How to adjust the drift of the silver carp in floating fishing, how to adjust the drift of the silve

When floating fishing for silver carp, we should first pay attention to the choice of float, and a suitable float is the key to floating silver carp fishing. At least require a float with a large amount of lead, first of all, only a float with a large amount of lead is suitable for fishing, and secondly, it is easier to cast the rod accurately, and it is often necessary to use a longer rod when fishing for silver carp, and the size of the silver carp will be much larger when fishing farther.

In fact, bighead carp almost never feeds on the sidelines, in any season and in all weather conditions, so deep fishing is the norm. Secondly, it is necessary to pay attention to the turning speed of the float, so the float with a longer drift foot is generally used. In order to facilitate the fishing float, the drift adjustment does not need to be adjusted to the drift body, and the float with a longer drift tail should also be used.

The drift tail must be relatively clear, because the drift is not obvious when fishing for silver carp, and the fishing spot is far from the shore. Such a float with a large lead eater, long legs and long tail will also have better stability when fishing for floats.

The drifting method of silver carp fishing is actually very simple, but it should be combined with the fishing method to adjust the drift reasonably. First of all, when fishing for silver carp, it is generally used to hang only one bait to fish, which is the result of many veteran fishing drivers. Because the silver carp is a filter-feeding fish, it does not really eat the hook and bait in the mouth, but inadvertently drinks the hook when drinking water to filter the food.

Therefore, when the bait is atomized, the silver carp will filter the tiny particles that have sunk under the bait, and in the process, the hook will be inadvertently drunk. In this way, there are several key points to pay attention to when fishing for silver carp, the line must be soft, and the hook must be large but not too heavy, otherwise it is easy to "drink" the hook into it.

Drift adjustment method for silver carp floating fishing:

1.Heavy lead bottom-up.

Even if it is a fishing float, finding the bottom can not be omitted, and the only thing to pay attention to when finding the bottom of heavy lead is to try not to hit the full rod. Fishing for silver carp should first hang a double hook, and ensure that the distance between the two hooks is about 10cm, and then hang a heavy lead on the lower hook, and then try to float the fish to the hook, so that the fish float completely sinks into the water, and then gradually move up the float until the tip of the drift is exposed, which means that the bottom is found.

2.Cut the lead skin.

Anglers keep trying to subtract the lead until the tail of the float is about 8 mesh out of the water.

3.Drop-down floating.

Pull down twice the length of the strand. The purpose of pulling down the float is to ensure that the distance from the hook to the tip of the float is less than the depth of the water.

4.Hang the bait to adjust the drift.

Although it does not need to be as fine as the drift of the platform fishing, anglers should also pay attention to the fact that they must hang the bait to adjust the drift, so as to ensure that the bait is suspended in any water layer. If the float sinks too much after hanging the bait, the angler should continue to cut the lead skin until the float is exposed to the surface of the water.

Precautions for float fishing for silver carp:

At the beginning of silver carp fishing, anglers should mainly hook the bait, and have a certain frequency of rod hitting, to ensure that the formation of an atomized three-dimensional fish attraction area near the underwater hook bait. If it is found that there is a silver carp into the nest, you only need to hook a single bait, and the hook does not need to hang a bait, so as to ensure a certain rate of catching fish, and the float should be about 5-6 meshes.

In addition, for elderly anglers, in order to be less tired and facilitate the loading of bait and slow down the time of rod lifting, you can choose to add a small spring under the front lead seat to ensure the retention of bait and slow down the atomization speed of bait.

1. Hanging bait drifting: hanging bait drifting is a commonly used drifting method for silver carp floating fishing with hand rods, the specific operation in Lingzhou is to find the bottom of the heavy lead first, and then trim the lead skin in half water until the float exposes 2 3 meshes, and gradually look down to find the fish layer from the water depth of 1 meter when fishing, until it can stabilize the fish.

2. Empty hook drifting: Empty hook drifting is a commonly used drifting method for hand rod floating fishing silver carp ruler leakage, the specific operation is to find the bottom of the heavy lead first, and then trim the lead skin in half water until the float is exposed above 4 6 meshes, which can be lowered when hanging small bait, and high when hanging large bait.

