The drainage system in the bathroom always does not drain quickly, what is the solution?

1.Because the toilet drains slowly, the pipes can become clogged. So the solution is to use a sewer unclogant, which has a good effect on clogging caused by hair, greasy, paper towels, etc.

And it can be used to unclog the blockage of wash basins, washbasins, floor drains, toilets, etc. The laying slope of the drainage pipe can be appropriately increased, and the small slope of the original pipe laying is also a reason for the slow drainage. Go to the roof of the building to check whether the top ventilation of the drain pipe is smooth.

If the ventilation of the top of the drain pipe is blocked, it will also affect the drainage capacity of the pipe, resulting in slow drainage.

2.You can go to the market and buy a pitot tube to make a toilet, aim it at the sewer, knock hard, and under the action of suction, the toilet can also be opened; You can use the handle of the floor at home, aim it at the sewer mouth, and then put half a pool of water. With suction and pressure, the toilet can also be opened.

Sewer unclogging agent: has a good effect on clogging caused by hair, greasy, paper towels, etc. It is used to unblock the blockage of wash basins, washbasins, floor drains, toilets, etc.

As the most important part of drainage, don't underestimate small floor drains. The style of the floor drain is also one of the main factors that directly affect the drainage. Shallow water seal floor drain is an ancient style, the same principle as ordinary water seal floor drain.

3.Due to the shallow water seal, it is particularly prone to dryness, odor, bacterial growth and clogging, so it has been eliminated from the market. Flipping floor drain, a cover plate uses the principle of gravity of water, which can be opened when there is water and closed when there is no water.

Although it has a beautiful appearance, it is particularly prone to trapped dirt, causing blockage, and the launch speed is also directly affected. Waterless floor drains are the fastest under direct vision and are not easy to clog, but there is no lid, and odor is the biggest disadvantage, so it will not be used in family bathrooms. The floor drain is an important interface between the drainage pipe system and the indoor floor.

4.As an important part of a residential drainage system, its performance directly affects indoor air quality, and controlling odors in restrooms is crucial. The reason for the odor of the floor drain may be that the height of the floor drain water seal is not enough, and the water in the trap dries quickly, resulting in the odor overflow in the drain pipe.

At this time, a return elbow can be added at the floor drain, or the floor drain of the same specification can be replaced. If no one is home for a long time, it is best to seal the floor drain with a lid.

Check to see if there is a malfunction in the drainage system, or if there is some garbage clogged in it, causing the drainage to be slow, spray some dredging agent, baking soda, pour some vinegar in it, and do a clean inside.

You can choose to check whether your bathroom drainage system is blocked or damaged, you can choose to find an item that swallows water or toilet to unclog the sewer, you can choose to replace the water pipe, or you can choose to ask the relevant personnel to solve the problem and replace your drainage system.

Renovation workers can unclog sewers, replace water pipes, inspect drainage systems, change the way floor drains leak, and replace sewer pipes.

In such a situation, the drainage system must be changed in time, and then the problem of floor drain should be dealt with, and the dredging work should be carried out so that the drainage can be carried out quickly, and then the blocked places should also be dredged.

For smaller basements, there are only about one or two toilets, and the pressure of drainage is not large, so you can use a sewage lifter to drain the water. However, if the villa has a two-story basement, the area is relatively large, and according to the living area decoration, the bedroom and bathroom are complete, plus the nanny room gym and the like, there must be more than one or two bathrooms, at this time, the ordinary sewage lifter can still ensure the ability to drain water?

In fact, this kind of large drainage is a bit difficult for traditional sewage lifters, because they all use the S3 motor working system, which is an intermittent working system, and the machine cannot drain continuously, and the machine may burn out. Therefore, the traditional machine can only install a few more machines to ensure that the displacement of each machine is within the rated range.

