When is Ye Xian easy to live with cuttings? How do I make cuttings?

Ye Xian cuttings should pay attention to sufficient sunlight, large moisture, large fertilizer, and focus on cultivating one or two branches, which can grow to the thickness of a pencil back then, but it will take several years to grow to the thickness of a thumb. Ye Xian's cold resistance is not good, especially in areas where it can reach below zero in winter and there are no heating facilities. Don't blindly pursue the choice of rootstock.

Leaf fairy cutting should pay attention to temperature control. The temperature should be 20-26 degrees. Ye Xian enjoys high temperatures and ice-free periods in their place of origin.

Compared to other cactus varieties, it is less drought-tolerant, hardy, and prefers thin fertilizers.

Secondly, it can safely overwinter indoors above zero degrees, and the leaves will fall at about 5 degrees, but it will not affect the normal germination of the following year. Normal growth can be maintained above 10 degrees, and growth is most vigorous above 25 degrees. In the leaf fairy cuttings planting, it is best to use humus loam, humus loam is rich in organic matter, good air permeability, can be used furnace ash, rotten leaves, garden soil press 1:

Formulated in a ratio of 1:1, the disadvantage of Ye Xian is that it is too afraid of cold. It grows at temperatures between 15 and 35 degrees, and it doesn't matter if it's hot.

But in winter, it will be dormant when it is lower than 10 degrees, which is the biggest disadvantage of Ye Xian, in fact, it is very simple to cut Ye Xian. As long as the cuttings can be cut during the growth period of the leaf fairy, when the cuttings are easy to survive, cut off a section of the leaf fairy branches or shoots, dry the branches at the bottom, and insert them in the moist soil to take root. The shoots can take root if they are inserted in the wet soil, and even the leaves can take root and sprout when they are inserted in the soil, and the germination speed is relatively fast, and the seedlings can be obtained in about two months.

The leaf fairy actually belongs to the cactus family as well.

Because of this, he is often used as a rootstock for grafting cacti. People often use cuttings and grafting for propagation, among which the cuttings method has the highest utilization rate. When is the cutting time of Ye Xian?

Cuttings can usually be carried out during the growth period of leaf immortals, and the survival rate of cuttings is highest at this time. When cuttings, whether they are made of young shoots or hard branches, they are inserted in a soft and breathable substrate, and they will soon take root and survive.

Ye XianIt is a perennial shrub plant of the cactus family, with slender and thick branches, and can grow vine-like climbing. Water the soil with water in advance before cuttings, level the soil surface, gently compact, and insert the pruned leaf fairy incision into the moist soil after it is slightly air-dried

Mainly in spring, summer and autumn to do cuttings operation, when the temperature is between 20 and 35 degrees, the survival rate is almost 100%; In winter, when the temperature reaches about 20 degrees Celsius, it is also possible to cut in a sunny place. When making cuttings, whether it is a weak or strong 1-2-year-old branch, the length of more than two centimeters can be used as cuttings.

Cuttings can be used in spring, summer and autumn, and are more likely to survive when the temperature is between 20 and 35 degrees.

When cuttings, pay attention to the length of the branches as much as possible more than two centimeters, cuttings in loose and breathable sandy loam, need to keep the soil moist, sufficient light, 10 days to half a month to grow a large number of roots. The survival rate is still extremely high.

Leaf fairy cuttings in spring or summer, it is easier to survive, because the light and temperature at this time are the most suitable; When cuttings, prune the roots at night, then place them in a cool and ventilated place to dry, and wait for the cuts on the branches to close slightly before planting.

From May to September, cuttings are easy to survive. Choose strong shoots that are one or two years old, which have a stronger germination ability and can take root faster.

The time of leaf fairy cuttings is in 5-9 months, choose the branches that grow robustly, remove the leaves at the bottom of the branches, only keep 1-2 pairs of leaves at the top of the branches, and put them in a cool and ventilated place to dry for half an hour, and wait for the incision on the branches to dry slightly, insert the leaf fairy branches into the moist soil and place them in a cool and ventilated place.

Leaf fairy is also called tiger thorn vine, leaf unicorn, it is a kind of ornamental plant of the cactus family, leaf fairy is erect, and it is easy to branch, but also resistant to pruning, propagation is generally based on cuttings.

Ye Xian cutting time.

Ye Xian is suitable for cuttings in spring, summer and autumnAmong them, May to September is the most suitable, the temperature can be guaranteed at 20-35 degrees, and the survival rate can reach 100%., the temperature is relatively low in winter, and it is easy to get frostbite if you take cuttings at this time, resulting in the death of Ye Xian.

Ye Xian gave instructions on the method of cuttings.

