What should I do if there will be latex paint cracks in my house?

The latex paint surface should be adhered to make the latex paint surface look smoother and smoother.

It is best to ask a professional to repair the cracks of latex paint to avoid the cracks becoming larger and causing danger to the overall structure of the house.

The reason for the cracks may be because the wall itself is hollow, or there is no net hanging in the whitewash latex paint, resulting in cracks.

The cracks in the latex paint may be caused by the cracks in the bottom putty, which can only be shoveled off that part of the putty and then re-brushed and re-sanded, and it is best to brush the same color of latex paint.

The putty of the house is not completely removed, and the developer will choose a relatively hard white cement and tempered paint, also because there have been small hunters on the water surface of the wall, but they have not been treated in time, which makes the wall crack.

It may be because the material used is relatively inferior, and the original putty is not removed when scraping, the wall is not flat, and the hardness of the material used is relatively large, and the toughness is relatively low.

It may be because the original putty has not been shoveled off, resulting in it not being combined with the wall joints, or it may be because the cement blocks on the wall have cracks and have not been treated in time.

Foundation settlement For self-built houses, the foundation will have a self-balancing process due to the different forces of the various parts of the house. In this process, tension will be generated on the local wall, which will cause the wall to crack, resulting in cracks in the latex paint, which is manifested as irregular diagonal joints on the surface of the latex paint. Any latex paint has a strict mixing ratio.

When preparing latex paint, some masters do not mix it according to the requirements and add more water to dilute it, resulting in the surface of the latex paint can not form a good film, or the film is too weak. If it takes a little longer, there will be a slight cracking.

After the latex paint is applied, it should be dried in a cool place for about 3 to 4 days. During this period, doors and windows should be closed to maintain indoor humidity and prevent latex paint water from rapidly volatilizing due to air circulation, resulting in cracks on the surface of latex paint. It is manifested as a dry crack that will fall off when touched by hand.

The main body of the building is not as stable as expected. It sinks and even tilts. The wall can be tilted to one side or both high and low.

Buildings are allowed to undergo a certain degree of deformation, but in the process of deformation, it can cause cracks in the walls.

The cracks caused by the main problem are generally deep, even in the lowest cement layers. This problem is also the most difficult to solve. In addition to shoveling off the surface of latex paint and putty, cement walls should also be repaired.

In general, this problem cannot be solved without redecorating. This crack will extend to the wall, causing cracks in the latex paint on the wall. When curing, the base layer should be thoroughly removed, the cracks should be removed, and then epoxy resin should be injected into the gaps and filled until the gaps are filled.

Paste carbon fiber rip-proof cloth on the surface of the gap to reinforce. When all this is done, you can repair the latex paint with putty.

This crack is the most difficult and complex crack to repair. This crack is usually caused by the wrong ratio of cement and yellow sand when using a powder wall. Many water conservancy enterprises reduce the amount of cement, resulting in cracking of the cement mortar coating layer and cracking of latex paint.

To repair such cracks, simply remove the putty layer to expose the cracks in the cement paint layer, and then apply them directly with a carbon fiber anti-crack cloth. This crack is the slightest crack and is usually caused by the putty layer being too thick or too thin. For repair, apply a bandage made of crack-resistant fiberglass mesh or raw wood pulp directly and then apply putty.

If there are cracks in the latex paint of the house, you can buy some latex paint to repair it and cover the cracks, or choose some latex paint of better quality, which is not easy to crack.

If the latex paint has cracks, you can buy some latex paint to repair it again to cover the cracks, or choose a better quality latex paint at the beginning.

Remake the cracked latex paint product into wall putty latex paint, if the latex paint crack is very small, you can hang it on the wall to decorate the crack.

Cracks in the walls of latex paint in new housesWhat's going on? What is the solution?

Putty scraping the wall can make the wall look softer and more delicate, that is, beautify and save materials. However, if the frankincense layer ruptures, it is easy to cause the rupture of the epidermal layer.

**Method: If the crack has penetrated into the layer of cement, you can also first use a sharp tool to enlarge the size of the crack with a screwdriver, rivet and polish the filled plaster, use mesh fabric or kraft paper and then align the putty level.

Mainly due to the quality of wall paint products and the wrong operation in the construction process of wall paint. If the temperature is too low, the film-forming temperature of the wall coating cannot be reached, and the continuous coating film cannot be formed, which will also cause the paint on the wall to crack.

Treatment: If it is only a crack in the surface paint film, you can use fine sandpaper to polish the crack, and you can choose the same color wall paint as you can repaint. In addition, many consumers have made every effort to choose a good painting when they buy paint, especially when they see a carton that says "crack resistant" on it, thinking that using this paint can prevent the wall from cracking the product.

Gypsum cracks are divided into normal cracks and abnormal cracks. Normal cracks mainly refer to cracks in the plaster layer caused by the shrinkage of cement mortar. Abnormal cracks are mainly caused by insufficient materials or construction techniques. Normal cracking is difficult to avoid, but abnormal cracking can be avoided.

**Method: If vacuum cast in a large area in the plaster layer, the layer of the original plaster must be removed, and the plaster layer of the cement mortar must be reworked, then flattened and painted according to the normal process.

