There is no running water in rural areas, can gas water heaters be installed?

The construction of the new countryside has narrowed the gap between the cities and the rural areas, the living standards in the rural areas have also improved, and the household appliances in the cities have also become rapidly popularized in the rural areas. The question of the subject is whether gas water heaters can be installed in rural areas.

Let's analyze the conditions of use of gas water heaters and how to improve them.

How a gas water heater worksIt is the cold water that enters the water heater, and the water-gas linkage valve body senses the water flow pressure to push the water-gas linkage valve and turn on the power supplyMicroswitchesTurn on the power to start the pulse igniter, open the gas input solenoid valve at the same time to input the gas, and the igniter ignition combustion water heater starts to workHere it can be seen that there are three conditions that need to be met for the gas water heater to work:Electricity, ventilation and water。At present, the rural areas are generally connected to electricity, and the construction of new villages is also connected to gas and running water.

The subject's situation is that there is no running water in the countryside, so how do you need to install a gas water heater?

1. The use of water diversion in the mountains

The countryside will use the mountainMountain spring water(The form of installing water pipes to lead water to the home), this mountain spring water to the household does not have a certain pressure, can not directly trigger the gas water heater water-gas linkage valve body, which will lead to the gas water heater can not be ignited normally.

【Solution】You can install a large-capacity stainless steel water tower in front of the house or behind the house or on the roof, and then add water to the water towerBooster pumpsIn the form of increasing the pressure of the inlet water of the gas water heater (the pressure range is generally in kilograms), then the gas water heater can be directly installed and used under the conditions of electricity, ventilation and water (water pressure is sufficient).

2. The use of well water in the yard

In some areas, there is a shortage of mountain spring water or for other reasons, and residents will dig a well for their own water to solve the problem of drinking and use, and the well water is directly pumped out of the ground by manual pressure or water pump. The gas water heater needs to be fed through the pipeline, and directly supplying the water pump to the water heater will cause the water pressure to be too high and the water heater is easily damaged.

【Solution】The well water can be pumped out and stored in a large water tank, and a small power self-priming water pump can be connected to ensure that the water pressure of the water supply is within the water pressure range of the water heater, so that the water pressure of the gas water heater can work normally, and the gas water heater can also have the highest efficiency and the longest life.

Summary. In rural areas, if there is no running water, it is possible to install a gas water heater, and we need to meet the installation conditions of the gas water heater, and the water source, power supply and gas source are all in line with the standards.

Gas water heaters can be installed, but you need to install some regular products, and the installation tools must be stricter.

No, because the use of gas water heaters requires a certain amount of water pressure, and without water pressure, the gas valve cannot be opened.

It can be installed, but the water is more troublesome, you can get a large water tank in the countryside, and it will be okay to add water to it from time to time, which solves the problem of tap water.

If there is no running water, make a water tank on the roof, paint the outside of the tank black, and foam the bread outside to prevent freezing in winter. The water tank is filled with a water pump, and the electric water heater must be installed using a matching special hook and expansion pipe or expansion bolt.

The installation is horizontal, firm, beautiful, and must be installed on the load-bearing wall.

, otherwise there are safety hazards.

If it is impossible to accurately judge whether it is a load-bearing wall, a bracket should be installed under the water heater to support the treatment, and the socket that supplies power to the electric water heater should comply with the use of a safe independent fixed three-pole socket (no movable socket is allowed), and the socket should match the plug of the electric water heater. It must be filled with water before it can be powered on.

It can be installed by adding a booster pump to the roof or a water storage tank at a high level.

Installation of water heaters:

Household multi-functional water heaters are usually installed on the kitchen balcony, and the air outlet is connected to the kitchen through the air duct, so that the cold air blown out can directly enter the kitchen to achieve the effect of refrigeration. When installing, you only need to link the hot and cold water outlet with the finger pulse hot and cold water reserved by the house, and you can use it when you connect it, and the installation is very simple.

If there is no running water, then the water pressure can be improved by pressurization, which is equivalent to having running water.

Booster pump, as the name suggests, is a pump used for pressurization, and its main uses are water heater pressurization, high-rise building low Weixiang water pressure, sauna, bath and other pressurization, pressurization of the top layer of the apartment, solar automatic pressurization, reverse osmosis water purifier pressurization, etc.

