Cotton wool clothes are often bitten by insects, how to prevent it

First of all, you should know that the insect that bites the clothing is called the "book fish", which not only bites many small holes in the clothing, but also bites through the thick books of the hardcover. The body is silvery-white and usually about 5 mm long. Recommendations:

1.Take out all the clothes in the cupboard, turn them over and pat them; 2..Buy some transparent camphor essence and put it in the cabinet (transparent camphor essence is very damaging to the human body); 3.

Once a year near June 6 of the lunar calendar, the contents of the wardrobe are turned over. This should control the growth of bugs. 4.

Do not wear pure wool clothes (even if you wear them once) in the wardrobe without washing and drying. Hope this answer can help you.

To prevent cotton and wool clothes from being bitten by insects, here are some suggestions:

1.Clean your wardrobe: Take out all the clothes in your closet and do a thorough cleaning, including hangers, drawers, and storage bins. When you're done cleaning, put your clothes back in your closet and make sure the inside of your wardrobe stays dry and ventilated.

2.Use insect repellents: Place mothballs or hygiene balls around the wardrobe or hang them in a cabinet to prevent insect growth.

3.Protect clothing: For woolen clothing, you can wrap it in cloth and place it on the top layer of the suitcase. When storing, try to keep the back side of the garment facing outward, which can prevent weathering and fading, and is more beneficial to moisture and insect damage.

4.Dry regularly: Depending on the seasons and the length of storage, dry your clothes a few more times at the right time. Long-term sealing without ventilation is the cause of insect infestation.

5.Be aware of moisture: Avoid leaving damp clothes in your closet, as it can cause bugs to grow more easily if the wardrobe gets wet.

The above are some suggestions to prevent cotton and wool clothes from being bitten by insects, I hope it will help you.

Most of them are pests of the beetle family such as the black beetle, and this insect is particularly stubborn and nasty, and it is resistant to hunger and cold. A more effective method is aluminum phosphide fumigation.

1. Make sure that there are no people, no animals living and no gaps with neighbors. Seal the room. Aluminum phosphide tablets are put into 2 tablets per cubic meter, and doors and windows are closed for 7 days. It takes 7 days to be inhabitable after being deflated.

Clothes can also be packed into a sealed bag, fumigated for 7 days, and deflated in an unmanned environment for 7 days.

Be careful to stay away from people and animals.

2. Seal the clothes with a plastic bag after washing. It is best to pump. It can prevent the invasion of pests.

Hello, the result of my inquiry for you is to put more camphor, before putting it into the box, remember to wash it, do not put the unwashed into it.

Cotton clothes seem to have been bitten out of a hole by a small insect, what to do if the clothes at home seem to bite out of a small hole, how to deal with Hello, the result of my inquiry for you is to put more camphor, before putting it into the box, remember to wash it, do not put the unwashed into it.

Just put the clothes on the outside to wear, and shorts.

Preparation materials: needle, thread.

1. Pierce through the back of the sweater.

2. After the needle is removed, insert it at a position of two millimeters next to it, and then puncture it through the hole.

3. Use this method to sew around the hole for a week.

4. Use the same sewing method to place the second circle.

5. Use the same sewing method to place the third circle.

6. After all the holes are sewn, insert the needle into the middle position, and then collect the needle from the opposite side.

This repair method is the most basic method of filling the hole, and it is very simple and practical to operate.

Spare tools: threads and needles of the same color as the sweater.

The cashmere sweater is moth-eaten and needs to be repaired in time, otherwise it will cause a large part to fall off. It is recommended to go to a dry cleaner or a nearby cashmere shop to find a professional to solve the problem, otherwise it is impossible to guarantee the appearance, strength and comfort after weaving, which is the safest and most convenient way. It is also woven by itself, and it is only suitable for cashmere sweaters that are not very large in moth-eaten holes, and you can sew up the holes.

1. First find the location of the hole in the sweater.

2. With the thread of the same color of the sweater, ready to start sewing.

3. Thread the needle and thread out of the clothes in the hole of the sweater, and walk the thread around the perimeter.

4. Tighten the stitch after sewing, and the hole will be tightened.

5. Then turn the sweater over to the back, and wear the needle and thread to the back, ready to collect the needle and hide the needle and thread.

6. Collect the needle and thread behind the back and tie the knot to complete the sewing.

If the cardigan is sewn and you try to repair it as soon as possible, you can use a moth-proof frame to put it in the closet where you put your sweater in the future.

