The Honor 30S fell into the water, when will it be turned on when it is fished out?

You continue to blow with a blow pipe, don't turn on the machine first, put it on for about four or five days and then turn it on, if it really doesn't work, you can only take it to see if it can be repaired. I repair mobile phones, generally do not need to repair, stay up for a few days the phone can be turned on, but in order to survive, of course, I will not tell customers that the mobile phone is not repaired.

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

Extend. The Honor 30S phone is very good, and the parameters are as follows:

1. Screen: The screen size is inches, and the screen color is 16.7 million colors, making it more comfortable to watch movies.

2. Camera: rear quad camera 64 million pixels + 8 million pixels + 8 million pixels + 2 million pixels, support autofocus. The front is 16 million pixels and supports fixed focal length.

3. Performance: Magic UI is based on Android 10) system, equipped with Huawei Kirin 820 (Kirin 820), octa-core processor, bringing high-speed and smooth experience.

4. Battery: Equipped with 4000mAh (typical value) large-capacity battery, which can last for a long time.

Be sure to dry it, blow dry it, and don't rush to use it.

What do we do when we drop our phone in the water?

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1.Turn off the power as soon as possible.

2.Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

3.Put it under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not rush to use strong heat sources such as hair dryers. Blow it and it's over.

After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure.

1.Shake it dry, but don't shake it off.

2.If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

3.If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

If you have poor hands-on ability, you should still repair it for a professional).

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not.

1.Turn off the power as soon as possible.

2.If you fall into a corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3.Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4.Rinse with alcohol or professional washing water.

5.Assembling. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.

This depends on when you fell into the water and fished out, if it is fished out immediately, you can start it in half a day or a day to try it, if it is too long, I think it is better to go directly to the repair shop for repair, because it is possible that due to your switch machine, it is very likely that the damage to the internal parts will be caused.

It is recommended to place the phone in a dry and ventilated place as much as possible and use a paper towel to blot the water stains on the surface of the phone. After infusion, turn off the phone and remove the SIM card and memory card. Then bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance, if you continue to use it or repair it at an unofficial service store, it may further damage the internal components.

You can check the nearest service center address on Huawei's official website. If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Precautions after water and liquid ingress in the mobile phone:

Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so it is recommended to keep the phone turned off.

The first step: power off the mobile phone, many mobile phones will turn on automatic protection after detecting that the mobile phone is water, directly shut down and then prevent the mobile phone from short circuiting, at this time if you find that the mobile phone has been turned off, don't panic to test whether the mobile phone can be used, don't turn on the next step directly, if you find that the mobile phone can still be used normally, that is, there is no power outage, then don't be happy, you still need to power off the mobile phone, because if you don't power off in time, it may form a short circuit on the motherboard, As long as the motherboard is short-circuited, then your mobile phone really has to go to the repair shop.

Step 2: Remove all external devices, including SIM card slots, data cables, headphones, phone cases, etc., this is to prevent the current at the interface from causing secondary damage, and also to prevent things like the phone case from making the evaporation area of the mobile phone larger, because if the evaporated area becomes larger, this water ingress is particularly difficult to handle.

Step 3: Deal with the problem of water ingress into the mobile phone, find a direction that can drain the water out, and shake the mobile phone hard, this step needs to control the strength, the water in the small mobile phone can not be thrown out, if the strength is too large, the mobile phone may be thrown out, and then you will not only have to repair the mobile phone into the water, but also may repair the mobile phone screen, the back of the mobile phone and so on. The most important thing to pay attention to is to clean the water in the screen, if the screen leaves water droplets, it will also leave traces after drying, affecting our visual experience, for some corners of the water, we can use cotton swabs or paper towels and the like, do not use a hot hair dryer, many users may feel that the speed of using a hair dryer to dry is faster, but the hot hair dryer may bring the risk of glue melting, but the cold hair dryer can try it.

Step 4: Stand the phone to let the water evaporate, if the previous step has not seen obvious water droplets, the phone will be left to stand for more than 24 hours, do not be anxious to test whether the phone can be used, otherwise the above steps are completely in vain, if you can still see a significant small amount of water vapor, we can use rice or desiccant and so on to assist in the operation of water. Wait until 24 hours later, we can try to turn on the phone, under normal circumstances, the phone can still be turned on normally, if it can't be turned on, congratulations you may have a chance to change the phone, of course, you can still go to repair.

