Have you ever used a Yili car washing machine?

The main difference is in the wattage of power and pressure.

I've tried, the difference is not very big, the pressure car wash is more than enough, it just depends on what accessories you choose, use a brush or something, these are the real car washes to use.

Pure flushing, more than 1000 watts, the pressure is fast 100 Pa, and it hurts to hit people.

Mainly brushes, consumables, depending on whether you wash the chassis, whether you wash the wheels, and so on.

In terms of performance, the main points are water output, power, and pressure.

Q6 is a basic model, and there are no special requirements that can be basically met. Accessories are almost the same.

Yili car washing machine is very garbage machine, with a few times will appear slow water out, or the problem of low pressure, constantly ask you to replace a thing called the relief valve, I calculated that the average wash 5 6 times to disassemble the machine to replace the relief valve wasted a lot of time and money, I just suffer from it, I hope you don't go into the pit, it is more expensive than going to the car wash.

It's rubbish indeed! And the water is very slow, often leaking, not getting water, and the most important thing is that the noise is heard by the whole city.

Yili car washing machine, senior victim, poor quality, after-sales is more pitted.

I spent 459 in Jingdong in April and May in April and May in Jingdong to buy,Model 4650 or what I can't remember,I haven't had a situation until now,Of course, you have to deal with the debris on the water filter diligently,Otherwise, there will be slow water outlet,Low pressure and other problems,Recently, I found that the sound is a little loud,Ready to disassemble to see if you need to change the oil,Overall,Reliable performance,The effect is good,Some people say that Yili's machine is not good,It is estimated that it is a fake bought by a treasure or a lot, Anyway, mine has been used for more than three years, and there is no problem at all.

1. The machine cannot be startedThis can be due to the machine not turning on, the micro switch being damaged, the fuse blowing, or the relief valve assembly not working.

2. The effluent pressure is unstableThis could be a foreign object on the relief valve, clogged or stuck, or a damaged seal on the pump.

3. The machine stops when it is running, blockage of the check valve for inlet and outlet, uncertain power supply voltage, activation of thermal protection elements, partial blockage of the nozzle.

4. The machine vibratesGenerally, the water supply is insufficient, the nozzle is partially blocked, the filter is blocked, and the inlet and outlet check valves are blocked.

5. The machine is startedThere is no water, it may be because the pump, hose or accessories are frozen, there is no water supply, the filter is clogged, the nozzle is clogged. The above covers most of the problems that occur in car washes.

Hello, I bought Yili car washing machine, what is the reason for the lack of pressure?

Summary. Dear, I'm glad to answer for you: Which is the best Yili car washing machine?

Answer: Dear, Yili household high-pressure car washing machine YLQ5630C-15 billion force is a domestic brand specializing in household car washing machines, with a high market share. There are also quite a few models.

This Yili YLQ5630C-150 household car washing machine is cost-effective, with high-pressure punch and strong water output. It can be connected to the faucet, or it can absorb water from the bucket or pond, and the waterproof level of the machine is IPX5 level, and it has a child lock function to prevent children from playing around. The water pipe is also long enough, the inlet pipe is 5 meters, and the outlet pipe is 10 meters, so you don't have to worry about the distance and it is inconvenient to use.

And the water pipe is designed for easy storage. I hope mine can help you, if you have any questions you can contact me at any time, I will reply to you as soon as possible.

Dear, I'm glad to answer for you: Which is the best Yili car washing machine? A:

Pro, Yili household high-pressure car washing machine YLQ5630C-15 billion force is a domestic brand specializing in household car washing machines, with a high market share. There are also quite a few noisy models. This Yili YLQ5630C-150 household car washing machine is cost-effective, with high-pressure punch and strong water output.

It can be connected to the faucet, or it can absorb water from the bucket or pond, and the waterproof level of the machine is IPX5 level, and it has a child lock function to prevent children from playing around. The water pipe is also long enough, the inlet pipe is 5 meters, and the outlet pipe is 10 meters of key fiber, so you don't have to worry about the distance and it is inconvenient to use. And the water pipe is designed for easy storage.

I hope my reply can help you, if you have any questions, you can contact me at any time, I will reply to you as soon as possible.

Which configurations are necessary.

Which configurations of Yili car washing machine are necessary: water pressure, flow, motor, and battery life 4 indicators. 1.

Water pressure: As mentioned earlier, the car paint can withstand 30 100 kg of water pressure, and it is enough to choose a wireless car washing machine with a water pressure of 25 30 kg. Jianbi 2

Therefore, choosing more than 3L min flow rate is a choice that takes into account the design and efficiency of the wireless car washing machine. Motor: It is better to choose filial piety pure copper for the motor.

