How to repair the paint after the car has fallen off, and if the car has lost paint, where can I mak

If the area is small, directly touch up the paint pen. According to your ** look, the black you see out here is not a primer, but plastic! You thisBumpersThe outer skin is actually plastic, so even if the paint is scraped off, it will not rust, and you can just touch up the paint pen and deal with it.

The car paints off millet grains.

Large, relatively small, can be handled in the following ways:

1. Tool: a paint pen.

The touch-up pen is a car scratch repair tool that is suitable for small areas of paint peeling and scratches. By selecting the right model according to the original color of the paint, you can repair, cover up and fill in the scars.

2. Tools: nail polish.

One bottle. <>

Choose a nail polish color similar to the color of the car paint and then gently apply it to it.

3. Tools: a box of wax and a sponge.

You can apply the wax evenly with a sponge, wipe it in a straight line with the mixture, and then wax it in the same direction, and the slight paint loss can be easily repaired.

4. Tools: a toothpaste, a towel.

Just apply the toothpaste to a towel and wipe off the paint, but remember not to buy granular toothpaste, which will make the paint fall bigger and bigger.

5. Tools: a cup of Coke, a towel.

It should be noted that the Coke touch-up needs to be similar to the color of the Coke. Dip a little cola with a rag and wipe the paint off a few times, and you will find that the paint has become difficult to see.

Minor scratches to the paint surface are on the surface layer and can be repaired by waxing.

There is also a toothpaste repair, gently apply to the shallow scratches, and then wipe counterclockwise with a soft cotton cloth, several times, not only to reduce the scratches, but also to avoid the erosion of the air on the car paint wounds.

For more serious scratches, if you can see the color of the lower primer, then you have to look at the more serious scratches of the scars, the bottom of the primer is the steel plate, do not rush to wax, wash it first with a paint pen (scratch repair pen) to touch up the paint, completely cover the steel plate, dry and then wax and polish. If you don't have a paint pen, you can use toothpaste first, and the method is as above, and the toothpaste has a certain anti-rust effect. If the bumper is damaged, you don't have to worry about rust, because the bumper is plastic.

The steel plates have begun to rust. This uses fine sandpaper, first use the fine sandpaper to polish the rust, remove the rust and smooth the scratches, and then refer to the fourth case.

Leakage primer over a large area. This kind of suggestion to re-paint, if you choose not to repair the insurance problem, you can do anti-rust treatment (toothpaste) first, and then apply a layer of wax, and try to repair the repair, at this time you can choose the coarse wax with the largest grinding particles, if there is no water wax.

It is not recommended to repair the paint by yourself, but if it is particularly small, it is also possible, and it is not recommended to damage the original car paint in a large area, and it is not easy to deal with the paint in the later stage! Hope! Thank you!

1.Buy touch-up pens. This can be purchased at a car repair shop or online, close to the color of your car, refer to the instructions above ,..

2.Self-spraying touch-ups. If the paint peeling area is relatively large and there is no time to repair it, you can use the self-spraying paint ,.. corresponding to the color of the car paint

3.White toothpaste repair method. For areas with little paint loss and slight scratches that are not obvious, you can use toothpaste to apply ,..

4.If the damage is severe, it is recommended to go to a car repair shop to repair the paint. Waxing, polishing, repairing. If the paint is darker,..

5.Professional paint treatment. If the paint peeling is so severe and the area is large, the entire piece of paint needs to be repaired, sheet metal or sprayed.

Hello! You can go to the online or physical store to buy a touch-up pen of the same color, and use the touch-up pen to see the damaged area to touch up the paint.

Hope it helps, hope!

Hello, the current number of people consulted may not reply in a timely manner, if it is a vehicle failure problem, it is recommended to use the computer to detect the specific cause of the failure, search for "car master" can consult car problems at any time, 24 hours ** answer.

The car has lost its paint, and you can just go to a car repair shop and finish the paint touch-up.

