Many people like to keep fish at home and drive the fish tank pump all year round, is it really good

<> it is good to have the fish tank pump open all year round, because under normal circumstances, the circulating pump of the fish tank needs to be turned on all the time so that it can provide enough oxygen for 24 hours. However, turning off the circulating pump of the fish tank can easily lead to a lack of oxygen in the fish tank, and the fish may die after a long time. Nowadays, there are many people who can raise fish, and there must be the right way to raise fish.

A circulating pump needs to be installed, and the water in the tank needs to be changed regularly. There are serious bacteria in it, which will also affect the growth environment of the fish. Fish tanks also need to be filtered, and daily maintenance is still very important.

Pay attention to feeding times. Feeding is generally available about two hours before sunset.

Many fish lovers like to install a fish tank circulation pump in their fish tank at home. This fish tank circulating pump is actually equivalent to a filtration system, which can directly absorb the fish feces, microorganisms and leftover feed in the fish tank to ensure that the water quality of the fish tank is clear. But the cost of the fish tank circulation pump is not low.

In addition to the ** of the circulating pump itself, its power consumption is also a large expense. In order to save electricity, some fish lovers often turn off the circulating pump in the fish tank. It is recommended that you never try this, as the circulating pump of the fish tank needs to be left on all the time.

If the power is cut off frequently, it is likely to lead to the death of the fish.

If there is too little water in the fish tank, the pump will not run smoothly and the temperature will be too high. The pump contains a lot of light, but if there are too many impurities, all the nozzles will be blocked, and the water will not flow smoothly. When the water pump is usually used, it is also necessary to pay attention to maintenance.

If the dirt in the pump is not cleaned regularly, it cannot be used for a long time. When installing a water pump, there are many details that need to be paid attention to. For example, you need to prepare a long sponge strip to wrap behind some equipment, this is to better adsorb.

When installing the water inlet, it should be perpendicular to the water outlet, and in addition to the water inlet, it also has the function of ventilation. After installation, it's best to adjust it to see if it works. Then install the air duct.

Once installed, plug in the power supply and see if the airway can get water out.

Many people like to keep fish at home and drive the fish tank pump all year round, is it really good to do so? Why?

The filter in the fish tank is open 24 hours a day, and the water quality may not be clean. Now you want to turn the filter off for 3 hours a day, and to tell you the truth, it doesn't work. If the filter is stopped for 3 hours, all the nitrifying bacteria in the fish tank may die, and the dead nitrifying bacteria will become a source of pollution and destroy the water quality.

Secondly, when the filter is working, the circulating oxygen enhancement and filtration three-in-one, the flowing water body can bring a large amount of oxygen. If the filter is left on for 3 hours, there is a risk that the oxygen in the tank will be depleted by the aquarium fish.

Ornamental fish can not survive normally in the fish tank that has exhausted oxygen, the final result is that the ornamental fish floats to the surface of the water to breathe, and the ornamental fish floating on the surface of the water also needs to consume physical strength, once the ornamental fish floats for a long time, the physical strength will sink to the bottom of the tank and suffocate to death. By the time you want to open the filter again, it's too late, and the whole tank of ornamental fish is dead, some are sinking to the bottom of the water, some are floating on the water, and the silence is miserable. I said it is more scary, but this is the truth, if you don't believe it, you can give it a try, especially in the summer high temperature season, the filter is stopped for an hour, and your fish will be fully reimbursed.

The pump of the fish tank can choose the inverter water pump or the AC and DC intelligent inverter water pump, which can control the enhancement and weakening of the water circulation flow of the whole fish tank and the energy saving of the electrical equipment of the fish tank.

If the pump stops, you will basically say goodbye to your beloved fish when the fish tank density is high for 3 hours without water circulation! In the case of a small density and a large tank, the fish may still be able to hold on.

Once there was a power outage in my fish room for an afternoon, fortunately, the density of the fish tank was not large, and I escaped by luck, but the state of the fish was much worse! But after a few days it got better!

If you think about energy saving! You can choose the inverter water pump, so that you can control the flow of the entire fish tank well!

This practice is very bad, open the fish tank for a long time, the water temperature in the pump fish tank will rise, which is not conducive to the growth and development of the fish, and it is easy to lead to the death of the fish.