The crackage of the seal is mainly caused by the joints between the wall cutting reinforced concrete and brick ceramite, reinforced concrete beams and ceramsite brick door compartments, separating the joints between the plasterboard and the original wall panels. Cracks in the office board are mainly due to the surrounding environment or external forces. Drywall, prefabricated partitions and prefabricated floor slabs will shrink and change position, which will result in joint cracks, usually vertical or horizontal.

Solution: It is recommended to repair the entire building after the deformation has stabilized, and the repair can be repeated in a short time.

Hope it will be useful to you.

You can get it for free

Over time, a renovated house can have a variety of problemsLatex paint wall cracksIt's one of the most common. Cracks in latex paint walls not only affect the beauty of the home, but also easily endanger health. So what causes cracks in latex paint walls?

And how do we fix it?Latex paint wall cracksThis? Now let's analyze the causes of cracks in latex paint walls and repair countermeasures.

1. Why do latex paint wall cracks occur?

1. I bought a poor quality latex paint.

The quality of latex paint on the market is still very different, although it is difficult to distinguish from the appearance and smell, but when the brush is on the wall for a period of time, the difference can be found. Inferior latex paint is often missing or replaced by other components, resulting in poor latex paint performance and easy to lead to wall cracks. In particular, the artificial glue in latex paint is more likely to cause cracks on the wall surface of latex paint after it is replaced or the composition is reduced.

2. The base layer (putty) is not treated well before the wall is painted with latex paint.

This situation is mostly because the putty is not evenly scraped on the wall, resulting in cavities in the wall, and the air inside will cause cracks on the wall due to air pressure. Sometimes latex paint is applied before the putty is completely dry, which can also lead to air accumulation in the wall and eventually cracking.

2. How to repair latex paint wall cracks.

1. Small cracks.

First of all, the base layer of the wall should be cleaned in the cracks on the wall, and then we paste the cracks with white tape, and then apply putty and brush latex paint. In the case of relatively small cracks, it is suitable to repair them in this way.

2. Irregular cracks.

You can also remove the insulation board on the surface of the wall, or remove the cement wall, install a layer of gypsum board or "five-mile board" outside the insulation layer, and then paint latex paint on it. This method can remove all the irregular cracks, but this method is expensive and difficult to construct, and it may be more troublesome if you repair it yourself in the general family. If the latex paint wall cracks at home are not very large, it is better not to use this method.

3. Elastic putty.

Another way to repair is to use elastic decorative materials. At present, there is a material called "elastic putty" in the method of wall substrate treatment, which can make up for the problem of wall cracks to a certain extent. Of course, these materials themselves are less "elastic" and may not be very effective on walls with large cracks.

4. Professional maintenance.

Find workers to repair or call ** to the decoration company to maintain. This method is the easiest, except for a certain amount of repair costs, you don't have to worry about the rest.

Summary: The above are some of the reasons for the appearance of cracks in latex paint walls and repair countermeasures. You can choose the appropriate treatment method to repair the cracks in the wall at home, so that the house can be rejuvenated.

Good wall decoration not only makes the wall look more beautiful, but also plays a good decorative role in the overall decoration of the home. Latex paint is a type of wall that is used a lot in the decoration process. However, whenWhat to do if there are cracks in the latex paint wall, the surface of the walls of latex paint sometimes cracks, and this can affect the overall beauty of the home.

So, what should we do at this point? First of all, we need to find the cause of the cracks in the wall, and secondly, we need to repaint the cracked parts of the wall, or treat them with the installation of gypsum board and the application of elastic decoration materials.

Why are there cracks in latex paint decorative walls? It could be the gap between the insulating panels and the plates of the wall, and the cracks that appear are cracked. It is also possible that the wall is slotted, and the stress cracks that occur when the wire groove is filled with ash may be that the putty powder spreads unevenly when decorating the wall, and the scratching is too thick, so not only the latex paint cracks, but the latex paint also cracks, and the phenomenon that the wall surface of the latex paint will fall off.

When the latex paint wall is broken, we can repaint the latex paint. Where the latex paint wall is cracked, clean the base layer of the wall, and then apply a good layer of cloth to the wall. The re-brushing of latex paints utilizes the tension of the fibers to better ensure the integrity of the latex paint's film.

In this way, the latex painted walls will not crack.

If the joints between the latex paint insulation board and the board are broken, the insulation board on the wall can be removed, and then the board is installed on the outside of the insulation board, and then latex paint is applied to it, so it can both remove the crack regularly and it is more convenient.

When the latex paint wall is cracked, you can choose a decorative material with a certain elasticity, that is, elastic decoration material. Elastic putty can compensate for wall cracks to a certain extent. However, this method is only suitable for small-area latex paint wall cracking, not wide-area latex paint wall cracking.

If the latex paint wall is cracked, if we don't repair it in time, not only will the crack range become larger and larger, but it will also have a bad impact. When the latex paint wall cracks and the latex paint wall comes off, it is not only unsightly, but also somewhat unhygienic. According to the above methods, you can solve the problem of cracks in the latex paint wall.

You can get it for free