-
Anonymous users2024-02-12The rules of the interior decoration routine are:
1. The mirror is placed outside the ceramic tile that has been decorated, punched holes at the four corners, and the tile wall is integrated into the corresponding four holes, and then the plastic expansion nail is used to penetrate the wall, and then fixed with self-tapping nails and decorative covers.
2. Paste double-sided tape on the back of the mirror to position, and then use neutral and transparent (or similar to the color of the wall) to make a circle around it. This method does not hurt the tiles, and there are no traces when removed.
The above two methods facilitate the replacement of mirrors and prevent water mist leakage on the wall. It is also easy to install, disassemble, and replace, and it is also the best way for the overall appearance.
It is not recommended to hang the mirror directly on the cement wall and not put bricks on the back.
In this way, the water mist will leak a lot to the gaps of the wall, mirror and tile, which is not conducive to the fixing of the formed tiles. And the treatment of that kind of gap is also very troublesome, and it is not advisable for the overall beauty.
-
Anonymous users2024-02-111. The mirror is large, it is not recommended to fix it directly with glass glue, and punch holes in the four corners of the mirror to reinforce it with advertising nails. 2. The glass glue can be neutral, and the acidity will have a chemical reaction with the mirror coating, which is not suitable. 3. If the glass glue is not coagulated (solidified) in time, it should be supported by a simple bracket and dismantled after 24 hours.
4. Also, the strength of putty is low, the adhesion with the wall is poor, the humidity of the bathroom is high, it is not easy to directly glue on it, and it will fall off for a long time, which is a potential safety hazard.
-
Anonymous users2024-02-101.Small pieces of mirrors can be glued to tiles with neutral glass glue2Large mirrors are installed with decorative nails (first drill holes in the tiles, then put plastic sheets, and finally install) 3Paste a special pendant on the back of the mirror and hang it. (The method of installing hooks on the wall is the same as above).
-
Anonymous users2024-02-09Kaleidoscope crafting material].
1 glass knife, long strips of glass 3 6 cm wide, plastic tubes and plastic sleeves with a diameter of 4 7 cm, paper of various colors.
How to make a kaleidoscope].
1. Make the plastic pipe and glass strip into parts of equal length for standby according to the requirements, and then calculate the side length of the largest equilateral triangle in the circle according to the inner diameter of the plastic tube, and then use this size as the width of the glass to delineate the loose glass strip.
2 After forming a regular triangular prism with three glass strips, push them into the plastic tube, put some pieces of colored paper in the tube, then seal the two ends with round glass, and then put on the plastic sleeve.
3. For external packaging, it can be pasted with colored plastic paper or decorated with colored plastic paint.
Shower installation 1, the installation height of the shower shower, generally to the shower head in about meters, the shower head from the human head distance of about 40 cm is good. It is too close to use and inconvenient, it is easy to touch the shower, and the water temperature is lowered too far, wasting hot water. (The water temperature of the shower is sprayed from the sprinkler head and drops to the ground by 3-5 degrees) It can also be adjusted according to the height of the family. >>>More
Waterproof wall paint: performance is more important.
To decorate a bathroom, the walls are usually covered with tiles. However, the same bathroom wall material can no longer meet the individual needs, and the emergence of waterproof coatings and waterproof wallpaper provides a new opportunity for the "makeover" of the bathroom space. The formula of waterproof wall paint adds special waterproof and breathable molecules, which can form a dense paint film, so that water molecules cannot penetrate it, ensuring the breathing function of the wall, so it can be used on the wall of the bathroom. >>>More
The most suitable waterproofing material for waterproofing in the bathroom is polymer cement-based waterproof coating. This kind of product is a water-based coating, non-toxic, harmless and pollution-free, simple and fast construction, tight adhesion to cement substrate, long service life, strong waterproof effect, and moderate characteristics. The waterproof coating industry and the market trust and respect the big brand: >>>More
I use a glass door for bathroom decoration, and I think the material of the glass door is better, because the glass door is waterproof. When I went to the bathroom, I used a narrow-framed magnetic glass door. I think the quality is better than ordinary aluminum alloy glass doors and wooden doors.
When you set up a bathroom, the first thing that comes to mind is to decorate it with tiles. More and more decorators began to pay attention to personality, want to make the bathroom wall decoration alternative, colorful, so, after the bathroom wall bids farewell to the era of tiles, what materials will be used to replace it? A unique way to decorate the bathroom. >>>More