What is the material of the crown that goes after root canal treatment!!!!!

Generally, when the occlusion is very low, the crown of the metal occlusal surface will be made. It's not wrong for the doctor to call the shots for you, so that there will be too many choices to save and you will be at a loss. The maintenance of dental crowns is mainly to clean and reduce biting too tough food, such as beef tendon, plate tendon, of course, if you eat too hard food, it will lead to damage to the jaw teeth, after all, the hardness of the metal surface will be stronger than the surface hardness of natural teeth.

The porcelain teeth made of bad nickel-chromium alloy will be volatile, will be oxidized, and the edge of the neck will be oxidized and blackened, but the jawfacial blackening should be a thin porcelain layer, and the teeth that have generally been drawn through the nerve. If you make a porcelain cover, don't ask for very hard food, nothing else, but generally such materials must be removed if you want to do MRI.

Dental crown, is the meaning of dentures, dentures, dentures have many varieties, the material is not the same, good zirconia, gold crown, all-porcelain crown, pure titanium crown, etc., the kind you make should be the general ordinary porcelain, is composed of the inner crown and the outer porcelain powder, the light black you said should be the color of the inner crown, normally speaking, it should not be exposed the inner crown, but due to the limitations of your oral conditions, the occlusal distance is not enough, and the doctor did not give you the teeth of the jaw, so the expedient measure is only to expose the inner crown to you.

The general ordinary porcelain is nickel-chromium alloy, and the better point is cobalt-chromium alloy, and the maintenance of these dentures only needs to pay attention not to eat too hard when eating, and don't collapse the porcelain outside.

The light black crown you mentioned may be a metal crown, and it may be that your teeth are not high enough to make porcelain, so you can only make metal, but you still have to ask the doctor who did your tooth for the specific situation.

1 Crown;

2 Something like a crown, like a crown of a tooth;

3 Coronation.

Remember, trust your own feelings, what you feel high, must be high, must!! You have to find a doctor to adjust to the normal feeling of the bite. There is no such thing as "adaptation" in wearing a crown, and anyone who says so is fooling people.

The so-called "adaptation" from discomfort to "adaptation" is a manifestation of the "morbid" adjustment of your chewing, nervous, and muscular systems. To use technical terms, you can say that you are now "traumatic".

Usually it won't go down, so you'd better go back to the dentist and adjust the higher place again.

I haven't gotten used to it yet, but I'll be able to do it normally in a few days.

Generally, after the insentation, if you feel unwell, you need to adjust it, and you can go to the doctor to adjust it.

First of all, the crown is a must, and this does not need to be considered.

Clause. 2. All dental materials as long as they are not small workshops have dental protection and have no major impact on the body. So the effect is only due to a very small number of people's physical reasons.

Clause. 3. As long as the teeth are not too tightly occluded or the teeth are very low, there is no problem with the choice of porcelain teeth.

Clause. Fourth, the metal crown is definitely the strongest, because there is no porcelain layer, so it will not jump porcelain. And the metal used is cobalt-chrome alloy, which has basically no effect on the body. But the aesthetics are poor.

Clause. Fifth, porcelain is the best restoration. Porcelain is different according to the metal, there are ***, base metal. **1000-2000, base metals from more than 200 to 800.

Suggestion: Use cobalt-chrome alloy to bake porcelain teeth, with good human compatibility **moderate, about 400-600 yuan. Best value for money. It is better not to choose a metal crown, it is too ugly.

I want to ask you which tooth exactly that big tooth you are referring to.

The oral cavity is divided into four parts: right maxilla, left maxilla, right mandible, and left mandible, which are named from the middle to the sides: central incisors (i.e., incisors), lateral incisors, canines (i.e., tiger teeth), and the first.

1. 2 pairs of cuspids, first.

First, second, and third molars.

If it is a front tooth, make porcelain, because it is the best-looking, but it is not used, usually pay attention to the use, if it is an invisible deeper position, choose a firm. Consult a dentist for what to do.

If you want to look good and sturdy, I'm afraid it's a bit difficult, because if you want to be beautiful, you have to sacrifice quality, and if you want quality, you have to sacrifice beauty, and it's difficult to have both!

If you don't require aesthetics, the metal crown is good, ** varies from region to region, but it is a relatively cheap repair method, the disadvantage is that the bite force is larger, and in some cases, such as the condition of the occlusion is not good, it may cause damage to the jaw teeth.

Personally, I feel that the metal crown is more suitable according to your requirements.

Nickel-containing porcelain teeth are not good for the human body and are not recommended.

Metal cast crown. It's been eliminated a long time ago.

Just choose the lowest ** porcelain that does not contain nickel, four or five hundred, and some places can negotiate the price.

Use cobalt and chromium metal to make a steel crown, 240 yuan a piece. There are few teeth grinding, and it is strong and durable, and there is no negative effect.