If the float does not sink after slowly ascending, or does not float after the float slowly sinks, the rate of fish in the rod is very high. The float slowly floats up 1 2 meshes, and then there is a powerful downward pause, at this time the fish rate in the rod is very high and most of them are positive. The float jumps up and down within 1 mesh, and this drifting phase indicates that the silver carp is devouring the bait and can lift the rod to sting the fish.

The method of floating fishing for silver carp is as follows:

Although the proportion of bait used when fishing for silver carp is relatively small, but the bait group is relatively large, so the overall bait weight is still relatively heavy, and only the large amount of lead can be suitable for fishing. It is recommended to eat at least 2 grams of lead, and there are 2 benefits to eating a large amount of lead.

First, it is easier to cast the rod when fishing with a long rod to reach a deep fishing point, and the second is that it has better stability and has a certain windproof ability, especially when fishing for silver carp in a breezy weather, it is more recommended to fish the downwind position, because this position is affected by the wind, and the algae will be more abundant. The amount of lead eaten is actually the most critical point in choosing floats for recreational wild fishing.

The drift tail should be longer, not only more suitable for fishing, but also the part that is "buried" underwater when fishing is longer, and the stability and windproof ability will be better, that is to say, the longer the float, the better the stability, and the more suitable for wild fishing. The drifting tail must be relatively clear, because although the bighead carp is large, it does not eat much, and the drifting caused by it is often not obvious.

If you have the conditions, you can also try the float of small broken objects, which is easier to detect the float action. The drifting feet can be slightly longer, and the turning over will be faster. As for the method of drifting, the early limb is very simple, you can try to adjust a higher number of meshes, and there are still meshes after hanging the bait.

Or it is half-water with bait to drift, and it is enough to hang bait in a half-water state and float with mesh.

Bighead carp fishing is a high-tech fishing sport, and drifting is also a very important part. Below I will show you how to adjust the drift in order to improve the effectiveness of silver carp fishing.

First of all, silver carp fishing requires the use of a flotation device, which is generally recommended. Before adjusting the float, you need to choose the appropriate float model. When choosing a float, you should choose it based on factors such as the weight of the fishing rig, the depth of the water at the fishing point, and the strength of the current.

Secondly, the hook needs to be fastened before the drift is carried out, and then the float is assembled. When adjusting the drift, it is necessary to adjust the current and brightness of the fishing spot. Generally speaking, when the current is strong, you need to choose a larger float to better control the sinking speed of the hook.

In the case of lower brightness, you need to choose a brighter floater to better observe the movement of the float.

If the float sinks too fast, you can increase the buoyancy at the tip of the float or shorten the length of the line to slow down the sinking speed of the pants. Conversely, if the float sinks too slowly, you can reduce the buoyancy at the tip of the float or increase the length of the line to speed up the sinking.

In addition, there are some details that need to be paid attention to when fishing for silver carp. First of all, the depth of the float should be adjusted according to the activity of the fish, usually silver carp like to move on the bottom of the water, so adjust the float below the bottom. Secondly, when fishing for silver carp, it is necessary to observe the movement of the float at all times, and adjust it in time once the float is found to be abnormal.

In general, a variety of factors need to be taken into account, including water depth, current, hook weight, etc., and continuous trials and adjustments are required to achieve the best results.

1. Find the bottom of heavy lead.

Even if it is a fishing float, finding the bottom can not be omitted, one is for the sake of safety for Huina, to ensure that the next few steps are not wrong; Second, it is convenient for us to change the water layer when there is no mouth. The only thing to pay attention to when finding the bottom of heavy lead is to try not to hit the full rod!

2. Pull down to float, pull down twice the length of the strand.

How far is the pull-down float in the end? Some people say that the gallic line is pulled down by ten centimeters, which one is right? In fact, it's all right, the pull-down float is to ensure that the distance between the hook and the tip of the float is less than the water depth!

For example, in the picture below, make sure that the rig is in this state in the water before you cut the lead skin.

3. Cut the lead skin to expose some meshes of the float.

This step is only coarse, so it doesn't matter how many eyes are exposed on the float, of course, experienced old anglers will directly adjust the whole mesh (because the silver carp bait is relatively large, it can press down a lot of mesh).