Seeing that everyone is talking about nitrifying bacteria with relish, it is like being obsessed, and the wise are always in the minority, if you defend them, they will definitely use the theories they searched for or the group they saw in the book to attack them as fast as possible, let's get down to business! Limited to a few people to reference, 80 of the bottom filter fish tank for three years six butterfly koi grew up, the first to buy seven a month to die one, until now the water is clear and translucent fish state is particularly good, the statement is not used filter material, let alone oxygenation, on a minimum flow of water circulation, below a magic bag two filter cotton, water evaporation on the addition of water for half a month for one-third of the water, feeding now an average of two or three fish look, so that feeding is not fat or thin, sparse feeding must be the king of the road less feeding is the way of raising, Probably like this, I haven't seen a sick ** This kind of veterinarian is super done, just like driving, the car is not broken, how can you fix it!.

This is good for the fish, as there can be plenty of oxygen, which is good for the growth of the fish.

This is not particularly good and can be very expensive. The reason for this is that this behavior will lead to an increase in household expenses, and it will also cause the fish to have too much oxygen, which may lead to the death of the fish.

When raising fish at home, the water pump is turned on all year round, which can change the fish tank, which can make the oxygen in the fish tank more sufficient, which can provide a better living environment for the fish.

Turning on the water pump to filter my opinion must be good, running water does not rot to reduce the rancid smell in the fish tank water, reduce the mortality of fish and the breeding of mosquitoes. The water is clear and the fish leaps into beauty.

If you raise goldfish at home, you should raise a little less, a pair is enough. 40-50 cm fish tank, do not need to change the water every day, feed less fish food.

The most basic things in an aquarium are filters and pumps. If there is less than one, it is likely to be a dead fish, and there is no way to grow normally. So we need to see if the aquarium's pump needs to be turned on within 24 hours.

It can be closed at night if it is not necessary. This way we can save on our electricity bill. In addition, the water pump in the fish tank needs to be turned on 24 hours a day, what are the options for aquarium pumps.

Does the pump in the fish tank need to be turned on within 24 hours?

The aquarium's filter pump must be turned on continuously for 24 hours. It cannot be turned off, especially at night, which will cause the aquarium to be anaerobic. Filter pumps are designed to work continuously.

If a dive bomb is used, the head of the bomb must be immersed in water, there can be no shortage of water, and the filter material cannot be cleaned frequently. If you wash it too often once a week, it is not conducive to bacterial growth. Solid waste can be significantly reduced.

Wipe the filter with half an hour by changing the water to take a half-chan filter material and put it in the water extracted from the tank to rinse gently. Never wash, let alone wash with tap water, otherwise, bacteria will be removed and filtration efficiency will be reduced.

Aquarium Water Pump Selection:

1. Fish tank size: mainly the amount of water in the whole cylinder. Submersible pumps.

The flow rate is usually circulating water from the entire 7-10 cylinders per hour.

2. Size of filter box: because the larger the volume of the filter box, the more filter material can be added, the larger the extended filtration area of the filter material, and the larger the global filtration area; At the same time, this means that the huge filter box can support the passage of a larger flow of water.

3. Density of fish: the more fish, the more fish you eat, the more feces you produce, and the greater the flow of purified water; At the same time, many little white fish friends found that the stool could not be pumped, which was caused by the low power of the pump and the insufficient pumping capacity.

4. The size of the fish is sometimes one of the factors that affect the choice of water pump. The gravity of the TEM pump has little effect on medium and large fish; They are mostly small fish ('u8804；In still water and freshly hatched loaches. Due to their low swimming capacity, they are easily absorbed by the strong currents of the pump.

In addition to the above-mentioned factors, these factors also need to be considered.

5. Regarding the relationship between the pump and the cylinder size, the size of the filter box, and the density of the fish, we take the relationship between the human room and the air conditioner as an example: in a house with an area of 15 square meters, if you live alone, less than 1p of air conditioning is enough. If there are five or more people in the meeting, you will obviously feel hot and you may need a 5p air conditioner.

If it is a large fish tank, you need to turn on the pump for 24 hours, otherwise the fish will die easily, so it is best to turn on the pump for 24 hours and do not use electricity.

I think no matter how big the fish tank at home is, then it needs to be turned on 24 hours a day, because her oxygen is not enough for the fish to breathe, so let's leave it on!

No, you can turn it on once in a while, if you turn on the pump often, it will consume a lot of electricity, and it is not necessary to do so.

Need. If you don't turn on the pump, the fish will easily die, so you need to turn on the pump 24 hours a day.

There are several types of pumps used in fish tanks, and different pumps have different functions. In general, it can be divided into two categories: in-cylinder pumps and out-of-cylinder pumps.

