How to clean suede shoes, how to deal with mildew spots in suede shoes

1. Add one part laundry detergent to one part warm water.

2. Use a toothbrush dipped in laundry detergent and carefully brush the surface of your shoes. Be careful not to soak your shoes in warm water when brushing, and try not to dip your shoes in too much warm water.

3. After brushing, put it in a cool and ventilated place to dry until it is dry, and then stuff newspaper in the shoes and store it.

For the shoe mold spot, you can use a soft cloth dipped in alcohol and water (1:1) solution to wipe it, and then put it in a ventilated place to dry.

Or dry it in the sun first, and then dry brush it with a brush, if there are still dotted marks, only wash it with some laundry detergent, and brush it in the same direction before washing it. In the future, you should pay attention to taking it out to dry from time to time.

If you accidentally get wet or damp in the rain: use a shelf similar to the shape of leather shoes or stuff it into a crumpled soft object, place it in a ventilated and cool place to dry it slowly, and then apply shoe polish to regain the shine before collecting, never leave it in the sun.

October 18, 2011 - During the rainy season, the air humidity and temperature are high, and leather shoes are most prone to mold. White spots with short villi appear in the initial stage, which is light mold; It develops into pale green mold flowers, and finally yellow-green fluff.

On rainy days, when the shoes are drenched with rainwater, the dirt is removed first, the water in the shoes is sucked out, and then the desiccant (if not, you can replace it with cardboard) is stuffed into the shoes, put it in a ventilated and cool place to dry, and after half an hour, change the desiccant. Dry and coat with raw chicken.

Leather shoes mildew removal method: when the leather shoes are moldy for a long time, they can be wiped with a soft cloth dipped in alcohol and water (1:1) solution, and finally with sodium bisulfite solution.

The treatment method for long hair and mold of leather shoes is:

1. Wipe with alcohol and waterIf the leather shoes are moldy, the alcohol is dissolved 1:1 with water, wiped with a soft cloth dipped in the solution, and then placed in a cool and ventilated place to dry.

2. Rinsing is called white vinegarWhite shoes are moldy and can easily leave yellow spots, clean the shoes, add a small amount of white vinegar when rinsing, soak for half an hour, and paste a layer of white paper towel on the surface of the shoes when drying, so that the treated shoes will be as white as new.

3. Soapy water cleaning:It is the easiest way to wash moldy shoes with soapy water, put a layer of soapy water on the brush, and then gently scrub the moldy place of the shoes, scrub them clean and put them in a cool and ventilated place, remember not to expose them to the sun.

4. Wax wiping:Shake the wax evenly and pour it on a cloth or paper towel, and gently wipe it directly on the shoes with mold spots to effectively remove the mold spots on the shoes.

The methods of long-term storage of leather shoes are:

1. Moisture-proof leather shoes:When you change your shoes for storage, remember to wipe off the stains and store them in a dry place after drying, so as not to let them be squeezed by other objects. You can put a little moisture-proof agent in your shoebox or inside your shoes (a moisture-proof bag in everyday food is also fine).

2. Anti-mildew of leather shoes:The leather shoes must be dried and some mothballs must be placed inside the shoes to prevent insects. A ventilated place should be chosen for storage and preservation, and attention should be paid to dust prevention.

Take it out regularly and wipe your shoe polish, or wipe it with a walrus leather shoe care hand mask, which can effectively prevent mold growth.

Especially in the mildew rainy season, it is necessary to take it out to blow a blow, such as the mildew spots should be removed with a soft cloth brush, and the shoe polish should be replenished in time.

3. Prevent the deformation of leather shoesThe worn leather shoes are more or less already deformed, and it is a good time to repair the deformation when they are replaced.

1. Prepare a transparent glue.

2. Pull the tape apart.

3. Wrap the scotch tape around your fingers, paying attention to the sticky side facing outward, and the section that is close to your fingers is not sticky.

Fourth, wrap a few more circles and cut it with scissors.

Sixth, then press the fingers on the moldy part of the shoes, you can stick the mold down, to put the shoes in a dry storage, otherwise in a humid environment, it is easy to breed mold.

1. Wash with soapy water: Wash moldy shoes with a brush dipped in soapy water, and then place them in a cool and ventilated place to dry, and never expose them to the sun.

2. Wipe with alcohol and water: If the shoes are moldy, you can wipe them with a soft cloth dipped in alcohol and water (1:1) solution.

3. Rub with mung bean sprouts: You can use the white stem of mung bean sprouts to rub the moldy part of the leather shoes, and then rinse with water.

4. Wipe with water wax: Shake the water wax evenly and pour some on a cloth or toilet paper (not too much), and wipe directly on the spot where the shoes have mildew.

5. Soak in soapy water: If the shoes are seriously moldy, you can soak the shoes in soapy water for ten minutes, and then gently scrub them with a brush. However, it is not recommended to soak the shoes completely, as it is easy to deform the shoes.

6. Scrub with a damp cloth: first dry the leather shoes thoroughly, and then use a damp cloth, such as a wrung out towel, gently wipe off the salt frost (gray-white powder), and wait for the salt frost to disappear, dry the leather shoes, then wipe them with a damp cloth again, and carefully wipe the shoe polish after a little drying.

What should I do if the mold spots on leather shoes can't be brushed off?

Start by drying your shoes thoroughly and then dry them in a cool and ventilated place at home to prevent more moisture and moldy shoes. Wipe the mold with a dry cloth to wipe off the gray-green and other colors. Gently wipe off the salt frost with a damp cloth (e.g., a wrung out towel).

After the salt frost is gone, let the shoes dry. Repeatedly use thick, hot soapy water (do not use soap that contains bleaching ingredients or enzymes, as this will cause the cotton fabric to fade) to remove it.

For nubuck shoes, first gently scrub the entire shoe with a large shoe brush to see if the protruding parts of the nubuck shoe are contaminated with dirt and mold, and then clean these dirty parts. Then use a soft brush moistened with detergent to slowly clean the surface of the matte shoes. Be careful not to force yourself.

Nubuck cowhide will turn white due to discoloration. Be especially careful when brushing your shoes.

How to remove mildew spots on white leather shoes1

How to remove mildew spots on white leather shoes.

If the shoes are moldy, you should first take a clean cotton cloth to remove the mold, you can use a soft cloth dipped in alcohol and water (1:1) solution to wipe it, and then pour the shoe maintenance oil on another piece of clean cotton cloth, rub the cotton cloth to evenly distribute the shoe polish on the cotton cloth, and then quickly wipe the upper with a cotton cloth. Finally, let it dry in a ventilated place.

If the shoes are whitish, salty or hairy due to other reasons such as dampness or excessive foot sweat, you can use a light soft cloth dipped in vinegar to gently wipe them before applying shoe paste of the same color to dry.

Water wax can form a hard protective film on the surface of the car body, which has super waterproofing, acid rain, pollution and UV protection. Shake the wax evenly, then pour it over a clean cloth or toilet paper (not too much) and rub it directly on the moldy spots on your shoes.