Too many pull machines? There is too much garbage, how to clean it up

If there is too much junk and it is in the software, you can clean it up by cleaning the software that buffers the junk.

In fact, there is too much garbage, these are very normal, because most people are throwing garbage, so if there is too much garbage, you will sort it out, so that the garbage will slowly and slowly decrease, and there is a lot of garbage that can be **.

If there are too many machines, this means that something will cause you a trouble, and then you can clean it up.

There is too much junk, you can delete a little, you can clean up the junk on your phone or computer, and it will speed up.

If I think there's too much garbage, you can unload some of it or throw it away.

There are too many, then you should find a way to clean up in time and get rid of all the garbage, so that everything will be fine, and you won't gamble like that anymore, it's normal.

It is true that there is too much garbage, and we can clean up some software that is not commonly used in time.

There is too much garbage, if there is too much garbage, clean it up in time. If you don't clean it up in time, the network speed is too slow.

Too much garbage, right? You can be a psychic guru and get rid of the garbage, or you can change this to a memory card, but that's not what kind of hand can change the memory card? But well, if you can, just swap the memory card.

There is too much junk on your computer, you can use that cleaner software to clean up the junk or delete some unnecessary software.

There is too much garbage, you should pay attention to clean up, don't let yourself be in the sea of garbage, it will be unhealthy, unhygienic, clean up more, it will help health

If there is too much garbage, you can clean it up yourself or ask someone else to clean it up.

There's too much garbage, there's too much garbage, it needs to be cleaned up, and if I don't clean it up, it will affect the speed.

I just checked for you, if there are too many you can sell to someone else.

There is too much garbage, I think of course there is too much garbage, so each of us must save resources to be able to protect our earth, and I think it is also good to use it reasonably if there is too much garbage.

Well, there's too much garbage, this one isn't very normal, and now there's too much garbage in the world.

If there is too much garbage, I suggest that you can dispose of it, because if there is too much garbage, it will accumulate all the time, and you may insult the environment and pollute the environment.

Tractors are indeed becoming less and less, and generally combine harvesters or multi-purpose and tractors are used much less.

Ah, there are too many chickens. If there is too much g, you can dispose of the garbage, generally according to his.

There's a lot of garbage, and you should go find someone who cleans up the garbage, uh, clean it up.

There is too much garbage, do you squeeze the machine or squeeze? Well, this thing has to be divided into a lot Yes, I also think this is so, there is too much garbage.

There's too much garbage, there's too much garbage, a mobile phone or a computer. Clean it up!

I'll ask this question, you said that there is too much garbage, is it that there is too much garbage on the mobile phone, and the card is no longer out of the picture or the word.

Then you need to clean up the garbage of your mobile phone in time.

When you stand at a different height, and then look at the people below, you will naturally feel that there is too much garbage, but if you look up, you will find that you are still excellent people.

If you have too much junk on your phone, you can clean it up. Because the general mobile phone will produce garbage after a period of time, and then we need to clean it up manually.

When you use software to clean up garbage, sometimes you can't clean up the garbage, and the cleaning is not thorough. So the best way is to restore the phone to factory settings, or double clean the phone, format and clean the phone cache. Android machines generally have a 2-year lifespan, and after 2 years, the system is stuck, and the battery is not resistant!

It's as simple as using a mobile phone manager or something like that, or linking to a computer and using computer software to clean it up directly, and if it's complicated, you'll have to come one by one.

Because there are fewer people picking up garbage! Ordinary people come across garbage, or kick away or bypass it, so the garbage is more garbage, in fact, more care, garbage will pick up! If today because someone else offended you, you try to take revenge, hurt or scold to vent, so what difference do you have from the person you scolded?

Do a good deed every day, raise your hands, pass on the good to others and bring others to do good together! I wish you happiness and less trouble.

China's national conditions are many people, so there are many waste garbage that has been used, ** has made great efforts to garbage but can not be completely solved, environmental protection is everyone's, so we must start from the bottom, try not to use disposable things, we must do garbage classification, in order to get waste utilization, start from me.

Garbage is really a big problem now.

Usually, you have to start from yourself, start from small things, don't litter, and do a good job of sorting.

The most important thing is to produce as little waste as possible, and to use less disposable things.

You can find Hulk Energy**to**ah, they**will reuse it in the future, it won't pollute the environment, it's pretty good.

In fact, this kind of thing can be done in garbage classification.

You teleport to Rado from the merchant camp next to the water monster, and then you can go to Lado and don't talk to the old man.

It seems that it will be transmitted to a basement, and there is a rejuvenating pill in it, and it has not been played for many years, so it is probably like this.

I don't think it's probably too much oil. Instead, the oil has deteriorated a little and its viscosity has increased, sticking to the oil scale.

The oil scale is to measure whether the oil is normal, there is an upper dead center on the scale, and a lower dead center, if it is higher than the top dead center, it means that you have more oil, if it is lower than the bottom dead center, it means that your oil is less. In addition, to check the engine oil, check it after cooling down or turning off the engine for 5 minutes, first pull out the oil dipstick and wipe it with paper or cloth.

My understanding is that when reading data, the slave controls the bus, so the SDA must be released (i.e., pulled up) in advance. Otherwise, the slave will not be able to change the bus. When SDA is set to 1, the master controls SCL=1, and then the slave chooses to set the SDA to 1 or 0 according to the data it wants to send (i.e., when SCL=1, the slave changes the SDA).

When sending data, the host controls the bus, and when SCL=0, the SDA is changed by the host; When SCL=1, SDA does not change and is read by the slave. (When scl=0, the host changes SDA).

When answering, it is equivalent to reading a bit of data, and the same is when SCL=1, the SDA is changed by the slave.

At the beginning and end, the SDA is controlled by the host. At SCL of 1, any change in SDA will be treated as a start, stop signal.

Personal understanding, if there is any mistake, please advise!

Of course, PS can also be understood as when reading is still at scl=0, the slave changes sda, but it does not affect the logic, how easy it is to understand.

Before reading the bytes, instead of fixing the port bit high, the release is to turn off the lower MOG tube inside the microcontroller, so that the level of the SDA line is determined by the signal.

Whenever you change from a write operation to a read operation, that is, from an output operation to an input operation, you need to write "1" to the port first to cut off the FET before you can read the input data normally.

Usual application, a port, is only responsible for a single function, not input, is output, in the bus application, a port, time-sharing multiplexing, one will input, one will output, so, when changing, to write 1

Or, if you don't write 1, then the first byte received, on the same line, is equivalent to a line and bar. If it's 0, then the first byte, something went wrong. So, it can only be 1

When scl=1, the data can be read only when the data is stable. A change from 0 to 1 indicates the start of a clock and the start of reading data.

Guo Tianxiang's program is to detect the change of the level on the SDA when the SCL is the level of the site, and then store it in a variable, and send a data to be read out when the next falling edge arrives, and the cycle is eight times.

The operation of the I2C bus can refer to the I2C bus protocol, and I will not say much about it here. As for the first sentence above, it is very unspecific, I2C is two buses to transmit data, and SDA and SCL must work together to complete the transmission.

You can first remember the drive letter of the partition prepared by the current mechanical game, create a new partition in the solid state and copy the game files into it, delete the partition mechanically, and change the drive letter to the original one.