4. Hang the bait on a single hook, and then cut the lead skin.

For example, in the third step, you cut the lead skin to expose the float to 8 meshes, then when you hang a big bait, you will find that the float is completely dragged into the water again. At this time, it is necessary to cut the lead skin again, until the float is exposed to the water again, generally speaking, it is enough to show three or five eyes.

Fishing for silver carp is generally a method of drifting with a single bait in half water.

Semi-water drifting is to first hook up the heavy lead to find the bottom, and then lift the drift body up to just parallel to the water surface. Then pull the drift down to half the distance from the previous bottoming. Start cutting the lead skin until you float to expose 8 meshes, and then hang the bait and fish 3 meshes.

It is recommended to keep the fishing target low after hanging the bait, so that it is easier to observe a slight drift. When fishing for silver carp, the method of drawing the nest is generally used to gather fish, and the method of hanging double bait will be used at this time, and the single bait drift does not have any effect on the nest. Because the bait is generally pinched into a triangle when pumping the nest, and the rod is lifted after the bait enters the water, there is no situation where there is no mesh for hanging double bait.

The drift phase of the silver carp is not obvious, and the best fish rate is Xiaodunkou, which is a sign that the silver carp drinks the hook when it "drinks" the suspended particles in a large mouth, so the fish rate in the rod is relatively high at this time; And all the pauses in the dynamics are also eaten by the silver carp. For example, the float that would have been sinking has stopped, and the float that has been slowly ascending has stopped.

Bighead carp fishing is mainly for float fishing, because bighead carp is a typical pelagic fish, and the temperature affects the water layer where the bighead carp is located. The temperature is high and the wind is light, so it will generally be in very shallow water layers, and vice versa, in deeper water layers. Therefore, according to the water temperature and temperature conditions when fishing, a fishing water layer should be reasonably booked, and then the water layer should be adjusted according to the situation.

The drifting method of silver carp fishing method can be used to hang bait drift method, no bait drift method and so on.

1. Hanging bait drifting method.

Usually use a semi-hanging water double bait, and the adjustment of 1 2 mesh is just right when the water surface is exposed. Anglers should note that the half water here refers to the half of the water layer depth of the fishing flap cree, not half of the real water depth. When fishing for fresh fish, remember not to fish from the depths of the water in which you are actually fishing.

For example, when the depth of the water itself is about the same, there is no need to fish for floating. If the water is deep, fish in the pelagic layer of the water. In addition, due to the daily temperature, air pressure and water pressure, the water layer in which the fresh scales live is also different, so fishing Xianjing must constantly explore to determine the best water depth.

2. Do not hang bait drifting method.

Usually it is enough to let the fish float out of the water 7 or 8 mesh. In addition, if the drift tail is relatively thick, 6 mesh is also possible. There is also the liquid hall, if the angler wants to save the bait, it will be lowered.

If you want to hang a large bait, you can't adjust it too low, otherwise if you hang the bait slightly, the fish will sink into the water.

The process of adjusting the drift:

1. Heavy lead bottoming: add a large lead skin on the lead seat and throw it into the water, the float will be completely submerged in the water under the gravity of the lead sinker, and then lift the rod to pull the float up until the float is level, at this time the distance from the lead sinker to the top of the float is roughly the water depth of the buried person.

2. Half-water mesh: the distance of the float pull-down is greater than the length of the float plus line, and then trim the lead skin until the float is exposed to the number of meshes you want to adjust, for example, adjust the 4 mesh to cut the lead skin to the float exposed to the water surface 4 meshes, at this time, the gravity of the lead sinker is roughly equal to the buoyancy of the float.

3. Hanging bait weight: the hook hangs the bait into the water, and the number of meshes that floats down at this time is the weight of the bait, for example, the empty hook is 4 mesh, and the float is exposed 2 meshes after hanging the bait, indicating that the weight of the bait is 2 mesh, in order to ensure the sensitivity of the bait size should be uniform.

4. Adjust the fishing mesh: hang the bait and pull the floating material potato to make the floating reveal the number of meshes you want to fish, for example, the empty hook is adjusted to 4 meshes, the bait weight is 2 mesh, the floating float exposes more than 2 meshes belong to the fishing blunt, the floating just exposes 2 meshes belong to the ineffective and not dull, and the floating float exposes the following 2 meshes belong to the fishing spirit.