-
1. Press and hold the "Settings" button for about 3 seconds, the prompt light will turn on, press the "Power" button, the prompt light will start flashing, ready to receive the signal from the TV remote control.
2。Operate the TV remote control. Put the TV remote control with an infrared emitter.
Aim at the transmitter of the remote control of the set-top box, (the infrared emitter is usually located at the very front of the remote control, shaped like a small light bulb, but it will not light up), and press the power button. At this time, the prompt light of the remote control of the set-top box will be solid again.
3。Operate the remote control of the set-top box and press the "Settings" button again to complete the function learning settings. The indicator light is off, indicating that the operation is complete.
-
Procedure (for example, learn the power button on the TV remote control):
1。Operate the set-top box remote control. Press and hold the "Set" button for about 3 seconds, the prompt light will stay on, press the "Power" button, the prompt light will start flashing, ready to receive the signal from the TV remote control.
2。Operate the TV remote control. Aim the infrared emitter of the TV remote control at the transmitter of the set-top box remote control (the infrared emitter is usually located at the very front of the remote control, shaped like a small light bulb, but it will not light up), and press the power button.
At this time, the prompt light of the remote control of the set-top box will be solid again.
3。Operate the set-top box remote control. Press the "Settings" button again to complete the function learning settings. The indicator light is off, indicating that the operation is complete.
-
The docking method of cable TV set-top box remote control and TV remote control is as follows:
1. Press and hold the "set" setting button above the learning remote control (set-top box) for about 2 seconds, and release the "set" setting button after the red light is on, and the remote control is on standby for learning.
2. Press the standby button of the remote control of the TV, the indicator light of the learning remote control will flash again and again, then press the standby button of the learning remote control learning area, and the indicator light will become solid on;
3. After learning a key, you can choose other keys to learn (such as: changing the key), and so on;
4. After successful learning, press the set-top box remote control to control the TV.
-
Press the setting on the remote control first, after the light is on, build according to the function you want to set, and then press the function key on the TV remote control. Then the light goes out, if it is built according to other functions, it is built according to the second TV function, and the end is automatically ended by setting or waiting for a few seconds.
Give it a try, hope it helps.
-
Adjust the sound of the TV in the appropriate position, and only use the remote control of the set-top box to change the channel and adjust the volume. It is best not to turn off the TV with the remote control.
FAT16, FAT32, NTFS, EXT3, Processor: ARM Cortex-A9, OS: , Memory: >>>More
All set-top boxes cannot be shared.
The network set-top box cannot be connected to the computer host, and it does not have that function. You're thinking too much.
I use the network TV box at home,But the kind I bought is very general,Easy to use,Mainly to see if your network speed is fast,The second is the set-top box,There are cheap,There are also expensive,Think of it as a small computer,The general is a built-in software,For examplepps、pptv,The better point is the computer,You can install software,Browser look**ah, etc.,There is also a built-in hard disk (can be buffered in advance),It's easy to use, If you have a router at home and a normal network, you can add another network cable to connect it to the set-top box.
To cancel the telecom IPTV service, you must go to the local telecom business office with a valid ID card and set-top box. IPTV is interactive network TV, which is a new technology that uses the telecom broadband network as the transmission channel and the TV as the terminal, integrating the Internet, multi-technology, communication and other technologies to provide home users with a variety of interactive services including TV content. Users can enjoy personalized, interactive, and customizable TV audio-visual services and value-added information and application services through network set-top boxes + ordinary TVs at home.