1. When repairing woolen sweaters, buy threads correctly when matching colors.

2. Push the repair needle into the hole, towards the sweater inside, and start repairing along the tight edges. Inside-out, this helps to close the cardigan.

3. Start threading the needle and carefully suture the hole. If the extension hole of the seam is exceeded, the vertical part of the hole, start sewing the first seam first, and then the horizontal part. Do not attempt to close a hole that is too large for the needle at a time.

4. How to repair the holes in the woolen sweater clothing, if you want to modify your sweater, you can repair a flower or the sun.

5. Buy colored yarn and threaded yarn needles for special sewing.

6. Use a long needle to patch from the edge of one hole to another. In the opposite way, the thickness of the yarn can be strengthened. If you look at it from a distance, it looks more like a circle appearing on the outside of the circle stitched out.

7. Flower petals can be sewn on the hole to turn into a floral pattern. If you put the cardigan in the sun, sew a circle of "rays" to make it shine more in the sun, use embroidery needles to make the design look more special.

8. Make a sweater in a pocket from braided yarn if the hole is in the appropriate place in the pocket of the sweater.

9. If you wear a cardigan with a beautiful brooch, maybe no one will know that there is a hole under the brooch. The hole in the chest part is covered with a brooch to make it look more chic.

10. Fold the edges of the cardigan sleeves, cuffs, maybe the holes are in the sleeves.

12. Many dry cleaners specialize in woolen sweater garment repair. Your patch will require a professional tailor or dry cleaner who specializes in cardigan garment repair.

13. Ask the employer of the woolen garment carefully and ask them if they are able to fix the holes. And you can give it to the repair shop and let them choose a special pinhole or weaving to repair the cardigan.

It's very distressing to throw away the woolen sweater worm bite hole, and it's so practical to share the full tutorial of the enlarged version of the repair.

Hello! If the clothes are damaged, if you are not a professional, in order to ensure that the repaired clothes are comfortable to wear and avoid damage to the clothes, it is recommended to consult or repair the clothes in a professional clothing repair shop.

If there are local stains on the clothes in daily life, such as oil stains, fruit stains, etc., the following methods can be used to clean them

1. When the clothes are dry, apply the original solution of the special laundry detergent for hand washing to the stains, completely cover the stains, let it stand for 5 minutes (it can be gently scrubbed), and add laundry detergent for regular washing;

2. If the stain cannot be removed after the above methods, then.

1) Pure white cotton, linen, polyester clothing: Add 1 bottle cap (40g) of white clothes (600g specification) to each half basin of water (about 2 liters), stir well, soak in the clothes for 30min, and rinse clean.

If the stains are not removed after 2 hours, take out the clothes, add white clothes to the basin (add 1 bottle cap per half basin of water), stir well, put in the clothes and continue soaking, and the cumulative soaking time does not exceed 6 hours.

2) White clothes of colored or other materials: put the clothes into the basin, the stain part is attached to the bottom of the basin, measure 1 4 caps (10 grams) of colored clothes and 1 4 caps (10 grams) of the collar with the color stain net (600g specification) of colored clothes, pour them on the stains, cover the stains with other non-stained parts of the clothes, prevent air drying, let stand for 2 hours, and rinse clean. If the stain remains unremoved after 2 hours, it can be left on for an extended period of time overnight.

Precautions: 1. White clothes are suitable for white cotton, linen, polyester, polyester cotton, cotton and linen fabrics, do not use colored clothes (including white background stripes, white background checkered, white background printing), do not use silk wool spandex nylon and other non-chlorine bleaching clothes, do not directly use the original solution.

2. Color stains are not suitable for fading clothes and dry cleaning, avoid touching metal buttons, zippers, metal ornaments, etc. on the clothes when using, and avoid direct sunlight.

Preparation materials: needle, thread.

1. Pierce through the back of the sweater.

2. After the needle is removed, insert it at a position of two millimeters next to it, and then puncture it through the hole.

3. Use this method to sew around the hole for a week.

4. Use the same sewing method to place the second circle.

5. Use the same sewing method to place the third circle.

6. After the hole is fully sewn into the nuclear hall, insert the needle into the middle position, and then collect the needle from the reverse side.

This repair method is the most basic method of filling holes, and it is very simple and practical to operate.