Corolla 17 facelift 1 2t how to install Led strip light

It's quite difficult to install it yourself. It is recommended to go to a larger car modification shop to modify, recommend a software, Tuhu, you can find a more reliable shop above, hope, thanks to Lao Tie!

LED original factory, about thousands of oceans, Ningbo Cheluoxuan lamp upgrade center.

It's all pretty good. Mom and Dad give us a different look in this world, which proves that you are unique. And there are no ugly people in the world.

It's okay to see it. Perfect, what a cruel word? It's better to enjoy life and be confident, you are the best-looking.

It's all pretty good. Mom and Dad give us a different look in this world, which proves that you are unique. And there are no ugly people in the world.

It's okay to see it. Perfect, what a cruel word? It's better to enjoy life and be confident, you are the best-looking.

It's all pretty good. Mom and Dad give us a different look in this world, which proves that you are unique. And there are no ugly people in the world.

It's okay to see it. Perfect, what a cruel word? It's better to enjoy life and be confident, you are the best-looking.

The eye is an organ that can perceive light. The simplest eye structures can detect the light and darkness of the surrounding environment, and the more complex eye structures can provide vision. Compound eyes are commonly found in arthropods (e.g., insects) and usually have many simple small ocular faces, and produce an image that is not as many as is commonly imagined).

The eyeball wall is mainly divided into three layers: outer, middle, and inner. The outer layer is made up of the cornea and sclera. In many vertebrates and some mollusks, the eye imprints light by projecting light onto the light-sensitive retina, where light is received and converted into signals that are transmitted to the brain through the optic nerve.

Usually the eye is spherical, filled with a clear, gel-like substance, with a lens for focusing, and usually an iris that controls how much light enters the eye.

"Strange Tales from Liaozhai" is the result of Pu's life's hard work. The author has been engaged in collecting and writing materials since he was a young man, as his close friend Tang Mengyi said in the preface: "In the spare time of the art industry, everything I see and hear is a note-taker."

Because the author draws a wide range of materials, "the same people from all over the world send each other by postbox, so things are gathered well, and the benefits are accumulated." Judging from the time of the storyline recorded in the manuscript (the latest time is "Xia Xue" and "Hua Nan" in the 46th year of Kangxi of the Qing Dynasty, Pu Shi was 67 years old at the time) and the analysis of the revision of the manuscript (except for a few chapters and entries, most of the rest are neatly transcribed), it is the last revised manuscript of the author in his later years. Therefore the sacrificial texts made by his sons such as Pu Ji said:

In his twilight years, he wrote "Strange Tales from Liaozhai". "Liao Zhai Zhi Wei" except for the first line of the "Kao Cheng Huang" chapter marked "Liao Zhai Zhi Wei one volume", the rest of the volumes and pages have no volume, due to the previous reloading of the manuscript and the ancient habit of making volumes, resulting in the number of the volume is quite confusing, such as Pu Lide in the preface called 16 volumes, Pu Zhen and other "Sacrifice Father Wen" and Zhang Yuan's "tomb table" are called eight volumes. Pu Ji, Pu Lide and others are his children and grandchildren, and they have lived together for a period of time, they should be very familiar with the writing of their predecessors, and they have also witnessed and preserved this manuscript for a long time, why is there such a difference in the number of volumes of the original manuscript?

This can only be understood from the original and modified manuscripts, as well as the customary formulation of volumes in ancient China. Therefore, in order to respect the actual situation of the author and the original manuscript, it is more appropriate to say that this book is "not divided into volumes".

Toyota Corolla LED headlight assembly is about 1500 yuan, and the LED headlight bulb only needs more than 200. The price of the LED headlight 4S store of Corolla Shuangqing is 3000 yuan. If you change the headlight to white light, you need to change the lampshade.

The lamp group particles also decide, it is recommended to choose the genuine factory modification, because many cottage quality is not ***, easy to bring hidden dangers to the vehicle.

Introduce. LED headlights are energy-saving, and the cold light source has low luminous heat generation: the energy consumption of LED elements is only 1 20 of halogen lamps for the same daytime running lights in cars. Extremely long life.

At present, the LED components used in automobiles can basically reach the level of 50,000 hours, and the well-known automotive lighting manufacturers have been able to provide LED components with a life span of 100,000 hours. The LED components have a simple structure, very good impact resistance and shock resistance, are not easy to break, and can adapt well to various environments.

