Is Pushu bonsai hardy, and is Pushu bonsai easy to raise

Hello friend. Pu tree is a cold-resistant tree species, in the winter at a low temperature of about minus 10 degrees can also safely overwinter, strong adaptability to the growth environment, in addition to cold resistance, but also heat-resistant, shade-resistant, drought-resistant, moisture-resistant, etc., is a transplanting survival rate of the species, in the last ten years the market demand of the tree is increasing, often used for street tree landscaping, for the air harmful substances purification effect is obvious. At the same time, the oak tree is also an excellent bonsai material variety.

Hope it helps.

Pu tree, also known as sand tree, green tree, thousand grains tree, deciduous tree. The branches of the Pu tree are stretched, the posture is simple and elegant, the stem shape is straight, the leaves are emerald green, after the leaves fall off in winter, it can be used as a cold tree to watch, there is a special interest, as shown in Figure 3-28 for the Pu tree pot manuscript to sell the scene.

1 Material Selection.

The materials used to make bonsai can be obtained by cuttings, sowing, digging in the field, and purchasing. When pruning the bonsai in spring every year, the cut branches are inserted in the seedbed to keep the potting soil moist, and new roots can grow after 30 days, and after two years, it can become a good material for making small bonsai.

2 Bonsai modeling.

The shape of the Pu tree mostly uses the coarse and fine cutting method, while the Lingnan school of big tree processing key core teasing completely adopts the pruning method, imitating the Lingnan painting technique, paying attention to the cutting skills, storing branches and cutting off, and attaching importance to the overall composition effect.

Pushu bonsai is suitable for making straight dry type, oblique dry type, curved dry type, horizontal dry type or attached stone type. The branches and leaves can be tied or pruned into a steamed bun-like round, or processed into a natural tree shape.

3 Bonsai maintenance.

1) The light of the tree likes light, should be placed in a place with sufficient light and good ventilation for maintenance, and there is no need for shade in summer. If there is not enough sunlight in the wet and humid places, the root system will not develop well and the growth will be poor. In the southern winter, it can be overwintered in a leeward and sunny place with a pot, and it should be placed in a low-temperature room for wintering in the northern winter.

2) Watering trees have a certain drought tolerance, and the potting soil should be kept moist during the growing season, but no water should accumulate in the pot. In the hot summer, water thoroughly in the morning and almost no water in the evening. Water less in winter, and don't water if the potting soil is wet. Yoshiyama Huayao.

3) Fertilization of the vineyard can not be used with large fertilizer, in spring and autumn once a month to apply rotten thin organic liquid fertilizer, in the hot summer, cold winter do not fertilize.

Pushu can not only be used as a bonsai, but also an extremely good material, as far as I know, excellent bonsai works have a transaction price of 1.28 million. From this aspect, it can be seen that this is a bonsai tree species that is very popular among bonsai lovers. However, not all oak trees can be used as good bonsai materials, generally speaking, it is easier to use old piles for excellent oak tree bonsai.

Those Pu trees that grow in nature, shouting that they have generally been beaten by the wind and rain of nature for many years, and have not been less damaged and destroyed by us and some animals, including some insects and birds, so that they can only adapt and change in the evil growth environment, so that its branches form a variety of peculiar appearances, showing a ghostly posture. It can be said that the shape is natural, the artistic conception is self-contained, and it is a waste of talent not to use it as a bonsai. So, how should it be transplanted and cultivated?

First, digging piles to dig the time of the tree, it is recommended that it is the best in winter, you can choose to carry out before and after the big cold and small cold, if the conditions allow, it is best to plant on the ground, if you do not have it, you can also use a larger wooden box, foam box and other things for cultivation, in the beginning of 1-2 years of time to give him stocking, the maintenance of large fat and water, to promote rapid growth, in order to meet the needs of the shape and then pot, this way can shorten the cultivation time.

2. Conservation and management.

1. Light and temperature, Pu tree is a positive tree species, very light-loving, placed in the sunny outdoor maintenance is basically no problem, even in the hot summer Bi Raid Ye, do not need to shade it. It should be noted that in winter, it is a southern tree species, originally mainly grown in the south of the Yellow River, if it is maintained in the south, it can be buried in the soil outdoors for wintering, if it is in the north, it needs to be moved to a place with good indoor sunlight for management.