The metal sealing is not very good, in fact, I think the most economical and affordable is not harmful to the human body or cobalt and chromium is better, the metal crown is relatively stable, and its metal properties are relatively stable, will not cause gum black lines or recession, just get a good tooth, you don't have to worry about it anymore!!

The upper back teeth can be made metal, you can't see it, and the lower back teeth depend on what you think, and the metal ones can definitely be seen.

Nickel-cadmium alloy poisoning is only an isolated case, and it may be caused by impurities in the material. Just go to a regular clinic to do it.

If the tooth is cracked, it is best to do a set. If you feel that the economy can't afford it, just make metal, the cheapest hammered crown is 70 yuan. The casting is more expensive, more than 200. Of course, you get what you pay for.

Hello, I am a dentist from Fujian. After reading your story, oh I think you're going to have braces! It's because your teeth are so thin that you should do it even more.

Otherwise, if you use it carefully, it will break sooner or later. If you fix it after it is broken, the cost of sending it will be even greater. The doctor is giving you a nail just to increase the force of your tooth.

So the doctor did the right thing! Since there is a problem, it should be dealt with early! There is also the problem of cost, if you don't get it now, the cost of sending it in the future will be greater, and the effect is not as good as now.

That's it, if there's anything you don't understand, you can send me a message. Good luck soon**!

Hello: I feel that the charge is OK. That place in Wenzhou shouldn't be too high. But the quality of the processing of the Asian crown should be ***. If economic conditions are taken into account. You can choose to do cobalt chrome porcelain teeth, and if economic conditions permit, you can choose to do zirconia porcelain teeth!

Porcelain teeth are recommended for front teeth Metal teeth are recommended for back teeth There is little difference in the durability of the metal teeth listed There is only a difference in toxicity How much is toxic to heavy metals. This dentistry**is a little expensive, you can go to other hospitals for reference**.

Hello, if the economic conditions allow, of course, it is best to choose the material of zirconia.

If you grind your teeth, you have to do a crown, because the teeth have been ground down a whole layer, and now you are wearing a temporary tube, it won't take long, it's been a week, the crown must be done, if you return the money, I don't think there is much hope!

Of course, the front teeth are porcelain crowns, porcelain crowns have many medium materials, and the back teeth are different in the size of many people's mouths, so you should also consider whether to make a crown that is consistent with the color of the teeth.

The cost of porcelain crowns is related to the level of regional consumption, the doctor's operating procedures, the geographical location of the medical institution, the decoration, and the audience. At present, it is mostly priced by material. The choice of a variety of materials is actually a bit redundant, and you can choose from the following four types.

Functionally, if no one can see the back teeth, usually the mouth is not large, the choice of metal crown is the most appropriate, it will not have too much metal precipitation, harmless to the body, the key is that its edge fit is incomparable to the porcelain crown, and the cost is also low. Generally, the crown of cobalt chromium metal is about 600, and the crown of pure cast gold alloy is more expensive than that of gold porcelain. Each is around 4000.

Cobalt-chromium cast steel crown, durable and useless, 240 yuan a piece.

Hello, dental crowns (artificial crowns) are also called braces, *** crowns, porcelain crowns, porcelain (enamel) crowns, stainless steel crowns. Which is suitable for you, it is recommended to go to the hospital for relevant examinations.

You're only 20 years old now, and crowns are generally recommended, and I don't know exactly how your teeth are, but as long as there's a distance, it's definitely recommended.

You can do a belt or an inlay or something to reinforce.

Steps to your situation:1Sampling 2

Tooth preparation (i.e. grinding teeth) 3Proofing 4Bite wax 5

Do temporary teeth 6Colorimetric ( What do you do teeth?) Steel teeth?

Porcelain? Zirconium dioxide? Or what?

Except for steel teeth, they are all color-like).

It's probably about these steps, and it takes more than half an hour in total, and it depends on the doctor, but it's definitely at least half an hour.

Generally, if you pay attention to the use of your own words, it is not particularly necessary to change the specific situation to see that it is not recommended to do steel teeth, you are still young You can consult your doctor there I hope it will help you, these are just references, and the specific operation should contact your doctor.

First, although the crown of the tooth is short, the crown is the only way to protect the tooth for a long time, even if it is lost, it can be glued again, which is better than a broken tooth, and if you do gingival incision, or extend the crown to the root, there should be a way for the doctor to fix the crown.

Second, two steps, the first step is to take the mold, the second step is crowned, generally about seven days.

Third, the back one should not be beautiful, you can make a cast steel crown, and you can make cobalt and chromium to improve the quality, and you don't need to change it for a lifetime.

1: Yes, the doctor will have a way to solve the problem of short crown.

2: A few days before and after, it is not a sentence or two that can be said clearly, probably: prepare teeth to touch and wear teeth.

3. If you want to change pages in the future, it will not be harmful to the body, which can rest assured, and the life span is generally more than ten years.

If you are afraid of falling, you can make piles, but it is difficult to fall.