I use the Midea wall breaker. Every time I use it, it has a burnt taste. What s that going on?

1. The motor runs at high speed, the internal temperature of the host reaches a very high level, no matter what is preheated, the smell will be released, which is a normal phenomenon, but it does not affect the use and health problems.

2. Burnt taste, Youken.

Improper operation, resulting in a paste bottom.

Broken. There is a problem with the quality and material of the machine.

4. The use time is too long.

5. New machine. Zigang.

The new motor is mainly wrapped with copper wire, and the better the quality of the motor, the thicker the copper wire. When the copper wire leaves the factory, it will be coated with a layer.

Insulator. Therefore, the motor is used in the early stage when the motor is heated.

Insulating oil. It will produce odors, which is a normal phenomenon.

Extended information: Midea wall breaker use.

Before attention. Matters:

1. Midea's wall breakers are currently designed with intelligent multi-functional wall breakers.

Electrically heated. function, so the maximum height of use is required, and it must be used below 2000 meters, otherwise there will be problems such as undercooking and overflow.

2. Some things that need to be paid attention to in the process of using the wall breaker.

Safety Matters. For example, it is strictly forbidden.

Idling. Voltage value, continuous.

Handling of working hours and overheating, etc., as well as avoiding accidents that may occur.

3. Pay attention to cleaning and maintenance when using the wall breaker, and pay attention to the blade when cleaning, the blade of the wall breaker is very sharp, and it is necessary to avoid cuts. Frequent use is the best way to maintain the machine, so that the wall breaker can be in a dry state, if not used for a long time, the machine is placed in a dry and ventilated place to avoid the motor from moisture.

4. Exception analysis and handling. In the process of using the wall breaker, you may encounter some abnormal symbols and situations that you don't understand what it means, and you can't solve it.

Send local after-sales service.

1. The reason why the wall breaker has a burnt smell.

2. One is that there is a problem with the quality and material of the wall breaker.

3. One is that you use it for too long at one time.

4. If both reasons are ruled out.

5 That's the normal taste, don't worry about normal use.

It should be the smell of electric sparks caused by carbon brushes, if it is not the smell of overload, heating or other circuit burning, it should be normal.

I use the Midea wall breaker. Every time I use it, it has a burnt taste. What's that going on?

Hello, there are the following situations: 1. The motor runs at high speed, and the internal temperature of the host reaches a very high spring, no matter what is preheated, it will release the taste of the green ant, which is a normal phenomenon, but it does not affect the use and health problems. 2. Burnt taste, improper operation of Youken, resulting in paste bottom.

3. The quality and material of the wall breaker are not up to standard. 4. The use time is too long. 5. The new machine is a little similar to the smell of burnt at the beginning of use, and the new motor is mainly wrapped by copper wire, and the better the quality of the motor, the thicker the wrapping layer of the copper wire.

When the copper wire leaves the factory, it will be coated with a layer of insulator. Therefore, in the early stage of power-on use, when the motor heats the insulating oil, it will produce peculiar smell, which is a normal phenomenon.

I use the Midea wall breaker. Every time I use it, it has a burnt taste. What's that going on?

I use the Midea wall breaker. Every time I use it, it has a burnt taste. What's that going on?

Hello dear, 1. The motor runs at high speed, and the internal temperature of the reed cavity host reaches a very high level, no matter what is preheated, the silver shout will release the taste, which is a normal phenomenon, but it does not affect the use and health problems. 2. Burnt taste, improper operation of Youken, resulting in paste bottom. 3. The quality and material of the wall breaker are not up to standard.

4. The use time is too long. 5. The new machine is a little similar to the smell of burnt at the beginning of use, and the new motor is mainly wrapped with copper wire, and the better the quality of the motor, the thicker the wrapping of the copper wire. When the copper wire leaves the factory, it will be coated with a layer of insulator.

Therefore, in the early stage of the motor in the process of power-on, when the motor heats the insulating oil, it will produce peculiar smell, which is a normal phenomenon. Or you can call customer service** to inquire about it! A4008899316 hope to help you.

1. The reason why the wall breaker has a burnt smell.

2. One is that there is a problem with the quality and material of the wall breaker.

3. One is that you use it for too long at one time.

4. If both reasons are ruled out.

5 That's the normal taste, don't worry about normal use.

This is your machine, and the problem should be the smell of your engine's tangled wires, so you have a burnt smell every time you use it.