find the number of color matching paints, and then prepare a large sample according to the sample results. The secondary and secondary colors should be mixed separately in a small container.

2: First add the main color (the color with a large amount and small tinting power in the color matching), and then slowly add the dark color (or color matching) with large dyeing ability, and stir constantly to observe the color change at any time.

3: "From light to deep", especially add pigments with strong tinting strength, do not overdo it.

4: There will be slight differences in color between the paint and the dried coating film when color matching. When various paints are dried, the color deepens.

5: In advance, you should understand the degree of floating of the primary color in the compound paint and the change of the paint, especially the amino paint and perchloroethylene coating, which need to pay more attention.

In fact, these three methods are similar, although they are all coffee colors, but the hue of different methods will still have a certain difference of 1, and how to adjust the brown color of paint is also introduced. There is a certain proportion of the modulation of paint and brown color, and there are some precautions when blending, I hope the introduction can help you.

The dark brown color is similar to coffee and brown, and you can refer to the blending method of brown paint.

Red + Yellow + Black = Dark Brown.

Start by pouring the red paint into a small bucket and blend it with the black and yellow color essences, and keep contrasting them with the color palette you want to make. According to the color effect you want, add more or less a certain color, and you can add it little by little when blending, not too much at once. If the color is too light, you can add more paint to deepen the color, but if the color is accidentally darkened, it will be difficult to recover.

Note: The paint will look darker before it dries than it does after it dries.

Start by preparing the red, yellow, and blue colors and placing them on the palette, with the same amount of each color.

2.Mix them together with a paintbrush, or with a special palette knife, and mix them until they turn black.

3.If the color is not black enough, you can add some more blue to the mixture.

Hello, Hate Happy to answer for you: We can use overlay varnish to modulate, if you want a pure black effect, you need to add black paint to it. You can add 10% and 20% white paint with a toner and mix well with black paint.

However, you should not put too much of it, as this will affect its color to a certain extent. Moreover, it is not possible to add too much color paste, which will interfere with its film-forming effect.

Questions. Why don't you call it back?

Method: 1. Do not mix water when mixing color, if it is not easy to mix with water. It is recommended that the color is darker than ideal when grading.

Otherwise, the color will be light after mixing with water and brushing dry. 2. Mixed with water, it can be mixed directly into the original latex paint barrel. Divide the latex paint in the bucket into 2 halves and mix them to avoid sprinkling them with water.

When mixing water, mix according to the construction instructions on the outer packaging of the latex paint barrel.

Add a small amount of Rickett fluorescent brightener RQT-A-1