It may not happen to you very often if your phone falls into the water, but if this happens, how can we save our love device in time?

1. What is the first thing to do after the phone falls into the water? Of course, the phone is fished out of the water, this matter is very important, the longer the phone is soaked in water, the greater the damage to the phone's earpiece, buttons, screen and motherboard, so the phone should be fished out of the water as soon as it falls into the water.

2. After the mobile phone is fished out of the water, first wipe the water stains on the surface with a paper towel, but don't turn it on, don't turn it on, don't turn it on, say important things a few times, many friends will first see if the phone can be turned on, this practice is extremely wrong, because the water is not cleaned up, and the motherboard will be burned if the power is connected again, so don't turn it on.

3. The first thing we have to do after the mobile phone is fished out is to take out the battery first, regardless of whether the mobile phone is turned on or off before entering the water, the battery should be removed immediately, but now many mobile phones are all-in-one machines, it is difficult to take out non-professional personnel, if you have no experience, do not easily disassemble the phone, to avoid secondary damage.

4. The water in the mobile phone is almost shaken off, don't be in a hurry to turn it on, use a hair dryer to maintain the temperature that is not hot, blow on the place where the mobile phone has holes, decide the number and time of blowing according to the degree of water entry, and then start to dry it.

5. The drying treatment of mobile phones generally uses desiccant and drying box, most families may not have these things, but there will also be small bags of desiccant in the snacks we usually buy, and we can usually collect some in case of emergency.

6. The dried mobile phone can be turned on, if it still can't be turned on at this time, you need to go to the repair shop to ask for help. If your phone can be turned on, don't be too happy, you should check the buttons of the phone, whether all functions can be used normally.

7. If you buy a telecom mobile phone replacement guarantee service after the mobile phone is flooded, you can pay a small amount of replacement fee in exchange for a new mobile phone of the same model, but at present, the telecom mobile phone replacement service is only for Guangxi and Anhui, and friends in other regions can find similar services.

After the phone falls into the water, it needs to be thoroughly dried before it can be turned on.

Step 1: Turn off the power.

After the mobile phone falls into the water, it will automatically power off protection, that is, it will automatically shut down, at this time, do not rush to turn on, it is easy to short-circuit and burn the chip and other components on the motherboard. If the phone does not turn off automatically, it means that the motherboard is not deeply watered and the protection is not touched. However, the water is fluid, so quickly shut it down manually to ensure that nothing goes wrong.

Step 2: Rinse dry.

First of all, determine whether the liquid dropped into the phone is corrosive. If you just drop it into clean water, just throw out the moisture in the phone, this step is only applicable to phones with removable back cover and replaceable battery. Open the back cover of the phone, take out the battery, SIM card, and memory card, with the screen facing the palm, and then shake the phone with appropriate force, and use centrifugal force to shake out the water.

You can also try using a cotton swab to absorb excess moisture from the headphone jack and small slits. If you don't have a cotton swab, you can wipe it with a pen tip or toothpick wrapped in a cotton cloth. For mobile phones that cannot remove the back cover and cannot replace the battery, such as the Apple series, it is best to go to a professional repairer for testing and processing as soon as possible after completing the shutdown operation.

If the phone falls into corrosive liquid (such as seawater, toilet, etc.), don't be afraid of getting dirty, immediately open the back cover, remove the battery, immediately rinse the phone with clean water, or immerse the machine in clean water and try to dilute the corrosive liquid inside, this step is very important, because the corrosive liquid may corrode the main board of the mobile phone and cause the phone to be paralyzed, and then carry out the spinning step.

Step 3: Dry your phone.

Once the moisture is thrown out, the hair dryer is ready to go. Be careful when using a hair dryer to dry, and the location of the blowing is mainly in the open part, such as near the battery compartment, headphone jack, earpiece, etc. It is important to keep the hair dryer at a distance from the phone, and never use hot air to avoid damage to the delicate parts inside the phone.

Your phone is ready to use.

This is estimated to wait for the water to dry in a few days, or find a professional mobile phone repair place to help you take a look.

In order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after the liquid is ingested to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures (including microwave heating) after liquid infusion, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after liquid ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.