2. Watering, although the Pu tree likes to be wet, but it is also very dry, so, observe the situation of the potting soil when watering, it is better not to dry or water, generally speaking, 2-3 watering once in spring and autumn, and in the summer high temperature season, once a day is basically no problem, and in the dormant period of winter, it is necessary to appropriately reduce the number of waterings, usually, once a week or so.

3. Fertilization, Pu tree is a barren tolerant tree species, but it is also very fertilizer-loving, if the fertilizer is too little, its leaves will be yellow and lack luster. If too much fertilizer is applied, it will lead to leaf hypertrophy and affect the beauty of the bonsai. Therefore, it is very important to apply just the right amount of fertilizer, and generally speaking, during its normal growing season, it is enough to apply a thin cake fertilizer once a month.

4. Pruning, pruning is not only the main means of modeling, but also an effective way to maintain the health of bonsai. Therefore, there will be many pruning work during its growing season, and because of this, the modeling method of the oak tree is mostly the use of cutting off and storing branches.

Summary. Methods such as pruning and transplanting can be adopted to control the growth and development of bonsai.

Methods such as pruning and transplanting can be adopted to control the growth and development of bonsai.

Can you add, I don't quite understand it.

If the bonsai is too vigorous, you can consider pruning. First of all, choose the appropriate time for pruning, generally in spring and autumn as well. Secondly, the branches and leaves can be cut and shaped to maintain the shape and balance of the bonsai.

In addition, controlling the growth of plants by adjusting soil moisture and light to hail can also help achieve good pruning results. In the process of pruning, it is necessary to pay attention to the use of appropriate tools to keep the trees and tools clean and hygienic, so as not to affect the growth and health of the bonsai.

Summary. Hello, dear! It is best to use mixed soil with loose soil, good air permeability and strong water retention capacity for Pushu bonsai.

Explanation: The growth of Pushu bonsai requires a good growth environment, and soil is one of the important factors affecting plant growth. The use of mixed soils suitable for the growth of the tree can ensure that the plants receive sufficient nutrients and water, and can be conducive to plant growth and root development.

It is generally recommended to use a mixture of materials such as peat, humus and perlite, and the proportion can be adjusted according to the actual situation. Extension: In addition to the soil, the maintenance of the bonsai is also very important.

The suitable temperature for the growth of the tree is between 20-28, too high or too low will affect its growth. At the same time, oak trees also need light and the right amount of water. In the process of maintenance, attention should also be paid to controlling the occurrence of pests and diseases, and pruning and placing potted plants in time to maintain plant health and good ornamental effect.

Hello, dear! It is best to use mixed soil with loose soil, good air permeability and strong water retention capacity for Pushu bonsai. Explanation:

The growth of Pushu bonsai requires a good growth environment, and the soil is one of the important factors affecting plant growth. The use of mixed soils suitable for the growth of the tree can ensure that the plants receive sufficient nutrients and water, and can be conducive to plant growth and root development. It is generally recommended to use a mixture of materials such as peat, humus and perlite, and the proportion can be adjusted according to the actual situation.

Extension: In addition to the soil, the maintenance of the bonsai is also very important. The suitable temperature for the growth of the tree is between 20-28, too high or too low will affect its growth.

At the same time, oak trees also need light and the right amount of water. In the process of raising and caring for locust hocusts, attention should also be paid to controlling the occurrence of pests and diseases, and pruning and placing potted plants in time to maintain plant health and good ornamental effect.

Is it okay to use weathered stones, red jade soil, and cinders for the stump of the downhill pile.

Can you water the roots?

Hello, dear! , weathered stone, red jade soil, cinder can be mixed, but you need to pay attention to control the proportion and fertilization. At the same time, oak trees can be watered for the roots, but you need to pay attention to the amount and frequency of watering.

Explanation: The mixed use of weathered stone, red jade soil and cinder can provide the looseness, air permeability and water retention properties required for the growth of the tree. However, the proportion of the three materials needs to be adjusted according to the actual situation after the infiltration of the slag mold to ensure that the plants get sufficient nutrients and water.

In terms of fertilization, organic fertilizers and mineral fertilizers can be added in moderation, but it is necessary to pay attention to the amount and frequency of fertilization, so as not to burn the roots or affect the growth of plants. Pushu can be watered with root water, but you need to pay attention to the amount and frequency of watering. During the growing season, water at least 1-2 times a week, keeping the soil moist but not overwatering to avoid hypoxia and root rot.

At the same time, it is necessary to pay attention to the amount of water and the way of watering when watering to avoid washing the soil and roots.