The pure copper motor has low resistance, low heating, smooth current, and no waste of heat, so it is not easy to burn out the connection point, which is more durable and energy-saving. 4. Battery life: What we want to pay attention to is its high-end battery life.

It is recommended to choose a high-end car wash with a battery life of more than 20 minutes.

Below 800 yuan, it is recommended to have a durable and powerful force.

Fever is normal.

Especially in the summer, the heat is full.

If it is particularly hot, it is necessary to consider the problem of the motor.

What's the problem with car wash pump heating?

1. Cut off the power supply and pour the remaining water: clean the ultrasonic humidifier.

Beforehand, the power should be cut off and the remaining water in the machine should be emptied. 2. Clean appearance: Usually use clean water and soft cloth to clean the appearance of the humidifier.

If the appearance of the humidifier is dirty and stained with oil, it is recommended that you use a neutral detergent to properly dilute it and wipe the appearance of the machine with a soft cloth, and wipe the appearance of the machine with water again after effective decontamination until the appearance is clean. 3. Remove scale: After using ultrasonic for a period of time, it is easy to accumulate scale inside the tank, sink, transducer and other parts, so regular removal of scale has become an important task for cleaning ultrasonic humidifiers.

There are mainly the following steps: a. Prepare to use a special scale cleaning agent; Prepare water (very good is softened water.)

and the exclusive use of brushes; c. Pour the special cleaning agent on the surface of the body with scale; d. After soaking for 5 minutes, use water and a soft brush to clean the scale; e. Use clean water to effectively clean the parts used with limescale detergent; f. Store carefully after continuing to use or drying the machine.

Bohur car washing machine is powered by 20V lithium battery, which not only has a long battery life, but also gets rid of the shackles of the power cord and is easy to use. It is also small in size, only the size of A4 paper, making it very easy to carry. At the same time, the accessories are complete, with multi-functional attributes, such as watering flowers, home gardening, and cleaning the floor at home, which can be used, and has a wide range of applications.

The water inlet of Yili car washing machine is very slow, and it often leaks air and cannot enter the water, and the most important thing is that it is noisy.

Hello dear, the reason why the car washing machine does not absorb water and is hot 1, check the water inlet end of the car washing machine, including the water inlet and filtration device, etc., to ensure that there is no blockage, if the spring stool is plugged, it will cause the car washing machine not to absorb water, just use the needle and wire to pass through. 2. Run the car washing machine, and then touch the body of the car washing machine with your hands to feel whether there is vibration, if there is vibration, it is a blockage or steam leakage in the water absorption position, and if there is no vibration, it should be a problem with the motor in the centrifugal water pump. 3. It may also be that the exhaust valve is leaking, the imitation round internal leather bowl is not vacuum pump or the pump head has any problems, if the exhaust valve is leaking or the leather bowl inside is not vacuum pump, it can be dismantled immediately, and if there is any problem with the pump head, only disassemble the pump head to check.

Summary. Hello dear and happy to answer your <>

<> Yili car washing machine is of good quality, it is a product with high efficiency and durability, and its quality has been widely recognized. 1. The car washing machine adopts high-quality materials and advanced production technology to ensure the reliability and durability of the product. During use, it is able to operate stably and is able to withstand long hours of use and repetitive operation.

2.The design of the car wash machine is very user-friendly and easy to operate and maintain. It is equipped with a series of intelligent control systems and safety devices, which can automatically control the water flow and pressure of car washing, reducing the difficulty of operation for users.

How about the quality of Yili car washing machine?

Hello dear dear, very happy to answer your <>

<> Yili car washing machine is of good quality, it is a product with high efficiency and durability, and its quality has been widely recognized. 1. The car washing machine adopts high-quality materials and advanced production technology to ensure the reliability and durability of the product. During use, it is able to operate stably and is able to withstand long hours of use and repetitive operation.

2.The design of the car wash machine is very user-friendly and easy to operate and maintain. It is equipped with a series of intelligent control systems and safety devices, which can automatically control the water flow and pressure of car washing, reducing the difficulty of operation for users.

Dear, here's a <> for you

<> Yili car washing machine, its cleaning and maintenance is also very simple, it only needs regular cleaning and lubrication, it can keep it in good working condition. Car washing machines are also highly efficient and energy-efficient. It adopts advanced energy-saving technology, which can effectively reduce energy consumption and reduce the cost of use.

To sum up, the quality of Yili car washing machine has been widely recognized, and its high efficiency, mountain closure durability, humanized design and energy-saving and environmental protection characteristics make it a highly regarded high-quality production and defense product.