English name: paint or coating. Paint is a chemical mixture coating that can firmly cover the surface of objects for protection, decoration, signs and other special purposes.

The authoritative book "Coating Technology" in China's coating industry is defined as follows: "Paint is a kind of material, which can be coated on the surface of objects with different construction techniques to form a solid film with firm adhesion, certain strength and continuity. The film formed in this way is commonly known as a coating film, also known as a paint film or coating.

Coatings are generally composed of four parts: film-forming substances, fillers (pigments and fillers), solvents, and additives. Depending on the performance requirements, sometimes the composition will change slightly, such as no pigment and filler in the varnish, and no solvent in the powder coating.

Fields of application. Paint is an ancient name; Coating, is the name of modern civilization, contains more scientific and technological components, and is widely used in modern science and technology and industrial fields. However, there are some customary names for paint that are still retained, such as latex paint, primer, topcoat, etc.

Generally speaking, a coating is a material that can be applied to the surface of the coated object and can form a continuous film that adheres firmly. It can be both inorganic, such as electroplating copper, electroplating nickel, electrogalvanizing, etc. It can also be organic, such as most organic polymer materials, which constitute a major part of today's coatings market.

If it's no problem to spray paint, if it's your own touch-up paint pen, you can't do it, you can try to polish it with fine sandpaper with touch-up paint pen.

The pro x09 conversation is in the queue for manual answers. We're glad to answer your question! The time limit for replying to the platform is 24 hours!

Your problem needs to be typed, so you need to wait patiently, Xiaomi will sort out the plan for you immediately! 珞

Hello dear, the following answers have been made to your questions, and I have helped you sort it out! That's it, dear!

1. Professional 4S shop.

The first place that comes to mind after scratching the car must be the 4S shop, but because it is carried out in the standard inkjet workshop, with the same color number produced by the manufacturer, the use of well-known brand paint, professional technology, and a complete set of heating, airflow adjustment, ventilation system, there are paint isolation filters, carbon filters, suction devices, pressure gauges and other professional devices to repair the paint, resulting in the expenditure of ** is too high. Generally, according to the ** of the vehicle itself, it is 500-1000 yuan to make up a surface.

Car touch-up paint go**, how will you choose.

2. Boutique car beauty shop.

Secondly, the place that may be considered is the nearest boutique car beauty shop, such a place is weaker than the 4S shop repair paint environment, the paint used may not be consistent with the car itself, the experience level of the paint repair master is not the same, plus the maintenance skills and equipment are also different. Generally, according to the ** of the vehicle itself, it is 300-500 yuan to make up a surface.

3. Roadside shops.

This kind of small shop touch-up paint environment is extremely poor. If there is a big truck passing by or there is a strong wind, the dust and debris may pounce on it, the effect of touching up the paint depends entirely on luck, the master with good craftsmanship is lucky, and the novice intern is unlucky, and then because the price is low, so the choice of paint products is relatively cheap, there will be color difference. Generally speaking, making up a noodle ** ranges from 100-200 yuan.

Refer to it. Hope it helps.

The car has lost its paint, and you can just go to a car repair shop and finish the paint touch-up.

Repair the paint to the 4S shop or.

Garage.

It's all okay, if you want to make up for a better effect, it is recommended to go to the 4S store.

Necessary materials: rags, spray paint, sandpaper, protective tape.

1. Use a wet rag to treat the floating soil that needs to be repaired in order to improve the adhesion of the paint, as shown in the figure below;

2. Use sanding paper to smooth the scratch part until you feel that there is no unevenness with the surrounding paint surface with your hands, as shown in the figure below;

3. Prepare protective tape and rags to block the places that do not need to be touched-up to facilitate the painting operation, as shown in the figure below;

4. Start spraying paint, spraying out the paint, which can make the paint of the car body more flat, when spraying paint, pay attention to spraying back and forth, do not aim at a fierce spray. until the color covers the black area, as shown in the figure below;

5. Finally, the effect of complete construction, only the color selection is correct and the difference between the original car is not big, as shown in the figure below.