1. Cut the cuttings

Pick a sturdy branch and cut it into small sections, as there are small hard thorns on the stem. Hongchun so in the process of pruning cuttings must wear gloves, after pruning the cuttings, to remove the leaves at the bottom of the branches, only keep 1-2 pairs of leaves at the top of the branches.

2. Prepare potting soil

Prepare loose and fertile nutrient soil, which can be purchased directly or prepared with a mixture of peat, humus and coarse sand. After the disinfection treatment is done, the soil is watered with water in advance, and finally the soil surface is leveled and gently compacted.

3. Insert the soil

The pruned cuttings can be placed in a cool and ventilated place to dry for half an hour, and after the cuts on the branches are slightly dried, the leaf fairy branches can be inserted into the moist soil. Gently press the soil around the shoots by hand to make it tightly bound to the soil, which is conducive to the later rooting of the plant.

Leaf fairy cuttings take root.

After the leaf fairy cuttings are completed, they are placed in a cool and ventilated place for maintenanceKeep the potting soil slightly damp, and it can take root in about 2 weeks at an ambient temperature of about 15-25After survival, it only needs to be carefully maintained for 1-2 months before it can be used as a grafted rootstock.

1. Cut the cuttings, select the branches of the plant that grows robustly, and cut the branches into a number of small segments, because there are hard small thorns on the stem of the plant, so you must wear gloves in the process of pruning the cuttings, and after pruning the cuttings, you should remove the leaves at the bottom of the branches, and only keep the 1-2 pairs of leaves at the top of the branches.

2. Prepare potting soil, prepare loose and fertile nutrient soil, you can directly buy ready-made, you can also mix peat soil, humus soil and coarse sand, water the soil with water in advance before cuttings, soil moisture to "hold into a ball, touch it is appropriate", and finally level the soil surface, gently compacted.

3. Insert the soil, the pruned leaf fairy cuttings can be placed in a cool and ventilated place to dry for half an hour, and after the incision on the branch is slightly dried, the leaf fairy branch is inserted into the moist soil, and the soil around the branch is gently compacted by hand to make it closely combined with the soil, which is conducive to the later rooting of the plant.

4. Maintenance after cuttings, after the completion of the leaf fairy cuttings, you need to move the potted plants to a cool and ventilated place to keep the soil always slightly damp, and wait for the leaf fairy branches to take root, gradually increase the light of the maintenance environment, and wait for the leaf fairy root system to grow full of cuttings containers, and gradually replace the larger pots.

<>1. Cut the cuttings, select the branches of the plant that grow robustly, and cut the branches into several small segments, because there are hard small thorns on the stem of the plant, so you must wear gloves in the process of pruning the cuttings, and after pruning the cuttings, you should remove the leaves at the bottom of the branches, and only keep the 1-2 pairs of leaves at the top of the branches.

2. Prepare potting soil, prepare loose and fertile nutrient soil, you can directly buy ready-made, or you can mix peat soil, humus soil and coarse sand to prepare slowly, water the soil with water in advance before cuttings, soil moisture to "hold into a ball, touch it and disperse it is appropriate", and finally level the soil surface and gently compact.

3. Insert the soil, the pruned leaf fairy cuttings can be placed in a cool and ventilated place to dry for half an hour, and after the incision on the branch is slightly dried, the leaf fairy branch is inserted into the wet soil of the tide dust mold, and the soil around the branch is gently compacted by hand to make it closely combined with the soil, which is conducive to the later rooting of the plant.

4. Maintenance after cuttings, after the completion of the leaf fairy cuttings, it is necessary to move the potted plants to a cool and ventilated place to keep the soil always slightly damp, and wait for the leaf fairy branches to take root, gradually increase the light situation of the maintenance environment, and wait for the leaf fairy root system to grow full of cuttings containers, and gradually replace the larger pots.

1. Cut the cuttings

Select the branches of the plant that grow robustly, cut the branches into several small sections, because there are hard small thorns on the stem of the plant, so be sure to wear gloves in the process of pruning the cuttings, and after pruning the cuttings, you should remove the leaves at the bottom of the branches, and only keep 1-2 pairs of leaves at the top of the branches.

2. Prepare potting soil

Prepare loose and fertile nutrient soil, you can buy ready-made directly, you can also mix peat soil, humus soil and coarse sand, water the soil with water in advance before cuttings, soil moisture to "hold into a ball, touch it is appropriate to disperse", and finally level the soil surface, gently compacted.

3. Insert the soil

The pruned cuttings can be placed in a cool and ventilated place to dry for half an hour, and after the incision on the branch is slightly dried, the leaf fairy branch is inserted into the moist soil, and the soil around the branch is gently compacted by hand to make it closely combined with the soil, which is conducive to the rooting of the plant in the later stage.

