-
Guppy tanks have white flocculents, usually bacterial films, and this substance usually does not need to be treated because it will disappear on its own as the water quality slowly stabilizes.
If you feel that the bacterial film is too ugly, you can also consider cleaning it off, and there are many ways to clean it:
1.Keep the tank away from sunlight and then reduce the amount of feeding.
2.The fish tank can be cleaned and new water can be added.
3.You can drain the water from the fish tank, then clean the fish tank and add new water.
4.You can drain the water from the fish tank, then clean the fish tank and add new water and put in some aquatic weeds.
5.The tank can be cleaned, then the amount of food can be reduced and new water can be added.
6.The fish tank can be cleaned and new water can be added, along with some aquatic plants.
7.The fish tank can be cleaned and new water can be added, along with some aquatic plants.
In conclusion, dealing with white flocculent in fish tanks requires specific measures to maintain healthy water quality.
-
1.The white flocculent matter in the fish tank is generally a bacterial film, which does not need to be treated and will disappear after three months.
2.The bacterial film generally appears when the tank is opened, because the ecological cycle in the tank is not perfect, so that they have a chance to grow, and as the water quality slowly stabilizes, a good ecosystem is formed.
After that, the bacterial film will gradually disappear.
3.If you feel that the bacterial film is too ugly, you can also consider cleaning it up and putting a few black-shell shrimp.
That's it.
-
It may be albumin, fish scales and other self-shedding products, bacterial film
1. Albumen worms.
Albumins are produced due to over-fertilization of water, and if there are too many albumen worms, they will affect the fish, so if they are found, they should be dealt with immediately.
2. Fish scales and other self-shedding objects.
This situation can generally be seen from whether the fish has lost its scales. Most are water mildew. Water mildew often causes tissue damage on the surface of the fish and forms a grayish-white batting-like covering in the water.
The disease is mainly prone to disease when the water temperature is low, so increasing the temperature of the water is the key to the disease.
3. Bacterial film. The white flocculent in the fish tank is generally a bacterial film, which is harmless to the fish, and it can be cleaned up, and it will disappear after a period of time if it is not cleaned.
How to clean up white flocculents
Clause. 1. Whether it is protein worm or water mold, it is necessary to strengthen filtration, and the filter cotton should be cleaned and dried regularly;
Clause. 2. Conditional aquarists can let the fish tank receive appropriate sunlight, and if there are no conditions, you can choose the ultraviolet germicidal lamp to turn on regularly;
Clause. 3. Pay attention to controlling the water temperature, the protein worm has its own intolerant temperature range, and the temperature can be adjusted appropriately when the fish can tolerate it;
Clause. Fourth, increase the number of clean fish, this is not much to say. However, before you buy clean fish, you need to pay attention to whether your own fish species can coexist with clean fish. Don't ignore that.
-
Change the water, the white flocculent material present in the fish tank may be mycelium, and the water needs to be changed in time to improve the water quality after being found; Heating rod can be installed in the tank after changing the water, and a small amount of salt can be added to sterilize, so that the fish can resume growth as soon as possible in a high temperature environment; Medicated bath**, if the condition does not improve, you need to put potassium permanganate solution into the tank for medicated bath, soak for 30 minutes every day.
The white flocculent presence in the fish tank may be mycelium, and the water needs to be changed in time after being found, which can effectively improve the water quality, so that the fish can be used as soon as possible, and can also reduce the number of harmful bacteria in the tank to avoid the continuous deterioration of the condition. Note that the water needs to be changed every 1 day for better results.
After changing the water, you can place a heating rod in the tank to properly raise the water temperature, which can promote the metabolism of the fish and allow harmful substances to be discharged from the body as soon as possible in the environment of high water temperature. Note that bacteria often multiply in large numbers in high temperature environments, so in order to avoid bacteria from invading the fish, a small amount of feeding is needed into the water for sterilization.
If the condition of the fish does not improve after warming and changing the water, it needs to be carried out by medicated bath**, and can be soaked in povidone solution, with 20 mg of medicine per liter of water. Potassium permanganate solution can also be diluted with water, and the diseased fish can be put into the tank for soaking, and each soaking is often controlled within 30 minutes.
-
The white flocculent in the fish tank may be caused by the fish eating too much, and the fish is too full to secrete protein water, which will produce protein worms. When fish have water mold, they will also secrete white flocculents. In the first three months of the new cylinder, the cylinder will generally be attached to the white bacterial film.
If in the process of raising fish, there is a situation where there is white flocculent in the fish tank. It may be that when the fish is fed too much, the fish will secrete albumen water, and the white flocculent may be the protein worms produced by the albumin.
However, if the fish is injured or the scales are falling off, then the fish may suffer from water mold due to bacteria in the water invading the fish, and when the fish suffers from water mold, white flocculent will be produced on the body.
The newly bought fish tank or the decorations in the fish tank will also have some white bacterial film attached to it in the first three months of the fish tank, but this bacterial film generally does not have any effect on the fish in the tank, and it does not exist for a long time.
-
It is nitrifying bacteria, it is divided into three layers, the outermost is the white flocculent matter that the landlord said, it is the embellished organism of nitrifying bacteria, just like fish eating something to defecate, but the stool of nitrifying bacteria is not bad for fish and grass, the second layer is aerobic bacteria, and the innermost layer is anaerobic bacteria. It is recommended not to use filter cotton to clean these things in the future. If you want to clean it, buy a tank wiper so that you don't waste nitrifying bacteria, although it only takes 7 to 10 days to re-establish a good digestive system, but at least ensure the stability of water quality.
Don't be surprised if it's wrong.
-
There is white flocculent on the fish, which is caused by water mold, and Yu Yue shared a simple solution in the kitchen.
I have white hair.
White hair disease, also known as water mold, is one of the most common diseases of ornamental fish. >>>More
Q1 I analyzed the reason is very simple: the nitrification system is unstable, and the pressure of the nitrification system is high, and the biochemical filtration is not thorough. >>>More
Some friends who often drink alcohol, it is not difficult to find some flocculent sediment in the wine, and many drinking friends say, what are these flocculents? >>>More
There may be one of the following reasons for the presence of white flocculent in the water in which horned frogs are raised: >>>More
The appearance of white flocculent in drinking water should be caused by excessive mold, yeast and total number of colonies in drinking water. At this time, the quality of the mineral water has changed, so it is best not to drink it. >>>More