Can the moisture proof film of parquet be laid on two layers?

1. Drying of sports wood floors.

In the production process of solid wood sports wood flooring, a professional drying process must be carried out. This art is very important. When sports wood flooring leaves the factory, the moisture content of sports wood flooring.

To achieve equilibrium. How much exactly? It should be adapted to the climate and environment where the stadium is located.

2. Install moisture-proof measures.

Before the installation of sports wood flooring, it is necessary to level the pavement floor of the stadium and do a good job of dehumidification; The sports wood floor installation system should be equipped with moisture-proof membranes, ventilation holes and other moisture-proof accessories; Expansion joints should also be reserved during the installation of sports wood flooring.

It can prevent moisture and bulging of sports wood floors.

3. The humidity in the gymnasium is guaranteed to be between 35% and 50%.

Good external conditions are the basis for the maintenance of sports wood flooring, especially the environment in the gymnasium, and it is best to keep the humidity in the gymnasium between 35%-50%. If the outside air is dry due to the influence of the northern monsoon during the dry winter season, the air humidity in the building will be reduced.

Therefore, it is necessary to keep the museum closed and reduce air ventilation and convection.

4. Maintenance and waterproofing.

Sports wood flooring should be waterproof in daily maintenance, such as sports wood flooring should not be soaked in water, and the water facilities of the stadium should be tested at ordinary times to prevent the sports wood floor from soaking in water.

Can the moisture-proof film of parquet be laid on two layers?The moisture-proof film is made of aluminized moisture-proof film and metal laminated film, and the aluminized moisture-proof film is better, just like the cigarette paper in the cigarette box, but it is not thicker, if the solid wood floor is paved, it is necessary to play the wooden flute, and the width and length distance of the solid wood can be established, so that it can be moisture-proof and cool-proof, and this kind of house with solid wood floor, the general heating uses art radiator heating.

If you lay laminate flooring, you should first level the ground, add a layer of artificial pebbles at the leveling level, which can increase the heat, and then level with cement sand, and then lay a layer of moisture-proof film or moisture-proof mat on top of it after drying, and then lay a composite floor.

Laying wooden floors, to hit the wooden keel on the ground first, you can do a moisture-proof layer in the wooden keel, put a cockroach brain pill between the wooden keel, or put on the camphor wood (piece), it is recommended to use camphor wood (piece), the taste is fragrant, the smell is not harmful to people, the moisture-proof effect is better, the moisture-proof layer is very important, the floor is paved, it is not easy to change casually. It is recommended to place some in each square, put it away, and then lay the wooden floor, you can use it with confidence in the future, and the wooden floor usually pays more attention to maintenance.

Generally speaking, it is to be paved, but if it is not the bottom layer, there is not much requirement;

The significance of laying moisture-proof film is mainly.

1) Since the paint board is not grindable, the moisture-proof film has the effect of adjusting the ground level.

2) It can increase the moisture-proof performance of solid wood flooring.

This method also has disadvantages: it is not conducive to the ventilation of the bottom plate, and it will make the bottom plate mildew in the long run.

It must be paved, and environmental protection film can be laid, and the paving treasure can be laid underneath to play the role of heat preservation and moisture-proof.

Yes, um, be sure to lay a moisture-proof film first.

Yes, in the case of paving the floor at home, it is necessary to pave moisture-proof film, regardless of whether it is a pure solid wood floor, which is also a moisture-proof treatment for the road surface, so that our wood floor is more durable. And the cost of paving moisture-proof film is not too high, and the process of paving is also very simple. However, the benefits are obvious, as it can maintain the floor of the home from moisture and rot.

In fact, the greater function of the moisture-proof film is to isolate and isolate the gas and ambient temperature. In fact, simply put, the moisture-proof film is like the padding material in our clothes and pants, which can isolate the thermal communication between the human body and the strong cold air outside (road surface). It creates a layer of non-flowing between the human body and the road surface"Dead gas"(deadair), and use the body's heat energy to slowly raise this layer"Dead gas"The ambient temperature makes it a natural barrier between the human body and the heat exchanger in the middle of the road surface, and then gives full play to the actual effect of thermal insulation and waterproofing.

In addition, the ambient temperature of the earth's surface is much lower than the temperature of gases, when we understand the surface of the earth, the effect of transmission will send the heat of our skin to the road surface, causing the skin to lose kinetic energy and cause a sharp feeling, so we will have to moisture-proof film to help people do a good job of barrier work, not easy to cause hypothermia due to damage kinetic energy.

In the area where the floor is paved to the area adjacent to the wet and cold area, the moisture-proof film should be returned upward, and the nearby part of the wooden floor should be wrapped with a moisture-proof film to avoid moisture entering, and prevent and reduce the change of the wooden floor in this part of the area. When the waterproof isolation layer is laid, the empty paving method, strip sticking method or point sticking method can be selected, and it is immediately paved on the surface of the cement bottom layer.

In the middle of the kushi. A plastic hose can be set to protrude in the middle of the moisture-proof membrane to create a full-line exhaust duct to bring volatile water into the air according to the exhaust duct. The joints of the raw materials of the waterproof isolation layer should be separated.

The waterproof isolation layer should be surrounded by the opposite side, and the relative height should not exceed the baseboard exhaust pipe groove, and should be detailed and sealed. If there is damage, it should be repaired immediately. Moisture-proof and waterproof countermeasures will be carried out in locations prone to leakage such as living balconies, and waterproof materials should be 200-300mm higher than the road surface when the walls of the house are paved with waterproof materials.

