How to maintain the limited temperature of the Kelon 5 HP air conditioner?

If the temperature of the air conditioner of Kelon 5 hp is limited, it means that its port thermostat has been affected, and you need to reset it.

Kelon 5 HP air conditioner is limited in temperature, if you want to repair it, first take a look at whether your remote control is easy to use, select the temperature adjustment in the settings of the remote control, and you can choose different modes to see if the temperature can be changed.

Kelon 5p air conditioner is limited in temperature, why hasn't it been repaired? This must account for more electrical maintenance personnel to solve these noise problems.

It is best to find a professional air conditioner maintenance personnel to repair this air conditioner.

Hello, the limit of 25 degrees Celsius is the setting of the system, which is designed according to the characteristics of the air conditioner in the computer room. There is no need for maintenance, if there is a need to lower the temperature, you need to enter the advanced settings of the system, which only the manufacturer knows the password to enter.

Kelon's air conditioner, if the temperature is limited, it is very simple to contact the after-sales service for maintenance.

How to repair the Kelon five-skin air conditioner with a limited temperature? Do you first determine which line the temperature is, or is it? Which switch? There is no calendar number, and there is no debugging.

If I'm not mistaken, it seems to be able to operate on the fuselage, if it's hanging, you need a remote control to adjust, and if it's a smart air conditioner, it's easy to get.

The temperature of the Kelon five-horse air conditioner is fixed by his thermostat.

He was told by the temperature that he could not find an after-sales person to go for a night.

Maybe I don't have the air conditioner to be limited to the temperature of how to repair the suggestion, so I still have to find a professional maintenance team to repair it to see if it is still within the warranty period.

After the temperature of the Kelon five-horse air conditioner is limited, the temperature sensor head can be changed for maintenance.

If your device is subject to temperature limits, you can turn the limits off today.

I have never used this kind of air conditioner, you can read the product manual, or call the manufacturer's customer service, or ask a professional repair shop master. You can know the temperature that is limited.

Kelon air conditioner 5 hp failure 11 how to remove the air conditioner long-term operation under the lack of Freon. The solution is to supplement the air conditioner with fluorine. The power supply is not connected or out of power, the power supply is not well connected, the power supply is not well connected, or the power supply wire diameter is thin or aging, and the power supply voltage is low, which will also make the compressor unable to start, and it is recommended to install a voltage regulator at home.

Also check the power leadway. Long-term compressor working at high temperature is also easy to lead to compressor start-up failure. Contact Kelon after-sales personnel for on-site testing.

Hello Kiss is happy to answer this question for you. 1. First of all, you can send an imitation number to send a cleaning command to the air conditioner through the remote control of the air conditioner, so that the cleaning net inside the air conditioner can be cleaned. 2. It can be operated by the emergency button to achieve clean reset.

3. In the state of the air conditioner cleaning prompt, press the hardware button once to restore the original function of the air conditioner. 4. After exiting the cleaning prompt, the air conditioner can return to normal display and can operate normally. 5. If there is a problem that cannot be solved by the individual, you can contact the professional Taizheng for door-to-door maintenance.

It is also possible to contact the manufacturer for replacement without human damage. Kelon air conditioning is Hisense's young air conditioning brand. Since its establishment in 1984, Kelon Air Conditioning has always been at the forefront of the development of China's energy-saving air conditioning industry, and has broken the domestic energy efficiency record three times, the world energy efficiency record three times, and launched the 10th generation of double high-efficiency air conditioners.

In 2019, Kelon was positioned as a professional and practical brand.

Hello, fault phenomenon: Prompt 11 fault generation Li Shi touched the code, and the air conditioner did not refrigerate and did not work. The cause of the failure is the original hail

The air conditioner compressor fails to start or runs out of step. Solution: 1. The air conditioner is operated under the shortage of Freon for a long time.

The solution is to supplement the air conditioner with freon. 2. The power supply is not connected well or there is no power, the power conductor socket is not in good contact, or the power conductor is thin or aging, and the power supply voltage is low, which will also make the compressor unable to start, so it is recommended to install a voltage regulator at home. In addition, it is necessary to check whether the power supply wire is aged and repair or replace it in time.

3. Long-term working of the compressor at high temperature is also easy to lead to compressor start-up failure. 4. Contact Kelon after-sales personnel for door-to-door testing, Kelon official certification is the only after-sales service in the country**: 4oo-1172-315.

Summary. Hello, pro-air conditioning failure 11**4 solutions and 11 fault causes explained:

Fault phenomenon: Prompt 11 fault**, the air conditioner does not refrigerate and does not work.

Cause of failure: The air conditioner compressor fails to start or runs out of step.

Solution: 1. The air conditioner is operated under the shortage of Freon for a long time. The solution is to supplement the air conditioner with freon.

2. The power supply is not connected or out of power, the power conductor socket is not in good contact, or the power conductor wire diameter is thin or aging, and the power supply voltage is low, which will also make the compressor unable to start, so it is recommended to install a voltage regulator at home. In addition, it is necessary to check whether the power supply wire is aged and repair or replace it in time.

