Buy tiles and send water retaining strips

Do the math how much it will cost you to renovate your home

If you have this aspect of the need for the owner, you can negotiate with the business, or you can buy tiles when the business is engaged in activities, so that it is not only cheaper, but also can give away water retaining strips and other items, but you must pay attention to the following problems when buying tiles:

1. See if the appearance is straight.

The appearance is something that can be seen at a glance, if the appearance can not be flat, it means that there is a problem with the quality of this product, it is not recommended to buy, otherwise the good construction personnel will not be able to pave the smooth effect.

2. Look at the surface of the tile.

When choosing, in addition to looking at whether there are pinholes, spots, and ripples on the surface, we should also see whether the product is suitable and whether it meets your own requirements.

3. Look at the tile pattern.

When choosing, it is necessary to observe the color and pattern, usually good products, colors and patterns are more realistic and delicate, while inferior products may have problems such as lack of color and roughness.

4. Look at the color on the back of the tile.

When choosing, you should also check the color of the back of the product, if it is red, it means that the product is glazed tile, if it is milky white, it means that the product is vitrified tile.

5. Listen to the timbre of the tiles.

When choosing, you should hold the product in one hand, bend the fingers of the other hand, and then gently tap the surface, if the sound is crisper and louder, the quality of the surface product is better, otherwise the quality of the surface product is poor, and it is not recommended to buy.

Enter the area and get the decoration for free**].

Buying tiles generally does not give away edge strips andFloor drains

Buy ceramic tiles and give away edge strips and floor drains, such a situation should be held at the time of the event to have such a gift.

Most of the gifts are not very good quality, so you don't need to care too much about such gifts when buying tiles, but you should negotiate with the merchant on the goods, which is much more affordable than the gifts.

We know that the water retaining strip is installed in the bathroom, generally speaking, the installation of the water retaining strip in the bathroom can play a role in separating dry and wet, but it is not in place when designing, and there is no way to install it so reasonably. Let's introduce to you how to install water retaining strips after the tiles have been paved.

Put the water retaining strip on the brick surface you want to lay, thicken the low side, or open cement to fill the gap directly, no matter what method is used, as long as the upper surface of the water retaining strip is made horizontal, you can install the shower room.

How to install the water retaining strip.

1. Overall installation.

Generally, when we are laying wide grinding bricks for the bathroom, we need to install a water strip in the position of the empty hall. Wait until they are flattened with cement mortar, and then put in the retaining strips. Then we need to build the retaining strip with bricks to create a shape, and then the marble or floor tiles can be laid.

Many people like to install the water retaining strip upright, but in fact, it is not a necessary process at all. For most bathrooms, just more than two centimeters is sufficient. If the general water surface reaches two centimeters, and the floor drain has not discharged the water, it is not a problem of whether the drainage is in place, but a problem in other aspects.

2. Installation method.

For those shower rooms as a whole, we need to consider all their dimensions before the water and electricity are installed. Before buying a water retaining strip, you need to contact the merchant and explain the situation carefully so that the merchant can prepare a water retaining strip of sufficient size.

For those shower rooms that are simpler, we need to bury the water retaining strips in before they tile them. In this way, even if it takes a long time, no one will seep out, but he also has his own disadvantage, that is, it is more difficult to replace the water retaining strip.

3. Installation effect.

For most families, the bathroom is an extremely important place. The separation of dry and wet in the bathroom is also a headache in everyone's daily life, and if we take a shower at home every day, the faster the water is drained, the better. The existence of the water retaining strip is to make the bathroom relatively dry.

If there is a shower curtain at this time, then the effect will be even better, and we need to think about it.

Summary: About the tile has been paved how to dress up the water strip related content on this, you can refer to the above methods to install the water strip, in the installation of the details of the processing can be, so that it will not affect the overall appearance.

In life, in places like the bathroom, where there is a lot of water, there is often water flowing to other places, so it is more troublesome to clean, so many people want to install water retaining strips on the tiles. The tiles have been paved, and it is impossible to remove and reinstall them, so how to install the water retaining strip, let's take a look at it next.

First, the tile has been paved how to install the water retaining strip.

1. The tiles have been paved and they don't want to pry the tiles open and install the water retaining strips, which is also a more troublesome operation. Therefore, there is a self-adhesive water retaining strip on the market, which does not need to pry the tile open and install, and can be directly glued to the ground.

2. Buy a self-adhesive water retaining strip to install, first measure the size of the room, calculate the length of the water retaining strip that needs to be installed, and then cut the water retaining strip according to the calculated length.

3. Before carefully installing the water retaining strip, you must clean up the ground with a wide smile, and make sure that there are no impurities such as dust and oil stains on the tile, otherwise the paste of the water retaining strip will not be firm.

4. Mark the ground with a pen and draw the place where the water retaining strip needs to be installed. Then tear off the thin paper on the layer of the water retaining strip pasted, paste it according to the position of the drawing, and press the water retaining strip hard for more than 5 minutes after sticking, so that the water retaining strip can be pasted more firmly.

5. Finally, fill the joints of the water retaining strip with some sealing glue to prevent water from flowing out of these gaps.

2. Precautions for installing water retaining strips.

1. Before installing the water retaining strip, you must measure the size and plan all aspects to prevent the length of the water retaining strip from being insufficient during installation.

2. Before installation, the ground tiles must be cleaned and cleaned, if there is dust and oil on the tiles, and other garbage, it is more difficult to stick firmly, so that the water retaining strip is also relatively easy to fall, and it can not play a role in retaining water.

3. After the water retaining strip is pasted, be sure to press hard for more than 5 minutes to make it paste together with the ground more firmly.

4. After the water retaining strip is pasted, there will be some seams, and there will be gaps in these places, and it is easy to flow water, so you must not forget to seal it with glue.

Article summary: In the case that the tile has been paved, it is best to use the self-adhesive water retaining strip, cut the length of the water retaining strip, clean the ground, and then paste the water retaining strip on the field surface, press hard, and finally fill the joint with glue. The above is the relevant content introduced, if you want to know more about related content, please continue to pay attention to Qeeka Home.