How do you cut a latex mattress when it s thick? How to cut the latex mattress into two if it is too

How do you cut a latex mattress when it's thick? It is necessary to find a professional cutting unit to cut. It's not good to cut it yourself.

How to cut the latex mattress is too thick and divide it into two methods as follows: 1, accurately measure the size of the bed 2, take a ruler to measure the mattress, mark it in the place that needs to be cut 3, take a long point to dismantle the imitation wooden board to make a ruler 4, use a paper cutter to slowly cut along the wooden board Note: You need to find someone to help fix the wooden board, so as not to slip off the wooden board and cause mistakes Latex mattress:

Natural latex mattress is the rubber tree sap collected from the rubber tree, through exquisite technology and technology combined with modern high-tech equipment and a variety of patented technologies to mold, foam, gel, vulcanization, washing, drying, molding and packaging and other processes to produce a variety of excellent properties suitable for the human body quality and healthy sleep of modern green bedroom supplies. They are extremely precious, as each rubber tree can only produce 30 cc of latex sap per day. It takes at least one to one and a half days to complete the production of a latex product, which is quite time-consuming and the material is precious.

Latex mattresses made of latex have high elasticity to meet the needs of people of different weights, and their good support can adapt to various sleeping positions of sleepers. The contact area of latex mattresses with the human body is much higher than that of ordinary mattresses, which can evenly disperse the bearing capacity of the human body, have the function of correcting poor sleeping posture, and have the effect of sterilization. Another major feature of latex mattress is that there is no noise, no vibration, which effectively improves sleep quality and good air permeability.

Summary. Latex mattress is too thick to cut into two bed method:

Measure the size of the bed accurately;

Take a ruler to measure the mattress and mark it where it needs to be cut;

Take a longer plank as a ruler;

Use a paper cutter to cut slowly along the boardNote: You need to find someone to help fix the board to avoid the board slipping and causing mistakes.

How do you cut a latex mattress into two beds if it's too thick?

Latex mattress is too thick to cut into two bed methods:1Measure the size of the bed accurately; 2.

Take a ruler to measure the mattress, and check the place where it needs to be cut and marked; 3.Take a long plank of the source of defeat as a ruler; 4.Slowly cut along the board with a paper cutter Note:

You need to find someone to help fix the plank so that it doesn't slip and make a mistake.

Thank you and hope mine helps you.

The mattress itself is 10 cm, I want to cut it into two 5 cm, what to do.

You can go directly to the furniture factory to cut.

Spend ten dollars, professional over there, and get it done in a few minutes.

Okay, thanks, I'm looking for the furniture factory.

Kudo, dear.

Summary. Hello dear, I'm glad to answer for you, the latex mattress is too thick, you can use a cutter to cut it a little thinner, and cut it to the right size you want. Hope it helps.

Dear, hello, I'm glad to be able to answer for you, the latex mattress is too thick, you can use a hail cutter to cut it a little thinner, and cut it to the right size you want to need. I hope I can help you.

Of course, the best way is to ask professional personnel, the key can be sent back to the manufacturer to re-brighten the town for rough cutting, after all, the manufacturer's machine is more professional, there will be no problem of burr edge, and the edge can also be sealed.

There is one more way:1Buy a 50 cm wire saw; 2.

Take out the latex pillow core and sell it; 3.Measure the thickness of the pillow core and determine the size of the thinning; 4.Find two wooden strips that need to be thinned and the thickness of the pillow core needs to be changed; 5.

Place the pillow flat on the table and place the wooden strips on either side of the pillow. 6.The wire saw can be sawed parallel to the wooden strip to open the pillow core.

I suggest you give one of the following options.

I bought it in Vietnam, and it is not very convenient to send it back to the manufacturer, it is a mattress, a very large one, 2 meters.

There is the best in the country, can you contact us?

Guizhou Lihang mattress ****.

You can go there and ask.

Summary. Dear, hello, the cutting method of the latex mattress is too thick is as follows: 1 Accurately measure the size of the bed, take a ruler to measure the mattress, mark the place that needs to be cut, take a long board as a ruler, and slowly cut it along the board with a paper cutter, 2

You need to find someone to help fix the plank to avoid the latex mattress from slipping off and causing mistakes; 3.It is difficult to cut by yourself, and without professional tools, it is best to take a professional cutting place to cut. This can effectively avoid losses caused by improper operation; I hope mine is helpful to you, and if it helps, feel free to give it a thumbs up!

Bow ninety degrees in thanks to <>

Hello, I have seen your question and am sorting out the answer, please wait for a while Oh Dear, hello, the cutting method of the latex mattress is too thick as follows: 1 Accurately measure the size of the bed, take a ruler to measure the mattress, mark the local stool in the place where it needs to be cut, take a long wooden board as a ruler, and slowly cut it along the wooden board with a paper cutting knife, 2You need to find someone to help fix the plank to avoid the latex mattress from slipping off and causing mistakes; 3.

It is difficult to cut by yourself, and without professional tools, it is best to take a professional cutting place to cut. This can effectively avoid losses caused by improper operation; I hope mine is helpful to you, and if you have help Tong Travel, feel free to give a thumbs up! Bow ninety degrees in thanks to <>

If the height of the latex pillow is designed, it is best not to cut it low, which may affect the effect of the latex pillow, if you must do that, it is recommended to cut it in a flat section, and now mark the part to be cut around the edge, and then cut it with a knife. From a medical point of view, the height of the pillow is 8 to 10 cm, preferably not more than 15 cm.

Although the height of the pillow that people need often varies from person to person, and is related to each person's height, fat and thin, narrow shoulder width, head circumference, and neck curvature, there is no certain standard, but the average person sleeps due to the use of supine posture for more time, and the general doctor will recommend that the height of a fist or more is appropriate, and it is not appropriate to reach the height of a fist and a half.

It is best not to cut the designed height low, so as not to affect the effect of the latex pillow. If you must do this, it is recommended that you cut a section of the plane, mark the part you want to cut around the edge, and then cut it with a knife!