3. Long-term working of the compressor at high temperature is also easy to lead to compressor start-up failure.

Hello, I have seen your problem, and I am sorting out the answer, please wait for a while Hello, pro-air conditioning failure 11**4 solutions and 11 fault causes Explanation: Fault phenomenon: Prompt 11 so resist the obstacle**, the air conditioner does not refrigerate and does not work.

Cause of failure: The air-conditioning compressor fails to start or the operation of the air conditioner is out of step. Workaround:

1. The air conditioner is operated under the lack of freon for a long time. The solution is to supplement the air conditioner with freon. 2. The power supply is not connected well or the power supply is not connected, the power conductor socket is not in good contact, or the power conductor wire diameter is thin or aging, and the power supply voltage is low, which will also make the compressor unable to start, and it is recommended to install a voltage regulator at home.

In addition, it is necessary to check whether the power supply wire is aged and repair or replace it in time. 3. Long-term working of the compressor at high temperature is also easy to lead to compressor start-up failure.

Summary. Kelon inverter air conditioner does not display the set temperature.

Hello dear, there is no display when the thermostat is powered on.

After the power supply of the air conditioner is turned on, but the thermostat is not displayed, you need to check whether the terminal of the air conditioner temperature controller is connected to the neutral live wire to ensure that the neutral live power supply is normal. Then it is to see whether the cable between the LCD motherboard and the driving power supply is loose. The temperature controller with a power switch should put the switch on "off" or "1", and check the power supply voltage of the wiring before looking at the air conditioner temperature controller.

After checking, you will know that there is a fault, and you can take corresponding measures to solve it.

The air conditioner's thermostat shows that there is a deviation in temperature.

If the temperature of the air conditioner cannot be controlled, it is necessary to look at the indoor temperature control, and sometimes there is a large deviation, so it needs to be corrected, re-measured, and set to the ideal temperature.

Hello, I have seen your question and am sorting out the answer, please wait for a while Kelon inverter air conditioner air conditioner does not display the set temperature, hello dear, the thermostat is powered on and there is no display. After the power supply of the air conditioner is turned on, but the thermostat is not displayed, it is necessary to check whether the terminal of the air conditioner temperature controller is connected to the neutral live wire to ensure that the neutral live power supply is normal. Then it is to see whether the cable between the LCD motherboard and the driving power supply is loose.

The temperature controller with a power switch should put the switch on "off" or "1", and check the power supply voltage of the wiring before looking at the air conditioner temperature controller. After the inspection, it is known that the lack of pin is faulty, and corresponding measures can be taken to solve it. The air conditioner's thermostat shows that there is a deviation in temperature.

If the temperature of the air conditioner cannot be controlled, it is necessary to look at the indoor temperature control, and sometimes there is a large deviation from the dreckage, so it needs to be corrected and set to the ideal temperature after re-measurement. Hope it helps.

1. Generally speaking, the heating effect of the air conditioner is not good, partly due to too much dust accumulation in the air filter and the blockage of the air vent of the internal and external units by foreign objects. The function of the filter is to adsorb the dust in the air, if the accumulated dust is too much and not cleaned in time, the air circulation will be blocked, resulting in a decrease in the air outlet volume, so that the heat in the machine can not be brought out by the active air in time, resulting in insufficient heat production, this is not a fault, it belongs to the maintenance of the air conditioner, just take off the air filter regularly to clean, it can be restored to normal. 2. Fluoride deficiency.

At present, most of my friends use heat pump type or heat pump plus auxiliary electric heating type air conditioner. The working principle of these two air conditioners is that when the freon evaporates, it absorbs heat from the outside air, and when the outdoor temperature is low, the temperature difference with the evaporation temperature of the freon is smaller, and the heat exchange effect becomes worse, and the hot air is less. Therefore, if it is an old model, the service life is longer, the wear of the compressor is larger, and when the outdoor temperature is below 0, the heating effect of the air conditioner is difficult to satisfy.

In addition, if the nut at the copper pipe horn is not tightened during the installation of the air conditioner in your home, or the machine has been moved, it can be considered as a lack of fluorine.

There are many reasons for not starting, and the possible cause is the phenomenon of the compressor protection device tripping.

Compressor overload protection will trip, indicating that the system is too high-pressure, the pressure is too high, or the overheating current is too high.

Causes and elimination of high pressure and overheating:

1. Too much refrigerant. Reduce the refrigeration dose appropriately.

2. Poor heat dissipation. Check the condenser pipe for dirt and dirt and clean the condenser.

3. The jujube limb pipeline system is blocked. Refer to the pressure gauge to judge, eliminate, and re-process systematically.

4. Dust and fouling of the evaporator or filter screen. The airflow becomes smaller, the system pressure and temperature are unstable, and the evaporator or filter is cleaned.

5. Fluoride deficiency is also possible. When there is a lack of fluorine, the compressor discharge temperature will overheat, causing the overheating load protection switch to trip.

The electrical problem is:

1. Control circuit board rock transportation failure.

2. The temperature sensor is overloaded and the information is wrong.

3. The power supply wiring is loose and the contact is poor. Gear beams.

4. The starting capacitor or compressor starting coil is burned out.

The information is insufficient, it can only be analyzed in this way, and there are many other possibilities, it is recommended to find a professional maintenance personnel to check it.

Hope it can help you, satisfied. Thank you.