Need. In this way, it can have a better moisture-proof effect and can prevent water leakage on the floor. That is, after laying the moisture-proof film, it can prevent the evaporation of water and reduce the air humidity.

Moisture-proof film is generally to increase the moisture-proof function of the floor, if it is not a solid wood floor, it is generally not needed. Also, if you're not the bottom layer, you don't need to install a moisture barrier.

If you lay a wooden floor, you also need to lay a moisture-proof film, if you don't lay a moisture-proof film, then this is also very harmful to our floor.

<> "Is it okay to not lay moisture-proof film on composite flooring?"

No, you cannot. Laminate flooring from the bottom layer to the surface layer, are made of wood materials, if not laid moisture-proof film, in the process of daily use, the laminate floor is very prone to moisture, affecting the service life of the composite floor. The moisture-proof film can not only increase the wear resistance of the surface of the composite floor, adjust the function of the floor, but also have a good moisture-proof effect and increase the service life.

2. What should be paid attention to when laying moisture-proof film on composite flooring?

1. When the floor is connected to the damp place, the moisture-proof film should be turned upside down, and the surrounding part of the floor should be wrapped with the moisture-proof film to prevent moisture from entering, so as to avoid and reduce the deformation of the soil in the area. When laying the moisture-proof insulation layer of socks, it can be directly laid on the concrete base surface by using the empty paving method, the strip seam method or the point seam method.

2. A plastic tube can be added to the bone, so that the moisture-proof film can rise in the middle to form an exhaust channel, and the evaporated water can enter the atmosphere through the exhaust channel, and the seams of the moisture-proof material should be staggered.

3. The moisture-proof insulation layer should be flanged, and the height should not exceed the baseboard outlet groove, and it should be kept well sealed. If there is any damage, it must be repaired in time. Waterproof and moisture-proof measures should be taken for parts that are prone to water leakage such as balconies, and waterproof coatings should be applied to the walls of the room close to the ground.

4. Moisture-proof measures can be made of synthetic polymer membrane, polymer modified asphalt membrane and other materials, and the height of the ridge is not lower than, or fortified according to the design requirements. The floor level of the bathroom and kitchen should be lower than the floor level of the room, which meets the design requirements.

1. Before laying the floor copy board, lay a layer of moisture-proof DU film under the floor, and the joints between the moisture-proof films should be tightly linked, and the DAO should be extended along the wall surface for five to six centimeters at the position of the wall against the wall.

2. Splice gradually, connect the seams with sealing tapes, and cut the edges neatly. The effect of moisture-proof film can effectively prevent moisture.

Before laying the floor, lay a layer of moisture-proof film under the floor, and the joints between the moisture-proof films should be tightly linked, and the position against the wall should extend five to six centimeters along the wall surface.

Suck the dust on the ground with a vacuum cleaner, and then spread the moisture-proof film directly; Gradually splicing, don't pave all at once, lay a section of flooring, and then connect a moisture-proof film; The seams are connected with sealing tape and pasted. The cutting of the edge should be neat, and it should be paid attention to during the construction process, and try not to break the moisture-proof film.

Before laying, the ground needs to be cleaned. When laying, it is best to seal it with tape to ensure the sealing effect of internal moisture. The moisture-proof film should have a certain thickness, generally stacked at a thickness of about 5 10 mm, and the position of the wall foot should be taken into account when laying the moisture-proof film, so as to effectively prevent moisture from penetrating into the wooden floor from the ground.

The most advanced moisture-proof film dedicated to wood flooring on the market can be laid on the surface of wood flooring, which can play a role in isolating the surface of wood flooring and preventing moisture on the surface of wood boards.

Generally speaking, the home decoration will first decorate the ground, and the decoration of other rooms will be more convenient. It is not only troublesome for the decorator to decorate other places first, but it is also inconvenient to travel by himself. So, the first thing to decorate is the floor.

The decoration of the general ground is nothing more than two situations, one is the floor and the other is the tile. It mainly depends on the personal home decoration style and favorite materials. Generally speaking, the surface of the tile is relatively smooth, and the overall gloss of the floor used at home is also very good.

Flower here reminds everyone that when installing tiles at home, you must make a beautiful joint for the tiles in the later stage, otherwise it will take longer. The seams between the floors are all black and look ugly.

Others decorate their homes with flooring. Flooring is also divided into solid wood flooring and laminate flooring, and each one is suitable for you. If it is in the south, if you happen to buy a house on the ground floor, Huahua does not recommend this kind of home flooring.

As we all know, in the south, there is a lot of rain, so it is easy to get wet. If the floor is made of solid wood, water may seep into the floor. In addition, if the house is not well ventilated, there will definitely be moldy and hairy floors in damp places.

So the floor in this room is relatively low, it's better not to use the floor! If you use tiles, you can use a mop to dry the moisture from the floor. Some friends will ask, I really like the decoration style of the floor. Is there really no way? Not really.

After many inquiries and understanding of Huahua, I also specially asked the decoration master who laid the floor. The decorator said that in order to keep the floor at home from moisture, it is necessary to do a good job of moisture-proof work to prevent the moisture under the ground from flowing upward. Before laying the floor, the master will spread a layer of film between the floor and the floor.

This kind of film can well keep the moisture of the dismantled dust under the floor, and can be isolated from the floor to prevent moisture.

Laying a moisture-proof film under the floor can also extend the life of the floor and prevent it from failing quickly. It is also the guarantee of our daily life. If it is a decoration, you can ask the master if there are any moisture-proof measures under the floor. After confirmation, you can hand over your home to the decorator with peace of mind!

Uplink: The moon is full and the moon is full in the middle of the month. Downlink: Where is the owner of the flowers?