4. Maintenance after insertion.

After the leaf fairy cuttings are completed, it is necessary to move the potted plants to a cool and ventilated place to keep the soil always slightly damp, and after the leaf fairy branches take root, gradually increase the light of the maintenance environment, and gradually replace the larger pots after the leaf fairy root system is full of cuttings containers.

Yes, the survival rate of Ye Xian is generally high in spring, summer and autumn, of which 5-9 months is the most suitable, the temperature can be guaranteed at 20-35 degrees, the survival rate can reach 100%, it is not recommended to carry out cuttings in winter, at this time it is easy to frostbite Ye Xian, seriously resulting in death.

Ye Xian is also called Ye Qilin, Tiger Thorn Vine, it belongs to the cactus family Cactus is a fleshy shrub, it used to be relatively unpopular, in recent years because of a variety of horticultural grafting and popular, its erection is good, grafting operability is strong, can be used to graft many cactus family homogeneous plants, such as: crab claw orchid, false epiphany, cactus finger, white sandalwood, etc.

1. The leaf fairy itself is also an ornamental plant, also known as the leaf cactus, which is different from the general fleshy cactus in appearance, it is a primitive cactus with leaves and woody stems, and it is also a kind of Chinese herbal medicine, which is very common in Yunnan, Fujian and other places in China.

2. The branches of the leaf fairy are soft and erect in the seedling stage, and with continuous growth, they will continue to form branches, and slowly become climbing shrubs, and the woodiness of the branches will also increase, and thorns will grow from the old stems.

3. The root system of leaf fairy is developed, the growth rate is fast, and it can bloom after 1-2 years of breeding, and the flowering period is generally in summer and autumn.

4. Ye Xian likes a sunny, warm and humid environment, does not sleep in summer, but is not tolerant to severe cold, warm southern areas can be directly planted in the courtyard, and the wintering temperature in the northern region needs to be kept above 5 degrees, otherwise it will fall because of easy frostbite.

Ye Xian is very easy to take cuttings, its main way of reproduction is to propagate by cuttings, whether it is a branch cuttings or leaf cuttings, it is very easy to survive almost 100%, can be cut to survive.

Ye Xian is also called Ye Cactus, wood unicorn, is a plant of the Cactus family, it is often used as a rootstock, because its affinity is better, and the root system is more developed, after grafting into a fast life, Ye Xian drought and waterlogging resistance is very good maintenance, cuttings are very simple, just cut off the branches of Ye Xian, whether it is cuttings in the soil or with water cuttings are very easy to root, leaf cuttings can also survive, but the buds are relatively slow, it takes a few months, so, usually we still use the branches with bud points to cuttings.

The cultivation method of leaf immortals.

1. Substrate: The requirements for the substrate are not particularly high, but the appropriate substrate is beneficial to its growth. It is better to choose loose ones that contain more nutrients.

2. Temperature: It is best in the warm range. In winter, it is best not to lower than five degrees, and it is best to maintain it indoors.

3. Illumination: It is enough to provide scattered light, not too strong.

4. Water: Watering should not be excessive, and water should not be accumulated.

5. Fertilizer: There are requirements, but it can be applied once a month. Animal manure can be used, "fertile leaf" compound fertilizer, etc.

Leaf fairy is a common ornamental plant whose branches can be propagated by cuttings. In order for the cuttings to take root and grow, it is necessary to choose the right soil and method for the branches.

It is best to use loose, breathable, well-drained planting media for the branches of cuttings, such as perlite, vermiculite, humus, peat and other loose media, which can enhance their air permeability and drainage.

Here's a simple way to cut it::

1.Choose healthy leaf fairy branches, about 10-15 cm in length, it is best to choose young shoots that grow at the top, remove one or two leaves at the top, and the number of remaining leaves should not exceed 3-4.

2.Insert the shoots into the appropriate size planting pots, fill them with the appropriate amount of planting medium, and gently compact them to ensure the stability of the shoots.

3.Water the right amount of water and cover the planter pot with a clear plastic bag or plastic wrap to maintain humidity and temperature.

4.Remove the plastic bag or plastic wrap every day or every other day and ventilate for a while to prevent excessive humidity and excessive heat.

5.After about 2-3 weeks, the new root system will start to grow, you can try to gently pull the branches, if there is resistance, it means that it has taken root.

6.Wait until the new root system grows to 3-5 cm long, you can transplant the new plant into a new pot and continue the maintenance.

It should be noted that during the process of cuttings, it is necessary to maintain a suitable temperature and humidity, and avoid direct exposure to the sun and overwatering, so as not to cause the branches of cuttings to die or grow slowly.