Daytime running lights LED is generally produced by the factory price between 200-400, the lamp group particles also decide, it is recommended to choose the genuine modification, because many cottage quality is not ***, easy to bring hidden dangers to the vehicle. Does changing the light refer to changing the hernia lamp, the lampshade does not need to be replaced, but it needs to be disassembled and installed, and it is unsafe to simply modify the bulb and the irradiation light diverges View the original post

Pacific Automobile Network] According to the bayonet position of the original car lights, the LED lights are placed in the correct direction. After installing the lights correctly, cover the ballast. There are 2 wire ports on the ballast, one is connected to the power supply on the xenon lamp, and the other is connected to the power supply of the original car.

4. After the wire buckle is connected, cover the stabilizer and dust cover, and then fix it with an iron hoop, and the installation is successful.

There are two main ways to modify Corolla LED headlights, one is to replace the headlight assembly, ** at about 3000, and the other is to replace the bulb, the ** LED headlight bulb is about 500 yuan, but if the owner is not a professional, it is recommended to go to a professional 4S shop to replace, so as not to replace the vehicle with unnecessary damage. LED headlight modification In order to avoid being burned by the components in the engine compartment when replacing the bulb, we need to confirm that the vehicle has been turned off and is in a cool state, so let's introduce the tutorial of changing the Corolla LED headlights.

1. Remove the low beam dust cover: Before modifying, Corolla owners need to know the position of their model's low beam and high beam. In general, the low beams are on the outside, while the high beams are on the inside.

The dust cover of the Corolla is soft rubber, which is not difficult to remove, and can be broken off with a little force.

2. Disassemble the spring fixing clip: After breaking the dust cover, we can vaguely see the internal structure. After loosening the U-shaped spring rental clip, the original car lights can be easily removed.

3. When installing, place the LED lights in the correct direction according to the bayonet position of the original car lights. After installing the lights correctly, cover the ballast. There are 2 wire ports on the ballast, one is connected to the power supply on the xenon lamp, and the other is connected to the power supply of the original car.

4. After the wire buckle is connected, cover the stabilizer and dust cover, and then fix it with an iron hoop, and the installation is successful. After the replacement is completed, Lao Xun needs to adjust the position of the lights.

At this point, the Corolla can not be on the road, and the installed LED lights must be adjusted and tested first. The normal height of the low beam should be located near the upper edge of the tire in front of the vehicle. If you find that your car's low beam is too high above the front wheel eyebrow, it means that the low beam is too high and can interfere with the driver's view of the car in front.

First open the engine compartment cover, find the lamp holder of the headlight in the engine compartment near the width indicator light, turn the lamp holder counterclockwise, and then remove the bulb. The Corolla uses halogen bulbs, and the Corolla Twin Engine uses LED bulbs.

Toyota Corolla to change the headlight bulb replacement: first open the engine compartment cover, find the lamp holder of the headlight in the engine compartment near the width indicator light, turn the lamp holder counterclockwise, and then remove the bulb. The Corolla uses halogen bulbs, and the Corolla Twin Engine uses LED bulbs.

Halogen headlamps are a new generation of incandescent lamps, tungsten lamps filled with halogen elements such as bromine iodine or halides. After being energized, the electric energy heats the tungsten filament to an incandescent state to emit light, and the electrical energy is converted into heat energy, and then into light energy. It has the characteristics of high temperature, poor durability and low brightness.

19 Corolla halogen headlights can be changed to LED lights, the original car halogen bulb waiter is equipped with the car when it leaves the factory, generally 55VW, the advantage of LED headlights is high brightness, very stable performance, almost no light decay, no delay.

1. The COB light source is not suitable for halogen headlights, and many car lamp products on the market now use the COB light source packaged by several low-power light-emitting chips, because its luminous angle is different from that of halogen headlights, so it is easy to lead to the divergence of light. Not only that, the "dead light rate" of the COB light source is extremely high, as long as one of the lamp beads is damaged, it will affect the normal operation of the other lamp beads, and improve the danger of night driving.

2. The installation of lens-type LED headlights may be small and large. First of all, not all models have enough space to add lenses, especially for vehicles that don't have the option of "lenses" in the optional equipment, which can be more cumbersome to install. Secondly, in order to install lenses, it is necessary to disassemble the lampshade and bumper and other components, which will make the sealing of the headlights worse.