<> can be installed with a water heater that uses electricity, but you need to pay attention to the following points in the sail:

Electric water heaters need to be connected to a power source, so they need to have a steady stream of electricity**.

In the absence of running water, consider using a pump to pump up groundwater or well water, and then filter and disinfect it before use. However, it is necessary to pay attention to water quality issues and ensure that the water quality meets health standards.

When installing a water heater, you need to follow the relevant safety regulations, especially when it comes to disposing of wires and water pipes, and it is necessary to find a professional to install it.

In short, if there is no running water, using an electric water heater requires some additional precautions, and you need to choose a suitable method according to the actual situation.

As long as you have a well at home, you can, materials: a submersible pump, a roof water storage tower can buy plastic, which is cheaper than stainless steel but not durable, an electric water heater, and a water pressure switch.

Add an extra water storage tank, higher than the water heater, if it doesn't work, put the water storage tank at a low place, and connect a small booster pump.

Electric water heater, you have to run water, you can dig a well, that's how I got it, it's very good, and the cost is not big.

There should be a well at home! Let's inquire about it, you can install tap water!! ...My uncle's house is connected to the water pipe of his own well.

The so-called tap water is, to put it bluntly, water with pressure and meets the basic sanitary requirements.

There is no running water, that is, the water is not pressurized, correspondingly, as long as the non-pressure water heater is used. There are two types of water heaters that can be considered by the landlord:

One is the solar water heater, directly choose the one with an opening at the top, and it is convenient to add water.

The second is that it is a simple electric water heater, which can be installed in the bathroom, pay attention to the one with a leakage protector, and it is best to cut off the power supply when taking a bath.

Both types of water heaters are non-pressurized, and in order to prevent the water temperature from getting too high, a separate cold water container needs to be installed at a height not lower than the water heater. Even though there is no running water, both hot and cold water must be used when bathing, hehe.

Water heaters all require tap water. You can't install your own.

I recommend a method to you.

Install a small water tower or pool on the roof of the building, and be sure to close the ring. Connect a pipe from the bottom of it, and go to the bottom to use it as tap water. Fill it with your own pick.

If the water source is close to your home, it will be much easier to install a small water pump. It's good to pump when the water pressure is not enough.

Storing water at high altitudes. Just let the water pressure be high enough.

No, the water heater needs a water pipe.

It's very convenient to repair the pool.

Summary. If you don't have natural gas in rural areas, you can buy electric water heaters, or buy solar water heaters, which don't need natural gas.

How to use water heaters in rural areas without natural gas.

Hello, I'm glad to answer for you, I know the customer service staff. At present, I have provided consulting services for more than 10,000 people, I am good at answering legal knowledge and traffic information inquiries, and the answers to your questions are as follows: there is no natural gas in rural areas to buy electric water heaters, or to buy solar water heaters, these water heaters do not need natural gas.

If you don't have natural gas in rural areas, you can buy electric water heaters, or buy solar water heaters, which don't need natural gas.

Rural areas are more suitable for installing solar water heaters, air energy water heaters or storage electric water heaters. Compared with these three water heaters, solar water heaters are more suitable, firstly, solar water heaters save electricity, and secondly, there are sufficient installation conditions in rural areas; Air energy water heaters also save electricity, but the cost is on the high side; Storage electric water heaters are more convenient to use but consume a lot of electricity.

In many rural areas, electricity is unstable, and it is not recommended to use electric water heaters, and I personally think that solar energy is more suitable. Of course, I also use an electric water heater at home, but if you use electricity, I recommend using solar energy, and several friends use it well. Hope it can help you.

Summary. In rural areas, there is no natural gas that can be installed with electric heating water heaters. Cylindrical electric heating water heaters are environmentally friendly and convenient, but they need to be burned for a while before they can be washed, and the capacity is limited, so there are too many people to use it.

How to use water heaters in rural areas without natural gas.

Hello dear There is no natural gas in the countryside and you can use electric water heaters.

In rural areas, there is no natural gas that can be installed with electric heating water heaters. Cylindrical electric heating water heaters are environmentally friendly and convenient, but they need to be burned for a while before they can be washed, and the capacity is limited, so there are too many people to use it.

