-
Ground source trigeneration series unit is a kind of high-efficiency and energy-saving equipment that uses shallow underground geothermal energy as cold (heat) to provide heating, cooling and hot water to the room. It has stable performance, high energy efficiency ratio and long service life, especially suitable as a floor heating heat source to replace the traditional central heating or boiler system to heat the room, with higher operation efficiency and better comfort, which is an ideal choice for heating in cold areas.
-
Air energy tri-generation ** air conditioner, it has the following four characteristics:
1.Powerful: Air energy tri-generation air conditioner has three functions of cooling, heating and hot water at the same time, and can realize all the condensation waste heat in the refrigeration + hot water operation mode, and the initial investment and operating costs are more than 10 compared with the traditional air conditioning + water heater system.
2.Total heat technology: During the summer refrigeration operation, all the heat originally discharged into the environment is used to heat domestic water, which not only alleviates the heat island effect but also reduces the cost of hot water, so as to achieve the purpose of energy saving and consumption reduction.
3.Stable and reliable: The new system design overcomes the shortcomings of the traditional thermal system with long circuit and difficult oil return, and cooperates with internationally renowned brand compressors and patented high-efficiency heat exchangers to make refrigeration and heating more powerful, and the unit runs stably and reliably.
4.Intelligent control: using ** touch screen buttons and Chinese dot matrix LCD controller, the operation mode is fully automatic switching, and the use is more worry-free.
-
Triple supply refers to refrigeration, heating, and domestic hot water, and Shandong Fulda water ground source heat pump has the function of providing refrigeration, heating, and domestic hot water at the same time.
-
PHNIX ground source heat pump is a form of water source heat pump, which uses water and ground energy (groundwater, soil or surface water) for cold and heat exchange as the cold and heat source of water source heat pump, and "takes" the heat in the ground energy in winter to supply indoor heating, at this time the ground energy is the "heat source"; In summer, indoor heat is taken out and released into groundwater, soil or surface water, and the ground energy is a "cold source" at this time.
-
The purpose of the ground source heat pump is to effectively transfer the heat emitted by the ground source heat pump host to the soil through the reduction of the temperature of the circulating water of the underground pipe during refrigeration in summer. On the contrary, winter heating uses the circulating water in the buried heat exchange pipe to effectively absorb the temperature in the soil, so that the ground source heat pump host can be heated, and the heat exchange is carried out with the room through the capillary network system, so that the indoor temperature is kept around 24 26 in summer and 20 22 in winter. Generally speaking, the ground source heat pump system is buried deep underground, acting as the heart of the scientific and technological system, imitating the capillary layout of the human body through capillary radiation air conditioning, using water as the medium for cold and heat exchange, radiation to regulate the indoor temperature, and embedding the wall through the capillary network 3 4mm pipes to achieve uniform heating and cooling of the whole house, maintaining a comfortable temperature range of 20-22 in winter and 24-26 in summer, and truly realizing the wish of being at home all year round
-
Combined air energy is the use of an air energy heat pump.
At the same time, it provides "hot water + heating" or "heating + cooling" services for families. Therefore, if you have friends who want to buy air energy co-supply, you must first figure out your needs, whether you want "hot water + heating" or "heating + cooling".
Advantage 1: Energy saving.
For many users, the biggest reason that prevents them from installing heating in their homes is that the heating is "affordable, not affordable". With gas wall-hung boilers and other heating equipment, a heating season is rare.
Five or six thousand yuan, or more than tens of thousands of yuan in heating costs, is really distressing. However, if the air energy is used for heating, the heating cost is very low.
According to the statistics of China's leading air energy brand - Newentai in 2016, Fangshan, Beijing.
200 households use Nuentai air energy heat pump for heating, and the average electricity consumption per household is 2,500 kWh in one heating season (four months). According to the electricity price of one kilowatt-hour, only 1,250 yuan is needed for electricity in one winter.
Advantage 2: High comfort.
Traditional air conditioners are based on "refrigerant."
In order to convey the medium, by controlling the refrigerant circulation volume of the compressor and the refrigerant flow rate into each heat exchanger in the room, the indoor cooling and heating load is automatically adjusted and satisfied.
Request. Although this air supply method is not violent, and the temperature rises quickly, it will take away the indoor moisture, reduce the indoor humidity, and make people feel dry mouth and sore throat, which is what everyone often calls "air conditioning disease."
-
The air source heat pump is composed of four parts: outdoor host (air source heat pump), terminal equipment (indoor heat exchange, refrigeration system), transmission and distribution system, and control system, which can meet the needs of heating and cooling.
An air source heat pump is a device that converts low-level heat energy into high-level heat energy, and only requires a small amount of electricity to maintain the operation of the differential or equipment. When heating, the combined power supply system transfers the heat from the outdoor air to the interior; When it comes to cooling, the combined power supply system transfers heat from the room to the outside. Hot and cold water is provided through the outdoor main engine, which is delivered to the room by the water supply pipe system, and the water and air are exchanged at the end of the room to adjust the temperature. Qing Zen.
Energy saving and environmental protection! The underground pipe of the ground source heat pump is equivalent to the cooling tower of the air conditioner, and the water circulation only depends on the ground source circulation pump. Because the temperature of dozens of meters underground is constant all year round and can be maintained at about 18 degrees, it can meet the load of the unit regardless of winter or summer, and can save about 70% energy compared with other refrigeration equipment.
Air source heat pump: To put it simply, the air source heat pump is to use a small amount of electric energy to process the outdoor air, and transport the comfortable temperature that meets our needs to the room, in this process, the air source heat pump consumes electrical energy to do two work, that is, to make the outdoor air temperature reach the required temperature, heat up or cool down, which is the work of outdoor air, and the other is to transport cold and hot energy to the room, which is the work of handling. The air source heat pump is affected by external natural factors, when the outdoor ambient temperature is very high, it is difficult to discharge the indoor hot air, the cooling effect in the room is poor, and when the outdoor temperature is very low in winter, there will be frost phenomenon in heating. >>>More
With the arrival of winter, it is the season of the year for ground source heat pump floor heating maintenance services; An important part of floor heating maintenance is the cleaning and maintenance of floor heating pipelines; The purpose of cleaning and maintenance of floor heating pipes is to make the water flow of floor heating pipes smoother and achieve the best heating effect; After the floor heating pipe is used for a period of time, there will be scale adhering to the pipe wall, which will affect the heat dissipation effect. The first reason is that the water contains minerals, calcium, magnesium ions, etc., which are easy to form dirt and adhere to the pipe wall; The second is microorganisms, microorganisms in the water will produce some flocculents, with the increase of water temperature, the flocculent increases and attaches to the wall of the pipe that does not scale, forming biological slime, which will cause pipeline embolism and affect the heating effect. Each way of the floor heating pipeline should be repeatedly flushed, if necessary, add appropriate cleaning agent, sewage from the sewage outlet of the water collector, and inject special protective agent for the pipeline after cleaning, effectively avoid scaling and microbial breeding, and protect the pipeline and pipe fittings; The technical content of ground source heat pump is high, and the specific technical details and technical problems can be consulted by a professional company such as "Zhurong Environment".
1. Performance characteristics of ground source heat pumps, installation and maintenance requirements of internal machines and pipelines. >>>More
1.The heat pump unit was put into trial operation on a stand-alone basis. >>>More