How to sew a quilt without seeing the thread, how to sew clothes without seeing the thread

In daily life, there are often cases where clothes and pants are accidentally opened, so how to sew clothes so that you can't see the stitches?

Tools Materials.

Scissors. Sewing.

Items that need to be sewn. How it works:

Choose the color of the good thread.

Before choosing the needle and thread, be sure to choose the color of the thread according to the color of your clothes, and don't choose the needle too thick, just appropriate.

It can be used to re-stitch from the inside, which makes it stronger. After sewing, turn it over again, the effect is very good, and the stitches are not visible from the outside. If there is a lining in the garment, it will be troublesome to open the seam, so you can sew it like this: align the seams, then take the needle and close the thread.

Put it in the innermost part to prevent it from being exposed to the outside and affecting the appearance.

Use the stitching method of sewing clothes, such as: flat needle, false stitch, back needle, hidden needle sewing, etc., to ensure that the appropriate method of sewing clothes does not affect the appearance. The following is a brief introduction to the two more commonly used acupuncture methods!

Flat needle: This is the most commonly used and simplest method of hand sewing, usually used to do some stitches that do not need to be very strong, as well as to make pleats, necks, etc. Can you pick a few more stitches at a time and then tighten them together? Thrum. The distance between the pins of a flat needle is generally kept at about centimeters.

Needle return, needle reverse: the needle tip retreat sewing method, which is similar to machine sewing and the strongest hand sewing method.

When the stitches are still inside the garment, we first wrap the thread around the needle twice.

After wrapping, we press the end of the wound thread with our fingers, and pull the needle out while holding down the end of the wound thread.

It's done in the end, isn't it easy?

Special Tips. When sewing, the thread must be tightened properly.

Flip the ** out, where you need to sew it on, and then flip it back up, you can't see the thread at all.

How to sew clothes without seeing the thread is as follows:

Tools Materials: needle, thread.

1. First of all, check the size of the open thread part of the clothes, prepare a long thread with the same color as the clothes, tie a knot at the end of the ** to prevent the knot from falling off when sewing the needle, start sewing the needle from the junction of the open thread of the clothes, and the needle of the sewing needle passes through from the inside to the outside, so that the thread can stay inside the clothes.

2. The opening thread of the garment, the needle detours from the outside to the inside, sews the needle back and forth in the fabric of the clothes, and after the part of the open thread is completely sewn, gently pull the needle and thread to reconnect the open thread together, do not pull the needle and thread hard, otherwise the fabric will be deformed, or the thread of the sewing needle will be seen.

3. When waiting for the end of the sewing needle of the clothes, you can prick the needle around the stitching casually, loop the needle line and wrap it around twice, and finally use scissors to remove the residual thread, and then check whether the clothes are sewn.

Different stitches for sewing clothes

1. Flat needle stitching.

It is a basic stitch method for hand sewing, which is mainly used for splicing or sewing cloth pieces. Complete the action of lifting the needle. Insert the needle at point A on the right side of point C at the starting point of hand-sewing, exit the needle at point B at the front point, and then return to the needle entry point at the starting point, and exit the needle from point C at the starting point.

Then finish the length of the sewing in one stroke, and then return the stitch forward at the end. Finally, the knot is tied and the remaining thread is cut off, that is, the flat needle stitch is completed.

2. Seams. It is often used to sew a folded cloth in half onto another piece of cloth, such as piping, flipping and sewing zippers. The needle is inserted between cloth A and cloth, and then the needle is removed from the surface of cloth A.

The needle is inserted from point B on the cloth B, and the needle is drawn from point A on the cloth cloth, that is, a needle is completed. Repeat the action in step 2 to complete the part that needs to be stitched.

3. Roll needle sewing.

It is used to sew two pieces of cloth folded in half, and after sewing, it is a small diagonal line on the surface of the cloth. The needle is inserted between cloth A and cloth, and the needle is discharged from the surface of cloth A. The needle is inserted from point B on the cloth B, and the needle is inserted from point A on the cloth cloth, that is, a needle is completed.

Repeat the action in step 2 to complete the part that needs to be rolled with early cavity needles.

Now the quilts we cover are bought directly, and it is rare to make their own quilt cores and quilts, and sewn quilts are relatively rare. However, in some places, there is still a custom of sewing quilts when getting married. If you sew a quilt, you will sew a few threads on it.

So is there any attention to the number of lines sewn on the quilt?

There is no special attention to sewing a few threads for sewing a quilt, usually every 10 centimeters. However, in some places, there will be a certain amount of attention to making wedding quilts, such as making them in two months, and the people who make quilts must have both children and daughters, and the husband and wife are happy, depending on the local customs. First, the needle thread is threaded from top to bottom, then the thread is divided into two strands, which are placed on the machine needle and the needle tail, and finally the quilt is sewn by threading it repeatedly.