The car has lost its paint and repaired the paint as follows

1. First of all, we need to use a wet towel to scrub the scratched area and the surrounding area.

2. We use No. 800 sandpaper to polish and smooth the scratching place, then scrub it with a wet towel, and finally dry it with a dry towel. If the scratch is deep and cannot be smoothed with sandpaper, then we need to fill it with soil to make the part of us hang and the body around the scratch smooth. Be patient when filling the soil, and fill it in small quantities several times until the scratches are filled.

3. Use No. 2000 sandpaper to polish the area around the scratch until it is matte, then clean the surrounding area and wipe the polishing area dry with a dry rag. Use tape or newspaper to cover areas that don't need touch-ups, and remember not to cover areas that need to be painted to avoid patches.

4. Before use. To shake the primer evenly for about 30 seconds. When painting, it is about 20 inside the body, and it is necessary to move the paint back and forth in a small number of times, without spraying a layer, and it will take about 5 minutes to spray the next layer after the paint is dried.

5. Wait for 15 minutes to spray pearl paint, mainly play a role close to the original car paint, pearl paint does not need to be sprayed many times, it looks close to the original car paint.

6. Spray barge gold oil, pay attention to about 10 to 15 cm away from the body, spray slower, the same as painting, wait for a layer to dry and then spray the next layer. until the vehicle is shiny.

Pacific Auto Network has a lot to do with the condition of the car and the location of the damage. If the damage to the paint does not see the aluminum alloy inside, you can apply toothpaste to a towel and wipe the scratches on the body vigorously, at this time these small scratches will disappear, but do not buy granular toothpaste, which will make the body marks bigger and bigger.

According to the different degrees of scratches in the car paint, different repair methods can be appropriately selected, and the body can be restored at the lowest cost. It can be divided into three degrees, slight scratches on the body, damage to the body topcoat and damage to the body primer or even deformation.

1. Slight scratches on the body: If it is only a slight scratch on the body, that is, the scratch only hurts the most superficial layer and is not deep, this can actually be repaired by waxing.

Second, hurt the body paint: if the scratches are deep, and part of the topcoat has been hung up, but there is no damage to the base paint and deformation, then you can repair the paint to restore the paint surface, it is relatively simple and fast to buy a paint repair pen, and then according to the tutorial to touch up the paint.

3. Injury to the body primer or even deformation: If this is the case, then it means that the scratch is already very serious, and if it is not treated in time, it will develop into rust in the future. To repair the undercoat and deformation, the paint is sanded off, the sheet metal is repaired, and the coats of paint are reapplied.

Photo by Chen Jie 2).

This has a lot to do with the condition of the car and the location of the damage. If you don't see the aluminum alloy in the paint, you can apply toothpaste to a towel and vigorously wipe the scratches on the body. At this time, these small scratches will disappear, but don't buy granular toothpaste, it will make the body marks bigger and bigger.

Depending on the degree of scratches on the paint, different repair methods can be selected to repair the body at the lowest cost. It is divided into three levels: minor scratches on the body, damage to the body paint, damage to the body primer and even deformation.

1. Slight scratches on the body: If there is only a slight scratch on the body, that is, the scratches only hurt the surface layer and are not deep. This can actually be fixed by waxing.

2. Damage to the car paint: If the scratch is very deep and part of the car paint has been hung, but it does not hurt the primer and does not deform, then you can repair the car paint and restore the paint surface by yourself. It's easier and faster to buy a touch-up pen and follow the tutorial to fix the paint.

3. Body primer damage or even deformation: If this is the case, it means that the scratches are already very serious, and if not treated in time, they will develop into rust in the future. To repair the primer and deformation of the body, it is necessary to first grind off the paint on the corresponding parts, then repair the body with sheet metal, and finally reapply each layer of paint.