One is a pump that powers the water circulation. The purpose of this pump is to pump water from the fish tank into the filter tank, and this pump is usually installed at the bottom of the tank. As shown in the figure below:

The second is a three-in-one pump integrating water circulation power, oxygenation and filtration. This kind of pump is generally installed on the side of the cylinder and has a certain filtration function, but the effect is not very good. As shown below:

The third is the wave pump. The main function is to create a vortex in the water, so that the water comes alive, so that some dirt will not stay in one place for a long time. Breaking the oil film on the surface of the water through the flow of water also has a certain aerating effect. This is generally installed on the side wall of the cylinder.

1. Make the water flow to increase the contact surface between water and air, increase dissolved oxygen and increase the oxygen content in the water.

2. Filter the pumped water and put it back into the fish tank to keep the water clean and transparent. The fish tank does not need to be changed frequently.

There are 4 points to pay attention to when using a water pump.

1.Before using the water pump, it is necessary to check whether the rated voltage of the pump is the same as the actual used voltage.

2.When installing or removing and cleaning the pump, unplug it and cut off the power supply to ensure your safety.

3.If the pump has been dropped or seriously collided, check whether the pump is broken as a whole and stop using it immediately if it is broken.

4.Be sure to check the power cord so as not to cause leakage and affect the safety of use.

The third is the wave pump. The main function is to create a vortex in the water, so that the water comes alive, so that some dirt will not stay in one place for a long time. Breaking the oil film on the surface of the water through the flow of water also has a certain aerating effect. This is generally installed on the side wall of the cylinder.

One is the oxygenation pump. This is installed outside the tank and connected to the sand head by a hose, which is placed in the water inside the tank.

The second is the water pump for the bottom filtration system. This is similar to the first type of in-cylinder pump. It is only installed in the bottom filter tank, not in the fish tank.

The third is the electric pump for water exchange. It is used to extract the dirt at the bottom of the tank and change the water.

Large fish tanks are often equipped with wave pumps, what are the benefits of raising ornamental fish?

<> "Many owners have fish farming at home, and the equipment is relatively complete, but if you are a novice, you may not know many aspects, such as the fish tank pump should be turned on all the time?

1. Should the fish tank pump be turned on all the time?

Need. Because the main purpose of the pump in the fish tank is to provide oxygen to the fish, it needs to be turned on for a long time without interruption, so that there is enough oxygen in the water to ensure the survival of the fish. In addition, after the fish tank pump is turned on, it can enhance the water circulation, make the water come alive, and provide a more suitable living environment for the fish.

2. What should be paid attention to when using a fish tank water pump?

1. Because the water pump is an electronic product and is used in water, and the water is conductive, it is necessary to pay attention to the safety of electricity when using it. Before use, the power supply of the pump should be checked, if it is found that there is a broken line, it can not be used, if it is found to be damaged during use, it is necessary to disconnect the power supply immediately to avoid electric shock.

2. During the operation of the water pump, the oxygen supply is completed through the rotor and water blades, so in order to ensure sufficient supply, the rotor and water blades need to be cleaned regularly during the use process. Especially when the water quality is relatively hard, it is easy to scale in the water, and the situation is serious, which will directly affect the operation of the pump.

3. In the process of use, if you need to clean the water pump, then you need to disconnect the power supply of the water pump first, then settle the fish, and then clean the water pump and fish tank, so as to ensure the safety of the cleaning people and fish at the same time. In addition, in the process of cleaning and washing, it is necessary to check whether the filter cotton and other equipment are in good condition, so as not to affect the filtration effect.

In order for the fish to survive in conditions with more adequate oxygen, it is used to pump oxygen.

Water Pump: A water pump is a machine that transports or pressurizes a liquid. It transmits the mechanical energy or other external energy of the prime mover to the liquid, so that the liquid energy increases, and is mainly used to transport liquids including water, oil, acid and alkali, emulsion, suspension emulsion and liquid metal, etc., and can also transport liquids, gas mixtures and liquids containing suspended solids.

The technical parameters of pump performance include flow, suction lift, head, shaft power, water power, efficiency, etc.; According to different working principles, it can be divided into volumetric water pumps, vane pumps and other types. Positive displacement pumps use changes in the volume of their studios to transfer energy; Vane pumps use the interaction between rotary vanes and water to transfer energy, and there are types of centrifugal pumps, axial flow pumps and mixed-flow pumps.