However, Zhiliu's intelligent sewage lifter has been improved, and the S1 motor working system has been adopted, and the machine can work continuously for drainage. If the vertical distance between the water points in the two-story basement is small, a large pump can be used to solve the drainage of several toilets, and there is no need to worry about the machine being overloaded. If the water is far away, just add a small pump.

It is used for drainage in several bathrooms in the basement, and it is also necessary to pay attention to prevent the occurrence of leakage. The smart sewage lifter does a better job in this regard, it comes with an automatic alarm device. When the water pipe leaks, the controller will automatically close the water inlet valve after detecting it, and then send this message to the owner's mobile phone.

As soon as the inlet valve is closed, the loss is prevented, and the owner can be notified to go home as soon as possible to deal with it. The traditional sewage lifter does not have these important functions, and the basement leakage can only be treated after the owner finds it in the basement, and the loss at this time is generally relatively large.

Regardless of the large or small drainage in the basement, the intelligent sewage lifter can cope with it calmly and can do many things that traditional sewage lifters can't do.

Every time you take a bath, you have a sense of déjà vu that the water is flooding the gold mountain? It must be that the dry and wet separation of your bathroom is not done well. The most important thing in decoration is the bathroom, especially to pay attention to the separation of dry and wet.

One of the basic aspects of wet and dry separation is to install a water retaining strip on the outside of the shower. The water retaining strip is simply a strip-shaped object that effectively divides the shower area from the dry area and plays a role in retaining water. Doing a good job of waterproof strips can prevent water from overflowing in the wet area to the dry area, keep the dry area environment dry and clean, and it can be said that it is more practical than the threshold stone!

I believe that in many families, the space of the bathroom is not very large, and it is a little difficult to do dry and wet separation, but if you don't do it, the bath floor is full of water. For families who do not do dry and wet separation when decorating, a simple installation of a water retaining strip can play a good role in the follow-up, let's take a look at the specific operation method.

1. Conditions for installing waterproof strips: First of all, there needs to be floor drains inside and outside the water strips, if there is only one floor drain, it cannot be installed.

2. Choose the shape of the waterproof strip: the water retaining strip has an L-shaped and arc-shaped, and the small room can give priority to the arc-shaped, which is also more beautiful, and the shower curtain is installed on it, and it is easy to pull.

In addition, the water retaining strip is also divided into skirt shape and plane shape, it is best to choose the skirt shape, the water retention effect will be better.

3. Marking the line: first put the water retaining strip on the bathroom floor for trial installation, draw the line on the ground, and wipe it off, and at the same time need to pay attention to the floor drain inside and outside the water retaining strip.

4. After drawing the line, start to play glass glue: you also need to pay attention to the use of mildew-proof glass glue.

It is best to wipe the floor clean before hitting the glass glue, so that there is no moisture.

5. After laying the glass glue, put the water retaining strip on it for gluing. Since it was the first time, this glass glue was a bit unsatisfactory.

6. Wait for the glass glue to dry, and then use a utility knife to scrape off the excess glass glue, after scraping, it will not be so ugly.

7. Then there is the installation of the shower curtain rod, the shower curtain rod is bought without punching, and the curved shower curtain rod is also selected, which can be installed according to the following diagram.

8. After installing the shower curtain rod, start to install the shower curtain, which is just right after installation.

It's best to lower the height of the shower curtain than the height of the water retaining strip so that the water doesn't spill out so easily.

9. Completion. After the decoration, the small bathroom can be regarded as having the function of separating dry and wet, and then the mood is also a lot better.

The above are the installation steps of the bathroom water retaining strip, you can try it and install it yourself.

Poor drainage of toilet sewer pipes is a common household drainage problem, and there can be many reasons for it, here are some possible causes:

1.Clogged pipes: A large amount of paper scraps, grease, food scraps, hair, and other debris accumulate in the sewer pipes, resulting in poor drainage. This problem can be cleaned up with a sewer drain or a professional pipe cleaning tool.

