How to connect the water heater to the basin, how to connect the electric water heater to the washba

The method of connecting the water heater to the basin is as follows: connect the water pipe to the basin at the other outlet of the water heater, and the hot water can be successfully connected.

The installation of water heater pipes and the installation of water heaters is a unified process, considering the installation of water heater pipes to determine the installation position of water heaters, this position has certain requirements, this requirement is to choose the wall position to ensure that it can withstand twice the weight of the water heater filled with water, and the fixtures of the water heater are installed, and it can also ensure that the water storage water heater has room for maintenance.

Install an electric water heater.

The main job is the installation of the upper and lower pipes of the water heater. The water heater water heater will be provided with a soft plastic hose at the end of the hot water tank, and the lower end of the water supply and water pipe is provided with a mixing valve, which is connected with the water pipe and sprinkler head at home, and the other end of the hot water tank has a connecting pipe for air intake at the upper part.

Before the renovation, it is necessary to make the hot water pre-buried pipe between the washbasin and the water heater.

Connect a T-shaped tee to the water heater outlet so that the hot water can be diverted to the shower (the shower needs to be installed with a control switch), the washbasin and the kitchen.

Connect the embedded hot water pipe to the hot water tap inlet on the washbasin with a hose, and then connect the cold tap inlet on the washbasin to the tap water.

In this way, hot water can flow out of the tap and the water temperature can be adjusted.

It's very simple, first of all, your basin faucet should be hot and cold, and then switch there to get a tee, one end to the tap water inlet pipe, one end to the basin faucet, and the last end to the shower, and that's it.

On the hot water pipe, connect a tee, and then connect a water pipe with inner wire at both ends from the top of the tee to the basin faucet, and you're good to go.

Connect the water pipe to the basin at the other outlet of the water heater.

The user can directly connect the hot water outlet of the electric water heater to the wash basin through the pipe.

Electric water heaters can be divided into three types: water storage type (also known as volumetric type or heat storage type), instant heating type, and rapid heat type (also known as semi-water storage type) according to the heating power. Although the volume of ordinary quick-heating electric water heaters and dual-mode electric water heaters is about the same, the internal structure is very different, and the quick-heating electric water heater is only smaller in size and more powerful than the storage electric water heater;

Therefore, it is indeed faster than the storage electric water heater in terms of heating speed, but it cannot achieve instant heating in spring and autumn, and it needs to be preheated, that is, it needs to wait, while the dual-mode electric water heater can be used in the instantaneous mode in spring, summer and autumn, which is instantaneous and hot.

A faucet with a mixing function for the wash basin will do.

1. Install a tee pipe fitting on the hot water outlet pipe of the water heater.

2. Connect the hot water pipe to the wash basin from this tee fitting.

3. Install a hot and cold double water inlet mixing faucet on the wash basin and connect it with the hot water pipe.

4. In this way, there are both hot and cold water, and the appropriate water temperature can be adjusted according to the need to mix water.

The following is a double inlet hot and cold faucet.

Hello dear! We will be glad to answer your questions. How to get the washbasin to quickly shout rotten water heater answer, pro:

From the cold water pipe of the wash basin, add a tee, and connect the cold water pipe on one side; One side is connected to the original wash basin with cold water; The other side is connected to the inlet water of the water heater. Water heater outlet (hot water pipe) connection: If you only need to connect to the wash basin, connect it directly; If you still need to connect to other places, add a tee to the outlet pipe, you need two water points, you can have any questions, you can give me feedback in time!

The following points need to be paid attention to when connecting an electric water heater to a washbasin:

1.Prepare tools: electric water heaters, washbasins, Huichang hot and cold water faucets, faucet hoses and pipe joints, pipe sealants, screwdrivers and other tools.

2.Choose a good location: First of all, you need to choose the location of the washbasin, and it is best to choose a position close to the washbasin before the slicer, so as to avoid the clutter and inconsistency in the process of installing the pipe.

3.Connect the faucet to the hose: Take out the faucet, apply sealant to the pipe port, attach the faucet to the washbasin, and secure it with a screwdriver. Subsequently, connect the hose to the faucet and the other end to the faucet adapter.

4.Installing the pipes: Then it's the process of installing the pipes.

First of all, it is necessary to pay attention to the height of the ground to ensure that the pipeline can be connected smoothly. Second, connect the hot and cold water taps to their respective pipes. Then, connect the cold water faucet to the inlet of the electric water heater, connect the hot water tap to the water outlet, and then connect the electric water heater to the pipe.

5.Connect the power supply: After connecting the pipe, you need to connect the plug of the electric water heater to the power socket and turn on and off the power supply, and it takes about 10 minutes to wait for the water temperature and flow rate to be controlled by the switch.

The above is how to connect the electric water heater to the washbasin, it should be noted that it is necessary to be careful during the installation process to ensure that each step is correct to avoid safety problems.

1. Connect the pipeline between the washbasin and the electric water heater. When the muxin flushing pipeline is connected, it is necessary to use special pipe joints to connect the pipes at both ends.

2. Install the Tanner valve on the joint and make sure the valve is not opened.

3. Find the corresponding water outlet on the electric water heater and connect the pipe to the water outlet.

4. Next, connect the inlet and water inlet of the hot water to the faucet during the day, so that you can use the faucet to control the working state of the water heater. When you need to use hot water, just turn on the faucet, turn off the faucet, and the water heater will stop heating.

When the water heater comes out, another port can be connected to the washbasin for hot water, but a tee needs to be installed to connect it.