There is no fixed statement about this, just sew according to the size of the quilt, and sew a few if you can.

When sewing a quilt, it is necessary to first measure the length and width of the quilt, determine the quantity, material and pattern of the fabric to be purchased, then cut it well, and then buy a zipper for the quilt. Once you have determined the position of the quilt zipper, sew the zipper. Then the width of the quilt is sewn, and finally the underside of the two pieces is sewn together.

Put the large sheet underneath and lay it out, then put the quilt, pay attention to the corners flattened, and then lay out the sheet on top of the quilt. Wrap the top and bottom according to the parallel lines, then arrange the four corners, and then you can sew the quilt.

If you need a thick quilt to keep warm, it is recommended to choose a thick quilt, a fiber quilt, a duvet and a wool duvet. Cotton and wool comforters are warmer but heavier, and fiber comforters and duvets are relatively lighter. In terms of text, fiber comforters and cotton comforters are relatively cheap, while duvets and wool comforters are higher.

If you choose a thin quilt, thin quilts, fiber quilts, and silk quilts are all possible.

A high-quality quilt is fluffy and soft when touched by hand, without noticeable flakes and hard stems. If the hand feels good, but the elasticity is poor, and the quilt does not swell back for a long time after being pressed by the hand, other textile materials may be mixed in. If rough, grainy, and other strange sensations are felt, it means that the pile inside the quilt is of poor quality.

Summary. Old-fashioned quilt quilt cotton thread, cotton thread, white cotton thread, thick thread, quilt thread, do live thread hand sewing. To sew a quilt, you have to use such white foreign thread. Mom always patiently wound the white foreign thread into one white and chubby ball of thread after another.

What thread is good for sewing a quilt The white thread used for sewing a quilt.

Old-fashioned quilt quilt cotton thread, cotton thread, white cotton thread, thick thread, quilt with call thread to do live thread hand sewing. To sew the quilt, you have to use the white foreign thread that talks about the bad Kai. Mom always patiently wound the white foreign thread into one white and chubby ball of thread after another.

1. Lay out the cloth inside the quilt first, and generally choose a heavy white cotton cloth, because the inner cloth of the reed finch is the most uproar, and it needs half a bag of other things. 2. Quilt core, there are two options for quilt core. In summer, you can make a thin quilt core, and in winter, you can make a thick quilt core if you are afraid of cold.

Of course, most of the quilt cores are generally made of cotton, but there are also people who make duvet cores and wool, which depends on personal preference. 3. The back cloth, in order to look good, will be made into your favorite satin color. Some people prefer monochrome, which is also based on personal preference.

1. First of all, check the size of the open thread part, mainly consider the length of the thread that needs to be threaded, and prefer the length of the thread to be longer, rather than the embarrassment of no thread halfway through.

3. Needle starting. Starting from the crack junction, take one side, pass the needle direction from the inside to the outside, and leave the knot on the inside. For loose fabrics such as plush toys, take the second one near the first pinhole, and the needle detours from the outside to the inside, and collapses through the two strands, and gently tightens to complete the fixation of the starting point.

Then pass from the inside to the outside to complete the needle lifting.

4. Take-up. After the full judgment part is sutured, it can be closed in a circular way, and the needle is pricked around the suture to form a loop, and the needle is tightened after two loops to complete the retraction.

5. Use scissors to cut off the remaining thread, and it's done.

Sewing clothes to see not to the thread method:

1. Thread the first stitch out of it.

2. Fold it in half and wear it out.

3. Wrap the thread around in front of the needle.

4. Plunge through the previous ring.

5. Then sew repeatedly according to the same method.

6. When collecting the needle, pay attention to the position of the ring and wear it from the ring.

7. Pull the needle and thread vigorously and pull out the thread.

Generally, the quilt does not pay attention to sewing a few threads, and it is generally a very centimeter stitch. But there is a saying about getting married to make quilts, generally in the second month, people who make quilts are also particular, in the countryside to have both children and daughters, and the husband and wife are happy and people to do, indicating a happy life after marriage.

How to sew the quilt:

Measure the length and width of the quilt first, determine the amount of fabric, material, and fancy to buy, and cut it, and then buy a zipper for the quilt mouth (there are zippers specially used to sew quilts).

Determine the position of the quilt zipper and sew the zipper.

Sew the width of the quilt (two pieces in total).

Finally, just close the bottom surface and sew it on. (In the above processes, pay attention to the direction of the bottom surface of the fabric, so as not to reverse it).