2.Aging pipes: If your drain pipes are old and have been in use for many years, they may be damaged, broken, or deformed, which can lead to poor drainage.

In this case, it is necessary to contact a professional plumbing repair company to inspect and repair the pipeline.

3.Improper inclination: Pipes can also lead to poor drainage if they are not installed correctly. Especially when installing toilets, it is necessary to pay attention to the drainage slope of the toilet must meet the requirements, otherwise there will be problems of poor drainage.

4.Plumbing design issues: In some newly built buildings, there may be some problems with the design of the pipes, such as too small pipe diameter, too many bends, etc., which will lead to poor drainage. In this case, the piping design and modification need to be redone.

5.External factors: Some external factors may also cause poor drainage pipes, such as clogged urban sewer pipes, low water pressure, environmental pollution, etc.

In conclusion, there can be many reasons for poor drainage of toilet sewer pipes, and the way to solve the problem varies from case to case. If you can't solve it yourself, it is recommended to contact a professional pipe cleaning or repair company to deal with it.

Poor toilet drainage is a very common problem. To solve this problem, we need to start from the following aspects:

1.Clean up the blockage.

If the cause of poor drainage is because of blockages, then we can use some chemical dissolving agents to clean up, such as drain dryers, toilet cleaners, etc. If the chemical solvent is not effective, then a long rod cleaner or a hydraulic cleaner can be used to clean it.

2.Replace the drain pipe.

If the blockage is very serious and none of the above methods are effective, then it means that the problem of the drainage pipe is more serious. At this time, we need to replace the drain pipe to ensure that the drainage is smooth.

3.Adjust the slope of the drainage.

If the drain pipe is not visibly clogged, but only poorly drained, then it is possible that the slope of the drain is not suitable. At this time, we need to adjust the drainage slope to meet the standard to ensure smooth drainage.

4.Install the pressurization device.

In some special cases, such as when the water source is not strong enough or the residents are using underground drainage pipes, we can install a pressurization device to lift the high drainage capacity of the bucket shed. This method requires the installation of a professional technician.

To sum up, in view of the problem of poor drainage of the toilet, we need to first check whether there is a problem with the empty blockage and drainage pipe, clean or replace it if necessary, and adjust the drainage slope to ensure smooth drainage.

The daily problem that all families will encounter, the sanitation room is called hygiene, in fact, the most unsanitary place, we not only have to clean it neatly and cleanly, but also pay attention to its drainage.

Toilet drainage method:

1.After the installation of the water pipe, the pressurization test must be carried out: the pressurization test is generally carried out under the condition of double water pressure, and there should be no water leakage in the test.

2.A simple implicit test method in the absence of pressurization, but it is not entirely feasible.

3.Water pipe direction: It is recommended that the water pipe go to the top is the safest.

The main reason is that most of the waterway reconstruction is done by dark pipes, and the characteristic of water is that water flows to a lower place. If the pipeline goes underground, it is difficult to find the leakage in time once it occurs, and the leakage will only be found if the water overflows or the floor is deformed and leaks downstairs, and it is difficult to find the leakage because the water pipe is buried in the dark. At this time, the huge loss is irreparable, and even seriously affects the friendly neighborly relationship; If the water pipes go to the top, it may be more expensive to change the water, but as a long-term investment, it is worth it.

Even if the water pipe goes to the top, even if the water leaks, it can be found in time, which is convenient for maintenance and the loss is small.

How to clean the bathroom drain pipe? Teach you a trick:

If it is due to the blockage caused by the hair left in the bath, it can only be dredged from the floor drain, and the hand-cranked spiral wire is pushed down from the floor drain while shaking until it feels that there is a foreign body, and then pull it out while shaking, and the blocked hair and other objects will be screwed on the spiral wire, and the pipe dredging problem will be solved.

This method is more suitable for the dredging of bathroom sewer pipes, and it is more convenient to use.