There is an instantaneous electric water heater, boiling water will produce hot water, and it is necessary to pay attention to electricity safety when using it. It is also good to install a solar water heater on the roof, which is energy-saving and environmentally friendly, and there is hot water when there is sun.

Or you can directly install a solar water heater or an electric energy water heater, which is very convenient. Now the solar water heaters are dual-purpose, there is hot water in good weather, which saves electricity and money, and can be plugged in and heated in bad weather, and the heating time is a little slow in winter.

The electric water heater is much more convenient, there is hot water 24 hours a day all year round, that is, the electricity is a little more wasteful than solar energy, a little is that there is hot water at any time, no need to wait.

Summary. It is recommended to use a solar water heater here. Because the water heater does not use electricity, and the temperature can pass through hot and cold water. Swap to achieve temperature control. Tianneng water heater recommends Muge for all seasons, because of the quality.

Good. It is recommended to use a solar water heater here. Because the limb shirt is too hot to heat the limb disc, it does not require electricity, and the temperature can pass through hot and cold water. Swap to achieve temperature control. Tianneng water heater pushes the hunger cavity to recommend the four seasons Muge, because of the quality.

In addition to the solar water heater is the electric water heater, the only disadvantage of the electric water heater is that there will be scale in it after a long time, and it is very troublesome to clean up.

Would you rather be electric or solar? It's up to you to choose it, dear

I would like to ask about electric and gas water heaters.

Because the electric heating needs to wait.

Electric heating can be set to a constant temperature.

But it costs electricity. <>

Is it okay to have gas.

Gas is also available.

Temperature regulation is more precise than solar and electricity.

1. What are the advantages and disadvantages of gas water heaters 1. Benefits: First of all, the gas water heater is ready to use and does not need to store water, so it will not occupy a space area, and secondly, the gas water heater only needs to plan the road potato to take the line, which is suitable regardless of the size of the space, and finally the energy consumption of the gas water heater is relatively low. 2. Bad sensitivity:

The requirements for the installation position are very high, it cannot be a confined space, it must have a good ventilation environment, and when it is installed, it is also necessary to punch holes in the wall to affect the aesthetics.

Is there a recommended model for electric heating? There are 4-6 people in my family.

There are a lot of us who buy Haier 60 liters, and we have to choose a larger capacity.

Haier Liquid Tong Quiet (Haier) Peace of Mind Bath 60 liters electric water heater fast heating large water volume King Kong seamless gall healthy slag water quality monitoring WiFi one round of segment-level energy efficiency EC6001-PD3 (U1).

60 or 80 liters.

Oh, how about AO Smith's?

Smith is also very good, but the after-sales service is not as good as Haier.

Smith is mostly clean water.

You can install an electric water heater without running water.

As long as you have a well in your house, you can add an extra water storage tank, higher than the water heater, if not, put a water storage tank in a low place and connect a small booster pump.

Booster pump, as the name suggests, is a pump used for pressurization, and its main uses are water heater pressurization, low water pressure in high-rise buildings, sauna and bathing, pressurization of insufficient water pressure on the top floor of the apartment, solar automatic pressurization, reverse osmosis water purifier pressurization, etc.

In the case of installing water heaters in rural areas, when there is no running water, it must be equipped with a self-priming pump, and if the conditions are good, it would be good to add a water tower. In this way, both solar energy and electric water heaters can be installed.

The working principle of a self-priming pump is that the casing is filled with water (or the casing itself contains water) before the pump is started. After starting, the high-speed rotation of the impeller makes the water in the impeller channel flow to the vortex shell, and then the inlet forms a vacuum, so that the water inlet backstop door is opened, and the air in the suction pipe enters the pump, and reaches the outer edge through the impeller channel.

The self-priming pump is a self-priming centrifugal pump, which has the advantages of compact structure, convenient operation, stable operation, easy maintenance, high efficiency, long life, and strong self-priming ability. There is no need to install a foot valve in the pipeline, and only need to ensure that the pump body is stored with quantitative fluid extraction before working. Self-priming pumps of different materials can be used for different liquids.

If there is no running water, the water can be pumped with a water pump and then concentrated in a closed tank, so that the water pressure can be supplied to the solar bath.

In general, you can't use a water heater without running water. If you really want to use it, you can only build a small water tower yourself, and then install a booster pump.